• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.175-176
• /
• 2018

We have developed liquis precursotr delivery system (LDS) for ultra thin film preparation in semiconductor devices. The LDS concists of 3 major parts : aerosol generator, vaporizer and vapor storage. By uaing LDS which was attached to plasma enhanced chemical vapor deposition system, thin Al2O3 layer was prepared at extremely low temperature and characterized.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.401-406
• /
• 2002

As product lifecycles become shorter, factories are pushed to develop small batches of many different products. The highly flexible control systems has become a necessity. The majority of existing automated industrial systems are controlled by programmable logic controllers(PLCs). In most cases, the control programs for PLCs are developed based on ladder diagrams(LDs). However, it is difficult to debug and maintain those LDs because the synthesis of LD itself mainly depends on the experience of the industrial engineer via trial-and-error methods. Hence, in this paper, we propose a discrete event model conversion algorithm for systematic analysis of LDs. The proposed discrete event model conversion algorithm is illustrated by an example of a conveyor system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.86-93
• /
• 1995

Linwidth enhancement factor .alpha., linwidth, chirping and differential gain characteristics were measured and compared for each DFB-LDs containing active layers composed of bulk, MQW, and S-MQW, respectively. .alpha. of 6, 4 and 3.2 and chirping measured under 2.5Gbps modulation of 1.29nm, 0.67nm and 0.48nm were given for DFB-LDs of bulk, MQW and S-MQW active layers, respectively. And S-MQW has the largest differential gin of 2.4*10$^{-15}$ cm$^{2}$ (S-MQW) compared to the of 5.4*10$^{-16}$ cm$^{2}$(bulk) and 8.6*10$^{-16}$ cm$^{2}$(MQW). Linewidth enhancement facter .alpha. of less than 2 is expected with p-type modulation doped S-MQW DFB-LD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.46-51
• /
• 2006

We present simulation results for a method designed to extract key parameter values of DFB-type LDs based on ASE spectrum measurements. Comparisons were made between the given (actual) and the extracted (estimated) parameters, as well as the associated spectra, fur a variety of DFB-type LDs, and the two sets of results were found to be in excellent agreement.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.286-291
• /
• 2003

Asymmetric multiple quantum well ridge waveguide laser diodes (AMQW RWG LDs) with a wide and flat gain spectrum were designed and fabricated. The operating parameters and gain spectra were measured and analyzed for uncoated and anti-reflection (AR) coated LDs. For AR coated 500 mm-long RWG LOs, the extremely flat gain spectrum over a spectral range of 90 nm was obtained at the current 75 ㎃.

• Journal of Chest Surgery
• /
• v.52 no.5
• /
• pp.376-379
• /
• 2019

Concomitant Loeys-Dietz syndrome (LDS) and hematologic malignancies are exceptionally rare. This is the first report of a patient operated on for aortic root dilation who had been previously diagnosed with LDS and B-cell-lymphoma. After completion of chemotherapy and complete remission, an elective valve-sparing aortic root replacement (using the David-V method) was performed. Due to the positive family history, preoperative genetic counseling was conducted, and revealed LDS with a TGFBR1 (transforming growth factor beta receptor type I) mutation in 6 probands of the family, albeit in 1 of them posthumously. This missense mutation has been previously described in relation to aortic dissection, but a causative relationship to malignancy has so far neither been proposed nor proven.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.718-719
• /
• 2015

As a recent global trend, the majority of plant projects are delivered through EPC or EPC-turnkey contracts, where a contractor's liability is more complicated because of the mega size scale and financing method. Previous researches have been lacking a practical usability for project members for liabilities of contracts. Those were focused on solving the claims or schedule calculation issues only. The objective of the present study was to develop a validation process for LDs (liquidated damages) in contractor's liabilities with various case studies and expert judgments. As summarized in this paper, the processes and tools were developed with project life cycle process. The project preparation phase includes 3 step check lists to determine the Go or No-go for projects. In progress phase, contractors should focus on the response strategies for claims with liabilities. The study concludes that those developed processes and tools will help to manage risk of LDs for the contractors in the overseas projects.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.108-108
• /
• 2001

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.118-119
• /
• 2013

High power, short wavelength red laser diodes (LDs) have attracted significant interests in a variety of fields due to their advantages in terms of reliability, compactness and cost. The higher brightness for human eyes is required, the shorter wavelength like 630 nm is necessary with higher output power. In this respect, LDs are promising as alternative candidates of gas or dye lasers for such applications due to their small size, high optical/electrical power conversion efficiency, robustness and so on. The crystalline quality of GaInP-AlGaInP multiple quantum wells (MQWs) and AlInP cladding layers is a crucial part in the device performance of GaInP red LDs. Here, we first investigated the effect of Si diffusion on the optical properties of GaInP-AlGaInP MQWs grown with different growth temperatures. Secondary ion mass spectroscopy (SIMS) measurements revealed that both the Mg and Si diffusion into MQW active region was significant. To reduce such diffusion, we employed undoped Mg and Si diffusion barrier and could improve the properties.Without both Mg and Si diffusion barriers, no lasing emission was observed. However, lasing emission was observed clearly for the red LDs with both Mg and Si diffusion barriers. We then investigated the temperature dependent optical properties of MQW layers grown with different well thicknesses (6, 8 and 10 nm). When the well thickness was 10 nm, the better crystalline quality was obtained. However, the observed LD performances were similar, probably due to the defects and impurities in the AlGaInP layer. Further investigation with the detailed analyses will be presented later.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.11
• /
• pp.532-537
• /
• 2006

Lightning induced faults accounts for more than 66% at the transmission lines of KEPCO. The lightning causes damages to power system equipments including transmission line, the blackout of electricity and the electro-magnetic interference. Because of this reason, we need the real time lightning information for the optimal operation of power system. And, it is required to obtain and accumulate the lightning current parameters for the insulation design. In 2005, KEPRI constructed a lightning detection network, the KLDNet (i.e. Kepco Lightning Detection & Information System) and launched a lightning information service for KEPCO customers. It is intended to provide data service on the operation of transmission lines and collect lightning-related data, which is the most important factor regulating power system design and operation. The new system will replace LPATS, the old detection system, which has been operating since 1995 and is rapidly failing in terms of both detection performance and location accuracy. The purpose of this paper is to explain the work performed and the results of that work in performing a site survey of several locations. The purpose of the site survey is to find locations acceptable for the installation of a lightning location receiver in support of a Lightning detection system(LDS). A restriction was placed on the surveyed locations, as they must belong to the Korea Electric Power Company. This requirement was made to facilitate the communication needs of the LDS network. Total of 15 sites were evaluated as possible LDS sensor sites. Some of the sites were rejected for physical reasons and therefore no electrical testing was performed. Of the 15 sites, total of 10 sites were considered acceptable and 5 sites were rejected for various reason. In this paper, we would like to explain the site survey and detection efficiency for LDS.