• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.439-443
• /
• 2011

It was performed to test the combustive properties of low density polyethylene and ethylene vinyl acetate (LDPE-EVA) mixture by the addition of magnesium hydroxide. Flame retardant of natural magnesium hydroxide was added to the mixture of LDPE-EVA in 40 to 80 wt% concentration. The composite was compounded to prepare specimen for combustive analysis by cone calorimeter (ISO 5660-1). Comparing with virgin LDPE-EVA, the specimens including the magnesium hydroxide had lower combustive properties. It is supposed that the combustion-retardation properties in the composites improved due to the endothermic decomposition of magnesium hydroxide. The specimens with magnesium hydroxide showed both the lower peak heat release rate (PHRR) and lower effective heat of combustion (EHC) than those of virgin polymer. As the magnesium hydroxide content increases, time to ignition increased and the peak heat release rate decreased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.573-580
• /
• 2021

Paraffin wax is attracting many attentions for promising solid fuel of hybrid rocket because of its higher regression than other fuels. However, even with paraffin fuel combustion, unsteady low-frequency oscillation of combustion pressure is still observed. And, this is related to the formation of liquid layer and the entrainment of fuel droplets entering the axial combustion gas flow. This study investigates the effect of additional combustion of fuel droplets on the occurrence of low-frequency combustion instability. On the other hand, the formation of fuel droplets depends on Weber Number (the ratio of the inertial force to the surface tension of the liquid) and Reynolds Number of the oxidizer flow. Therefore, a laboratory-scale hybrid rocket was used to monitor the occurrence of combustion instability while changing We number. A series of combustion tests were conducted to control We number by changing the oxidizer flow rate or adding LDPE (low density polyethylene) to base fuel. In the results, it was confirmed that there is a critical We number above which the low-frequency combustion instability occurs.

• Clean Technology
• /
• v.8 no.2
• /
• pp.61-66
• /
• 2002

Recycling method of red mud, byproduct from the aluminium manufacturing process, and paper sludge was investigated in order for them to be utilized as the adsorbent for the removal of volatile organic components(VOCs). Either high density polyethylene(HDPE) or low density polyethylene(LDPE) was added to facilitate the manufacture of adsorbents. The utilization of HDPE in the adsorbents increased the adsorption capacity due to the good physical properties, such as, BET and true density, compared with LDPE. BET values of the manufactured adsorbents were much lower than the commercial activated carbon ($10^{-2}-10^{-3}$). It may be due to the fact that the time for decomposition of the paper sludge was not enough during the manufacturing of adsorbents. But the specific adsorption capacity of the manufactured adsorbents (mole adsorbed per unit surface area) had much higher value than the commercial activated carbon (10-100). Therefore, it is important that BET of manufactured adsorbents needs to be increased to obtain the same adsorption capacity as the commercial activated carbon.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.309-312
• /
• 2006

This study shows to blend ethylene vinyl acetate(EVA) and a flame retardant agent, $Mg(OH)_{2}$, and synergists, zinc borate for improving flame retardancy of low density polyethylene(LDPE). And it studied the property of flame retardancy of LDPE/EVA blend by the amount of addition through LOI and TGA, estimated the electrical characteristics such as volume resistivity and breakdown strength. The flame retardancy of LDPE/EVA blend was much improved in case of adding zinc borate with 6phr degree, and the electrical characteristics were more or less decreased depending on increasing the amount of addition. Zinc borate used for improving the flame retardancy of LDPE/EVA blend let the added amount of a flame retardant agent, $Mg(OH)_{2}$ limited, and the electrical characteristics decreased extremely by adding a good deal of $Mg(OH)_{2}$.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.85-93
• /
• 2016

Flower-like zinc oxide (FZnO) was successfully synthesized via a sonochemical process. The chemical structure, morphology, and antimicrobial properties of as- prepared FZnO were investigated. Additionally, pure LDPE and five different LDPE/FZnO composite films were prepared with different FZnO content by using a twin screw extruder. According to the FTIR and SEM analyses, there exists weak interfacial interaction between LDPE and FZnO. Compared with pure LDPE, the LDPE/FZnO composite films showed UV barrier and enhanced antimicrobial activity against Escherichia coli (E. coli) as a Gram-negative micro-organism and Staphylococcus aureus (S. aureus) as a Gram-positive micro-organism. To enhance the interfacial interaction and good dispersion of FZnO into the LDPE matrix, and resultantly to such as UV barrier and antimicrobial properties of LDPE/FZnO composite films as the packaging materials, further efforts are required.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1304-1309
• /
• 1999

The respiratory characteristics and quality attributes of mature green mume fruits as influenced by modified atmosphere packaging(MAP) conditions during storage at 25oC for 8 days were investigated. The quality attributes of mume fruits were evaluated in terms of fresh weight loss, physiological injury and yellowing. The packaging materials used for MAP were low density polyethylene(LDPE) films with various different thicknesses. Yellowing and fresh weight loss of mume fruits were noticeably reduced by the packaging treatments with LDPE A and B. The physiological injury of the fruits during storage was found to be more severe in LDPE C than others. For LDPE A and B, the oxygen and carbon dioxide contents within the packages of Mume fruits maintained at the levels of 2~3% and 7~8%, respectively. With respect to visual quality, MAP prolonged the shelf life of the fruits much longer compared with the unsealed control. From the experimental results, it is suggested that the LDPE films with the gas trans mission rates of about 2,100 O2 ml/m2.day.atm and 6,700 CO2 ml/m2.day.atm would be proper for MAP of mature green mume fruits during storage at ambient temperature.

