• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.199-200
• /
• 2009

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.6-11
• /
• 2009

The LDS(Laser Direct Structuring) process uses thermoplastic polymers with a additive compound that serves as plating seed after the activation by laser. It can realize industry requirement such as miniaturization of electrical component, design flexibility and reduction of production steps. The purpose of this study is to introduce LDS, and to investigate the fundamental mechanism. Also the characteristics of conductive patterns were investigated with respect to laser fluence and intensity. We have used a pulsed fiber laser (wavelength : 1064nm) and copper electroless plating to fabricate conductive patterns. The result showed that laser induced metal-organic complex was caused metalization by electroless copper plating, the critical laser fluence was $1.41\;J/cm^2$ at a scan speed of 1 m/s.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.41-47
• /
• 2012

The LDS(Laser Direct Structuring) is one of the new direct writing methods to fabricate conductive patterns by energy beam. It uses thermoplastic polymers with an additive compound that serves as plating seed after the activation by laser. The advantages of LDS include the miniaturization of electrical components, design flexibility, and a reduced number of production steps. The purpose of this study is to investigate the fundamental mechanism for LDS and the characteristics of conductive patterns by laser parameters. These results were studied by SEM, EDX, and XPS analysis. We have used a 20W pulse-modulated fiber laser and copper electroless plating to fabricate conductive patterns on polymer. The result showed that electroless copper plating seed caused the laser cracking of additive compound. In particular, the additive compound contained in copper metal oxides atoms will be changed to copper metal elements. Also, the characteristics of conductive patterns were dependent on laser parameter, especially laser fluence.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.246-249
• /
• 2007

A triple-band antenna was developed and fabricated by LDS(Laser Direct Structuring) process. The effects of the plating rate and heat treatment condition were investigated and the gains of fabricated antennas were measured at various frequencies. The laser irradiated surface shows clearly that there are prominence and depression. It shows anchoring effect between a plating material and ablation surface. The plating rate was decreased when the plating material is exhausted in the solution. This solution needs to refreshed by the new aid solution. The copper plating thickness is decreased with the increase of heat treatment temperature in the same time but it does not change other condition. The gain of LDS antenna showed higher than the generally processed antenna. This result was related with practical use of the dimension and effective dielectric constant.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.34-34
• /
• 2018

레이저를 통한 플라스틱 일체형 회로형성 기술은 레이저 직접 성형 (Laser Direct Structuring, LDS) 기술과 도금기술을 이용하여 기판 표면에 전도성 회로 패턴을 형성하고 소자를 집적하여 부품을 제작하는 기술이다. 종래에는 PCB 기반의 평면기판을 기반으로 하여 제작된 소자와 부품이 전자제품의 주를 이루었으나, 최근 소자의 집적화와 제품 디자인의 유연화(flexible)로 굽힘(bendable) 형태의 스마트 시계와 같은 웨어러블(wearable) 전자 제품이 출시되었으며, 레이저를 통한 플라스틱 일체형 회로형성 기술은 미래 사회의 주를 이룰 웨어러블 형태의 제품의 상용화를 가능하게 할 뿐만 아니라 회로 집적이 가능하여 제품 혁신을 주도할 기술로 주목 받고 있다. 본 연구에서는 LDS 부품의 미세 회로 구현을 위한 공정 기술 개발에 있어서 고생산성 무전해 동도금액 및 부품 실장을 위한 표면처리 기술 개발에 대한 결과를 보고한다. 미세 회로 패터닝 기술의 상용화를 위해서는 도금액의 안정성뿐만 아니라 고속 공정기술이 필요하다, 현재 국내 무전해 동 도금의 석출 속도는 시간 당 $4{\sim}5{\mu}m$ 내외이기 때문에, 생산성을 향상시키기 위해서는 시간 당 $10{\mu}m$ 정도의 고속 무전해 동 도금 공정 개발 필요하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.115-116
• /
• 2009