• 보존과학회지
• /
• 제37권1호
• /
• pp.43-54
• /
• 2021

In this study, a scientific analysis of the gold leaf layers and internal structure of the Clay Seated Vairocana Buddha Triad in Seonunsa Temple, Gochang (Treasure No. 1752) was conducted. The surface of the Buddha statues is a gold foil, and the gold leaf layer consists of four layers. The gold leaf layer first composed on the molding clay was produced in the order of lacquer-fabrics-lacquer-gold foil. Subsequently, it was confirmed that the work was performed three times in the same way. The composition of the Buddha statues was divided into the head, body or upper body, lower body, and pedestal. The body was made in a cylindrical form by connecting vertically oriented wooden materials, and the head and lower body were also connected to the body in an empty form. Thus, the head, body, and lower body are grafted structures that are connected to a single Bokjang-gong. It was confirmed that the Clay Seated Vairocana Buddha Triad in Seonunsa Temple was made using wood materials for the basic form, after which the detailed form was created with molding clay, and the surface was finished with a process of layering gold foil and substances presumed to be lacquer.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.1-7
• /
• 2016

This study was experimentally performed to analyze the growth characteristics of a plant(wax tree or privet) using the surface temperature measured from thermal images captured using a thermal camera with water and cider. To do that, this study measured every each 12 hours the surface temperature and the stem temperature of leaves attached to the plant sample until the plants wilt on summer season in the laboratory room. From the experimental results, this study revealed that the temperature of front and back of the leaves is a little different due to the pore. The mean surface temperature of a leaf in cider is $0.52^{\circ}C$ higher than that of a leaf in water. The phenomena that the leaves of plants fall could be also demonstrated using the surface temperature. Before a leaf is falling from the tree, the temperature of the stem is lowered about $2^{\circ}C$ than those of other parts in a leaf. This result can be validated from previous result performed in University of Wisconsin.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.118-126
• /
• 2003

In the present study, the residual stresses can have a significant on the life of structural engineering components. Residual stresses are created by the surface treatment such as shot peening or deep rolling. The objective of this experimental investigation is to study the influence of friction and wear characteristics due to residual stress under dry sliding condition. Friction and wear data were obtained with a specially designed tribometer. Test specimens were made of SUP9(leaf spring material) after they were created residual stress by shot peening treatment. Residual stress profiles were measured at surface by means of the X-ray diffraction. Sliding tests were carried out different contact pressure and same sliding velocity 0.035m/s(50rpm). Leaf spring assembly test used to strain gauge sticked on leaf spring specimen in order to measure interleaf friction of leaf spring. Therefore, we were obtained hysteresis curve. As the residual stresses of surfaces increased, coefficient of friction and wear volume are decreased, but the residual stresses of surfaces are high, and consequently wear volume do not decreased. Coefficient of friction obtained from leaf spring assembly test is lower than that obtained from sliding test. From the results, structural engineering components reduce coefficient of friction and resistant wear in order to have residual stresses themselves.

• 한국지리정보학회지
• /
• 제1권1호
• /
• pp.99-108
• /
• 1998

국지 기상 모형의 지표 특성을 표현하기 위해 토양 구분, 식생 구분, 지표 거칠기 길이, 지표 알베도와 엽면지수가 지면 과정 모수화 내에서 처방되어야 한다. 이 연구에서는 인공위성 관측값으로부터 계절함수로 얻어진 경,위도 1도 및 1도의 엽면지수, 지표거칠기 길이, 눈이 없을 때의 지표 알베도와 상세 격자 NDVI를 지면 과정 모형에 적용하였다. 생물권과 대기권 사이, 지면과 대기 사이의 상호작용에서 이러한 인공위성 자료를 사용한 것과 사용하지 않은 것을 비교함으로써, 열, 에너지 및 수증기 속들, 지면 기온, 바람, 식생 물함유량, 비습, 강수장의 민감도가 조사되었다.