• Clean Technology
• /
• v.27 no.2
• /
• pp.124-131
• /
• 2021

As declarations of carbon neutrality are spreading throughout the world, much research is being conducted on biodegradable polymers. In this study, nanocellulose, which comprises the largest amount of natural polymer currently available in the world, was proposed as a substitute for non-biodegradable polymers. We chose to modify the surface functional group of crystalline nanocellulose using glycidoxypropyl trimethoxysilane (GPTMS), which is a silane coupling agent, and the product was then used to form a film with low density polyethylene (LDPE). We then conducted measurements using a Fourier transform infrared spectrophotometer (FT-IR) in addition to measuring hydrophilic/lipophilicity of the surface functional group modification of crystalline nitrocellulose as well as that of a polymer composite using the hybrid nanocellulose (H-NC). For compatibility with petroleum-based polymers, the best tensile strength and transparency was found when the H-NC was reacted at pH 14 and 1 wt% compared with LDPE. From the test results, we found that it is possible to modify the surface functional groups of nanocellulose using a silane coupling agent. In addition, the high compatibility of nanocellulose with petroleum-based polymers is expected to help in reaching carbon neutrality by reducing the use of fossil fuels.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.34-38
• /
• 2002

In this paper, efficiency estimation of toxicity fee fire resistance cable experiments was measured smoke density of toxicity free fire resistance polyolefin insulation material and electric field dependence of tree shape in low density polyethylene (LDPE). One of the most serious causes of failure in high-voltage cables, can be an electrical discharge across an internal gab or void in the insulating material. Treeing due to partial discharge is one of the main causes of breakdown in the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation and research of the fire resistance character has become important. First, we have studied on electric field dependence of tree shape in LDPE about treeing phenomena occurring on the high electrical field. Second, the measurement method is the attenuation quantity of irradiation by smoke accumulating with in a closed chamber due to non-flaming heat decomposition and flaming combustion. A main cause of fire-growth and generating toxic gas when, it bums, should be dealt with great care in life. safety design. The fire gases were occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC, which has high content of carbon in chemical compound.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.1
• /
• pp.41-48
• /
• 2021

In this study, ethylene vinyl acetate (EVA) and low density polyethylene (LDPE) composite films (EVA/LDPE-OSP) containing calcined oyster shell powder (OSP) were prepared using twin-screw extruder as an antimicrobial packaging material. The OSP composite was initially prepared and then incorporated into an EVA/LDPE blend at different ratios (0, 1, 3 and 5%) to develop the EVA/LDPE-OSP composite films. The as-prepared EVA/LDPE-OSP composites films were evaluated using FT-IR, DSC, TGA, OTR, WVTR, SEM and UTM as well as antimicrobial activity was examined using JIS Z 2801:2000 standard. OPS endowed the antimicrobial potency to the composite films against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. In addition, the incorporation of OSP remarkably enhanced the thermal stability. OSP as a natural biocidal agent can be used as a multifunctional additive in packaging industry such as improving the thermomechanical properties and preventing the microbial contamination of packaged products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1767-1772
• /
• 2009

Brined Baechu cabbages were packed with different films of high density polyethylene (HDPE), aluminium polyethylene (Al/PE), nylon polyamide (Ny/PE), low density polyethylene (LDPE) and permeability-controlled polyethylene (Mirafresh (MF), US patent No. 5972815), and then stored at 4${^{\circ}C}$ for 4 weeks. Changes in quality characteristics of pH, acidity, total bacteria counts, lactic acid bacteria counts, E. coli counts, texture and $O_2$ concentration were determined during the storage. The pH of brined Baechu cabbage packed with Mirafresh (MF) film was 6.25 after 4 weeks from initial pH of 6.80. The acidity of all brined Baechu cabbages increased, however, the increase of the cabbage in MF was the lowest. The levels of total bacteria, lactic acid bacteria and E. coli in the cabbages packed with MF were also lower than the other films. After 4 weeks, of all brined springiness Baechu cabbages decreased, but MF showed relatively high springiness. The $O_2$ concentrations by its permeation through MF were 0.35%-1.00% at 4-25${^{\circ}C}$ after 1 week. In conclusion, MF was found to be the most effective packaging film for brined Baechu cabbage to extend shelf-life.