• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 추계총회 및 연구발표회 초록집
• /
• pp.94.2-94.2
• /
• 2004

• 한국전산유체공학회지
• /
• 제8권2호
• /
• pp.33-41
• /
• 2003

A simplified simulation model is designed to investigate the vacuum-driven bonding of glass panels in the cell process for LCD manufacturing. The bonding process is modelled by the transient flow of a weakly-compressible fluid in a very thin channel between two horizontal glass panels. An order of magnitude scaling analysis is conducted based on the characteristic feature of the channel of which height is much smaller than the horizontal length scales. It is revealed that the flow in the channel is represented by a Poiseuille flow of a compressible fluid. A finite volume model has been constructed to acquire the numerical solution to the derived simplified equations. For a simple test problem of pressure-driven microchannel flow, an assessment is made of the accuracy and validity of the proposed model. The basic aspects of vacuum-driven bonding are examined numerically, and the applicability of the present simulation model is illustrated.

• 한국콘텐츠학회논문지
• /
• 제6권12호
• /
• pp.163-168
• /
• 2006

LCD의 배면광원으로 활용될 무수은 형광램프를 제작한 다음, 전기 광학적 특성을 평가하였다. PDP 형광체, nitro-cellulose 및 n-butyl acetate를 혼합하여 유리관 내부에 얼룩 없이 균일하게 코팅하였다. 또 $550^{\circ}C$에서 20 분 동안 소성하였고, 가스혼합장치를 이용하여 $10^{-6}$ torr까지 배기시킨 다음 방전가스를 주입하여 형광램프를 완성시켰다. 형광체 두께 및 유리관 직경 등을 변화시켜 제작, 평가한 결과 이들 변수들에 대하여 최적의 값을 찾아 낼 수 있었다. 또한 Ne+Xe 방전가스를 주입하여 제작된 형광램프에 75 kHz의 정현파 전압을 공급시킨 결과 휘도 $6,270cd/m^2$, 발광효율 13 lm/W를 얻었다.

• 자원리싸이클링
• /
• 제24권1호
• /
• pp.58-65
• /
• 2015

국내 디스플레이 산업의 핵심기술과 글로벌 점유율은 세계 최고 수준이지만 폐 디스플레이의 재활용 관련한 전반적 기술은 매우 미흡하고 폐 디스플레이의 유리소재는 전량 매립하고 있는 실정이다. 본 논문에서는 폐 초박막 액정표시장치(Thin Film Transistor Liquid Crystal Display) 유리를 고강도 콘크리트 파일 및 발포체의 원료로 재활용 하는 연구, 초박막 액정표시장치 제조 공정에서 발생하는 불량품인 파유리를 장섬유 및 단섬유 등으로 재활용 하는 연구 동향에 대하여 조사하였다. 폐유리를 재활용한 원료 성분은 고강도 콘크리트 파일과 발포체 원료로 재료 재활용이 가능한 것으로 입증되었으며 특히 콘크리트 파일의 경우 기존 제품보다 향상된 특성을 나타내었다. 이외에도 파유리를 장섬유나 단섬유로 재활용 하는 기술은 이미 상용화 단계에 있으므로 향후 폐 디스플레이 유리 소재의 상용화 재활용 시스템을 구축할 수 있는 기술을 확립하는 방향으로 연구를 진행할 필요가 있다.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.99-108
• /
• 2007

As the structure of a mobile phone becomes thin to catch up with a slim product trend, the reliability of a LCD module is on the rise as a big issue for a product design. A drop test is the most basic and important verification method for a mechanical quality control but it requires much time and cost during a product development process. Thus many manufacturers have considered design guide lines using CAE and simulation for more effective usage of limited resources on the market. In this paper, the Maximum Principle Stress of a LCD glass panel is calculated on the basis of explicit FE Analyses method and input conditions are determined according to the general test standard. The design guideline for reliability improvements are suggested on the basis of the results of FE Analysis.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.325-342
• /
• 2014

