• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.133-134
• /
• 2011

본 논문에서는 소스코딩에 활용되고 있는 LDPCA 부호를 가변 부호율을 얻는 채널코딩 목적으로써의 사용 가능성을 타진한다. 컴퓨터 성능 실험의 결과로 가변 부호율과 어느 정도의 BER 성능을 확인하였지만, 체크노드 머징기법이 여타의 LDPC 부호에 비해 성능을 크게 떨어뜨리는 것으로 나타났다. 향후 체크노드 머징이 가능하면서도 좀 더 개선된 성능을 가지는 LDPCA 를 설계하는 일이 중요할 것으로 생각된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.744-749
• /
• 2013

We propose soft user data input on LDPC codes with parity encoded by the (1, 7) run length limited (RLL) code for perpendicular magnetic recording channel. The user data are encoded by maximum transition run (MTR) (3;11) code. In order to minimize the loss of code rate, the (1, 7) RLL code only encode the parity of LDPC. Also, to increase performance, we propose only user data part applied soft output Viterbi algorithm (SOVA). The performance using the SOVA showed good performance lower than 26 dB. In contrast, it showed worse performance high than 26 dB. This is because of incorrect soft information by high jitter noise and two different input types for LDPC decoder.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.11a
• /
• pp.81-84
• /
• 2008

최근 센서네트워크와 같은 에너지 제한 환경을 위한 경량화 부호화 기술의 필요성이 대두됨에 따라 분산 소스 부호화 기술(Distributed Source Coding)의 응용기술로 비디오 부호화 복잡도의 대부분을 차지하는 움직임 예측/보상과정을 부호화기가 아닌 복호화기에서 수행하는 분산 비디오 부호화 기술(Distributed Video Coding)에 대한 연구가 활발히 이루어져 왔다. 이에 가장 대표적인 기술인 Wyner-Ziv 코딩 기술은 채널 코드를 이용하여 원본 프레임과 이에 대한 복호화기의 예측영상인 보조정보 사이의 잡음을 제거하여 영상을 복원한다. 일반적으로 보조정보는 원본영상에 유사한 키 프레임간의 프레임 보간을 통하여 생성되며 채널 코드는 Shannon limit에 근접한 성능을 보이는 Turbo 코드나 LDPC 코드가 사용된다. 이와 같은 채널 코드의 복호화는 채널 잡음 모델에 기반하여 수행되어지며 Wyner-Ziv 코딩 기술에서는 이 채널 잡음 모델을 '상관 잡음 모델' (Correlation Noise Modeling)이라 하고 일반적으로 Laplacian이나 Gaussian으로 모델화 한다. 하지만 복호화기에는 원본 영상에 대한 정보가 없기 때문에 정확한 상관 잡음 모델을 알 수 없으며 잡음 모델에 대한 예측의 부정확성은 잡음 제거를 위한 패리티 비트의 증가를 야기해 부호화 기술의 압축 성능 저하를 가져온다. 이에 본 논문은 원본 프레임과 보조정보 사이의 잡음을 정확하게 예측하여 잡음을 정정할 수 있는 향상된 상관 잡음 모델을 제안한다. 제안 방법은 잘못된 잡음 예측에 의해 Laplacian 계수가 너무 커지는 것을 방지하면서 영상내의 잡음의 유무에 별다른 영향을 받지 않는 새로운 문턱값을 사용한다. 다양한 영상에 대한 제안 방법의 실험 결과는 평균적으로 약 0.35dB에 해당하는 율-왜곡 성능 향상을 보여주었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.50-57
• /
• 2006

Low-density parity-check (LDPC) codes are recently emerged due to its excellent performance. However, the parity check (H) matrices of the previous works are not adequate for hardware implementation of encoders or decoders. This paper proposes a hybrid parity check matrix which is efficient in hardware implementation of both decoders and encoders. The hybrid H-matrices are constructed so that both the semi-random technique and the partly parallel structure can be applied to design encoders and decoders. Using the proposed methods, the implementation of encoders can become practical while keeping the hardware complexity of the partly parallel decoder structures. An encoder and a decoder are designed using Verilog-HDL and compared with the previous results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.997-1005
• /
• 2008

In this paper, we proposed advanced T-DMB system which is based on Eureka-147 using UEP coding methods and hiererchical modulation for providing additional services while maintaining BER performance. We simulated the proposed advanced T-DMB system using unequal l6QAM modulation scheme combined with various bit split methods and coding methods such as double binary turbo code of DVB-RCS standard and LDPC code of DVB-S2 standard. In the simulation results, double binary turbo code and LDPC code of proposed advanced T-DMB system have coding gain of 2dB and 3.5dB compared to conventional T-DMB system respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.170-176
• /
• 2008

According to the development of Internet, DWDM system needs to improve the performance for long distance transmission international optical signals. For higher the transmission capacity, we have to raise the transmission speed and increase a number of channels. To make qualifications, there are a lot of technologies such as line coding, modulation, precious fiber, broadband amplification, dispersion and forward error correction. Especially, FEC has been considered as a progressive technology for long distance transmission to carry out high speed and large capacity traffic. This paper introduced the progress of each new generation of FEC and the way to employ by current system analyzed the coding gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.172-181
• /
• 2010

In this paper, we propose an adaptive block quantization method. The propose method perfrect reconstructs side information without high complexity in the encoder side, as transmitting motion vectors from a decoder to an encoder side. Also, at the encoder side, residual signals between reconstructed side information and original frame are adaptively quantized to minimize parity bits to be transmitted to the decoder. The proposed method can effectively allocate bits based on bit error rate of side information. Also, we can achieved bit-saving by transmission of parity bits based on the error correction ability of the LDPC channel decoder, because we can know bit error rate and positions of error bit in encoder side. Experimental results show that the proposed algorithm achieves bit-saving by around 66% and delay of feedback channel, compared with the convntional algorithm.

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.144-153
• /
• 2009

Recently, as the necessity of a light-weighted video encoding technique has been rising for applications such as UCC(User Created Contents) or Multiview Video, Distributed Video Coding(DVC) where a decoder, not an encoder, performs the motion estimation/compensation taking most of computational complexity has been vigorously investigated. Wyner-Ziv coding reconstructs an image by eliminating the noise on side information which is decoder-side prediction of original image using channel code. Generally the side information of Wyner-Ziv coding is generated by using frame interpolation between key frames. The channel code such as Turbo code or LDPC code which shows a performance close to the Shannon's limit is employed. The noise model of Wyner-Ziv coding for channel decoding is called Virtual Channel Noise and is generally modeled by Laplacian or Gaussian distribution. In this paper, we propose a Wyner-Ziv coding method based on the frequency-adaptive channel noise modeling in transform domain. The experimental results with various sequences prove that the proposed method makes the channel noise model more accurate compared to the conventional scheme, resulting in improvement of the rate-distortion performance by up to 0.52dB.