• 한국가구학회지
• /
• 제21권4호
• /
• pp.284-292
• /
• 2010

This research was carried out to examine the properties of fancy cherry veneer overlaid on the PF resin bonded Meranti plywood floor, which 2.5% green tea leaf powder was applied in the UV varnishes and the adhesives for scavenging the volatile organic compounds. The results were as follows: 1. The various properties of the treated samples, such as density, moisture content, thickness swelling, bending strength(MOR), adhesion shear strength, surface abrasion, curling, cyclic delamination test with boiling water, boiling property, cold-resistance and heat resistance, acid resistance and alkali resistance, and anti-contamination property showed no significant difference between the properties of the control samples. 2.5% green tea leaf powder treated floor gave a little better results than the control for surface scratch test. 2. In case of QUV and weathering test, no difference between the treated sample and control was found. 3. The floor was discolored by adding 10% green tea leaf powder to UV coating, and the floor was also discolored to light green during by the soaking test. The color of floor was not changed up to 5% addition level.

• Journal of Ginseng Research
• /
• 제4권1호
• /
• pp.49-54
• /
• 1980

This investigation were carrion out to know the frequency, size and distribution of stomata in Korean ginseng, acanthopanax and codonopsis. The results are as follows; 1. Stomatal frequency in ginseng leaf was remarkably less than those of acanthopanax and codonopsis leaf, but size of stomata in ginseng leaf was larger than those of acanthopanax and codonopsis leaf. 2. Stomatal frequency of one year old ginseng plant was higher than those of the older. Two to five years old ginseng plants were not differed in frequency and size of stomata. 3. Frequency and size of stomata were higher and larger in red-berry variant in compare to yellow-berry variant. 4. Stomatal frequency in different leaf Position was not significantly different among those of middle leaf, first side leaf and second side leaf, but in decreasing order of middle Part, upper, lower part and edge in the same ginseng leaf. 5. Stomata was not seen in adaxial surface and petiole of leaf ginseng, acanthopanax and codonopsis. 6. Stomatal frequency was higher in ginseng plant grown under no$.$shading compared to shading, and that of ginseng plant in rear line was less than that of front line under the same shade roof.

• 한국조경학회지
• /
• 제35권6호
• /
• pp.29-36
• /
• 2008

This study examined the de-icing agents' stresses on Pinus strobus and Pinus thunbergii by chlorophyll fluorescence analysis. The assumption of this study was that photosynthetic efficiency was changed by de-icing agents applied onto highways in winter by altering the concentration of the de-icier, types of de-icer and leaf surface coating liquid application. The practical purpose of this study was to investigate the de-icing gents stresses on Pinus strobus by the highway area where de-icing agents were used frequently and to discover out minimizing stratages to prevent further damages. or this simulation study, a sample plot was established in Bogae-myeon, Anseong, Gyeonggi-do and Pinus strobus and Pinus thunbergii were planted for the examination in April, 2005. Five types of de-icing agents - NaCl, $CaCl_2$, T product(NS40:low cWoride de-icer type), NaCl+$CaCl_2$ and T product+$CaCl_2$ - were selected and the their concentration was altered to 0%, 5%, and 9%. Five types of de-icing agents were applied to both trees treated by a leaf surface coating liquid and trees not treated by leaf surface coating liquid. For the fluorescence analysis, the leaf surface coating liquid, which was diluted by 10 times, was sprkinkled onto the two tree species three days prior to gathering samples. Sample leaves from the two tree species were gathered at 10 o'clock in the morning of mid-August, 2006 and brought to the laboratory within three hours to be dipped in different concentrations (0%, 5%, or 9%) of the five de-icing agents for two minutes. Then the eaves were placed on the filter paper dipped in each solution on a petri dish, sealed with polyethylene film and kept in a growth chamber at $22^{\circ}C$ for 72 hours. Out of the growth chamber, the leaves were treated with a chorophyll fluorescence reaction analyzer for 30 minutes to measure the initial light acceptance rate(Fo), maximum light acceptance ate(Fv/Fm), light acceptance usage(F' q/F' m) and optical electron delivery coefficient(qP). As a result, Pinus strobus' initial light acceptance rate(Fo) decreased as T product and NaCl increased in concentration, and $Cal_2$ did not reduce much with the eaf surface coating liquid application. Maximum light acceptance rate(Fv/Fm) and light acceptance usage(F' q/F' m) decreased sharply as T product and NaCl increased in concentration and NaCl+$CaCl_2$ and T product+$CaCl_2$ did not reduce much with leaf surface coating liquid application. Optical electrons delivery coefficient (qP) decreased as T product increased in concentration on trees without the leaf surface coating liquid application and all other de-icing agents did not show much reduction. As for Pinus thunbergii, the initial light acceptance rate(Fo) decreased as T product increased in concentration, but the maximum light acceptance rate(Fv/Fm) was not reduced much by changes in concentration. light acceptance usage(F' q/F' m) decreased as NaCl increased in concentration and optical electron delivery coefficient(qP) decreased as NaCl increased in concentration in both with and without leaf surface coating liquid application. In conclusion, it was possible to plant Pinus strobus if spraying leaf surface coating liquid or cleaning deicing salt to prevent the damage caused by deicing agents was more economical than replacing the trees. If not, it was better to plant Pinus thunbergii. Another way to decrease the deicing gents stresses of landscape plants would be planting the trees further away from the roads even though it might take longer period to display its planting functions.