The use of lightweight aggregate (LWA) instead of ordinary aggregate may make lightweight aggregate concrete, which possesses many advantages such as lightweight, lower thermal conductivity, and better fire and seismic resistance. Recently the developments of LWA have been focused on using industrial wastes as raw materials to reduce the use of limited natural resources. In view of this, the intent of this study was to apply Taguchi optimization technique in determining process condition for producing synthetic LWA by incorporating waste thin film transition liquid crystal displays (TFT-LCD) glass powder with reservoir sediments. In the study the waste TFT-LCD glass cullet was used as an additive. It was incorporated with reservoir sediments to produce LWA. Taguchi method with an orthogonal array L16(45) and five controllable 4-level factors (i.e., cullet content, preheat temperature, preheat time, sintering temperature, and sintering time) was adopted. Then, in order to optimize the selected parameters, the analysis of variance method was used to explore the effects of the experimental factors on the performances (particle density, water absorption, bloating ratio, and loss of ignition) of the produced LWA. The results showed that it is possible to produce high performance LWA by incorporating waste TFT-LCD glass cullet with reservoir sediments. Moreover, Taguchi method is a promising approach for optimizing process condition of synthetic LWA using recycled glass cullet and reservoir sediments and it significantly reduces the number of tests.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.467-475
• /
• 2017

The purpose of this study is to establish a prediction model for the electrical resistivity ($E_r$) of self-consolidating concrete by using waste LCD (liquid crystal display) glass as part of the fine aggregate and then, to analyze the results obtained from a series of laboratory tests. A hyperbolic function is used to perform nonlinear multivariate regression analysis of the electrical resistivity prediction model, with parameters such as water-binder ratio (w/b), curing age (t) and waste glass content (G). Furthermore, the relationship of compressive strength and electrical resistivity of waste LCD glass concrete is also found by a logarithm function, while compressive strength is evaluated by the electrical resistivity of non-destructive testing (NDT). According to relative regression analysis, the electrical resistivity and compressive strength prediction models are developed, and the results show that a good agreement is obtained using the proposed prediction models. From the comparison between the predicted analysis values and test results, the MAPE value of electrical resistivity is 17.0-18.2% and less than 20%, the MAPE value of compressive strength evaluated by $E_r$ is 5.9-10.6% and nearly less than 10%. Therefore, the prediction models established in this study have good predictive ability for electrical resistivity and compressive strength of waste LCD glass concrete. However, further study is needed in regard to applying the proposed prediction models to other ranges of mixture parameters.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (D)
• /
• pp.264-267
• /
• 2008

본 논문에서는 TFT-LCD 생산 라인에서의 시스템 통합에 필요한 데이터 프레임 포맷 표준화 방안을 연구하였다. 이를 위해 TFT-LCD 생산 라인을 구축 하는데 있어서 Glass 반송 작업에 필요한 데이터 프레임 구조 및 32개의 Word로 구성된 데이터 필드를 정의하였다. 시스템 통합에 필요한 표준화된 Glass 데이터 프레임 포맷을 사용함에 따라, 각 장비 제조사의 시스템 설계 기간 단축, 비용 절감, 셋업 기간 단축 등의 효과를 기대할 수 있다고 본다.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.76-81
• /
• 2000

Analysis on failure of the panel glass under mechanical shock is the main topic of this study. Since the glass for the LCD panel is thin, it needs to be designed to have enough toughness against mechanical shock. In this paper, a process of estimating fracture of the panel glass is proposed to guarantee reliability of the product. The fracture toughness of the panel glass is used as a criterion of the fracture based on an experimental approach. The stress intensity factor was calculated considering a model with the largest initial crack size on a cut surface and with the boundary force obtained from a dynamic finite element analysis. Critical surface roughness on the cut surface of a typical glass panel, to prevent fracture in case of bending mode, is obtained.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.27-31
• /
• 2006

Non-contact transportation system using air cushion for the manufacturing of large-sized LCD panels was considered. Flow characteristics between air pad and glass plate was analyzed using computational fluid dynamics method to obtain optimized air pad configurations. Effects of the design variables such as hole arrays from which gas is injected, gas-feeding method into the gas supplying channels, and horizontal and vertical pitches of clusters of holes were studied. Optimized air pad unit gave evenly distributed pressure contour on the glass surface and well-suspended levitation height in the experiment.