• 한국작물학회지
• /
• 제36권6호
• /
• pp.560-567
• /
• 1991

콩잎의 광합성능력이 잎의 내부형태 변이와 관련되어 있는지 검토하기 위해 대두품종 ‘Hodg-son 78’을 공시하여 포장실험을 수행하였다. 잎의 내부 형태면이를 촉진시키기 위해 착협시(R3 stage)에 유아주기 (1m이랑당 26주에서 6.5주)와 곁가지 치기를 통해 source활성 증대를, 계속적인 꼬투리 제거 (절위당 한개의 꼬투리만 남김)를 통해 sink활성 감소를 시도하였다. 협신장기(R4 stage)로부터 3-4일 간격으로 5회에 걸쳐 제 10절위 복엽의 중앙소엽을 대상으로 기체교환특성, 잎의 두께, 엽육세포의 체적 및 표면적, 그리고 주변 미기상변수를 측정하였다. 가설검증을 위해 기존의 광합성모형을 엽육세포의 표면적이 기체확산과, 엽육세포의 체적이 생화학적 활성과 관련되도록 수정하였다. 실측 광합성속도의 변이가운데 79%는 이 수정된 모형에 의해 설명 가능하였으며, 엽내부형태의 영향을 무시한 기존의 광합성모형에 비해 평균 14.5%의 추정능력 향상을 확인할 수 있었다.

• 폴리머
• /
• 제37권4호
• /
• pp.411-419
• /
• 2013

다양한 생체재료들이 이식용 인공장기나 의료용 장비로 폭넓게 사용되고 있으나 혈액과 접촉하는 경우가 많아짐으로써 발생되는 혈전의 문제로 인해 이식재와 혈액간의 혈액 친화성의 향상이 연구자들에게 관심의 대상이 되고 있다. 연잎의 표면구조는 항 오염 특성이라는 측면에서 많은 연구가 진행되어 왔으며, 산업적인 용도로 적용하고자 하는 주된 시도들이 있어 왔다. 대부분 주형법이나 졸-젤 방법, 층 쌓기 방법 등을 포함한 다양한 기법으로 표면처리를 함으로써 인위적인 모사가 가능해 왔다. 최근에 들어 이러한 표면의 초소수성 성질이 의료용 재료의 표면처리 기법으로써 혈관 이식재에서부터 항 박테리아용 표면에까지 널리 적용하려는 시도가 진행되고 있다. 본 리뷰논문에서는 최근 많이 사용되는 연잎 구조로의 표면처리 기법들을 중심으로 요약하였으며, 이들을 이용한 의료분야로의 적용 시도들을 정리하고자 하였다.

• 식물분류학회지
• /
• 제44권2호
• /
• pp.91-99
• /
• 2014

곰솔의 지역간 잎 형태 변이를 이해하기 위하여 한반도의 해안지역 12군데에서 채집한 곰솔의 잎 해부형태를 비교 연구하였다. 곰솔 잎의 해부학적 특징은 섬유상 표피, 2-3층의 하피, 표피보다 내려앉은 기공구조, 한가지 형태로 구성된 엽육조직, 뚜렷한 유관속초 등을 가진 전형적인 바늘상 잎이다. 곰솔 잎에 있어서 수지도는 발생위치에 따라 유관속초의 외부, 중간, 내부 등 3가지 분포형태로 구분되었다. 조사된 모든 재료에서 수지도의 개수는 4개에서 12개까지 지역간 변이가 관찰되었다. 기공은 잎 전체를 통하여 기공선으로 발달하였다. 곰솔 잎 해부형태에서 관찰된 중요한 차이는 수지도의 발생위치와 전체개수 그리고 잎 표면에 나타나는 기공의 기공선 개수이었다.