• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1767-1770
• /
• 2007

The key development issues in the flexible displays are TFT backplane technology for their various applications, which requires competitive device performance as well as its low temperature process. In this paper, with shortly reviewing recent flexible display development status, we describe technical trends of low-temperature a-Si TFTs. Our TFTs show good device characteristics enough to apply LCD and electrophoretic display.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.64-66
• /
• 2005

In this paper, some automatic inspection algorithms for LCD module are suggested. Human eyes are very good for the inspection in many industrial areas. However, very bright LCD back lighting may cause permanent damage to the human eyes. Also, the growing size of the LCD make it more difficult for the human inspectors. Therefore, using camera set, automatic inspection process becomes very essential for the future LCD industry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.450-455
• /
• 2007

LCD color filters have been manufactured in a process called photolithography to date, but various printing methods have been studied currently in response to the trend of low-end LCD panels. Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the systematic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented. Subsequently, this thesis attempts to find out the dispersive characteristics as well as the selection of pigments, monomers and dispersants in the part of millbase among the stages of manufacturing LCD color filters using the direct printing methods. The dispersive characteristics were shown through analytic devices such as PSA, Rheometer, etc.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.15-18
• /
• 2007

In this paper, we investigated the SLS process to control grain boundary(GB) location in TFT channel region, and it has been found to be applicable for locating the GB at the same location in the channel region of each TFT. We fabricated TFT by applying a new alignment SLS process and compared the TFT characteristics with a normal SLS method and the grain boundary location controlled SLS method. Also, we have analysed degradation phenomena under hot carrier stress conditions for n-type LDD MOSFETs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.16-19
• /
• 2007

In this paper, we present work that has been carried out using the SLS process to control grain boundary(GB) location in TFT channel region and it is possible to locate the GB at the same location in the channel region of each TFT. We fabricated TFT by applying a new alignment SLS process and compared the TFT characteristics with a normal SLS method and the grain boundary location controlled SLS method. Also, we have analyzed degradation phenomena under hot carrier stress conditions for n-type LDD MOSFETs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.977-982
• /
• 2007

The realization of the photoresist(PR) removal method with vaporized water and ozone gas mixture has been studied for the LCD TFT array manufacturing. The developed PR stripper uses the water boundary layer control method based on the high concentration ozone production technology. We develop the prototype of PR stripper and experiment to find the optimal process parameter condition like as the ozone gas flow/concentration, process reaction time and thin boundary layer formation. As a results, we realize the LCD PR strip rate over the 0.4 ${\mu}m/min$ and this PR removal rate is more than 5 times higher than the conventional immersion type ozonized water process.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.65-73
• /
• 2008

The characterization process for the accurate color reproduction in mobile phone with camera and LCD is popular. The camera and LCD characterization, gamut mapping process is necessary to map the camera's input color stimulus, CIEXYZ value, into the LCD's output color stimulus. Each characterization is the process estimating the relation between input and output signals. In case of LCD, because of output device, the output color stimulus for the arbitrary input signal can be measured by spectro-radiometer However, in the camera, as the input device, the characterization is an inaccurate and needs the manual works in the process obtaining the output signal because the input signal can not be generated. Moreover, after gamut mapping process, the noise is increased because the optimized gamma tone curve of camera for the noise is distorted by the characterization. Thus, this paper proposed the system of obtaining the output signal of camera and the method of gamma correction for the noise. The camera's output signal is obtained by RGB values of patches from captured the color chart image. However, besides the illumination, the error for the location of the chart in the viewfinder is generated when many camera modules are captured the chart. The method of correcting the position to correct the error from manual works. The position of camera is estimated by captured image. This process and moving of camera is accomplished repeatedly, and the optimized position can be obtained. Moreover, the lightness curve of camera output is corrected partly to reduce the noise from the characterization process.

• Korean Management Science Review
• /
• v.29 no.1
• /
• pp.33-56
• /
• 2012

Domestic LCD TV market is composed of two groups of products produced by major firms and small and medium enterprises. The major companies make the price relatively high, but the other makes lower in the same sizes. The model of the low price products does not make consumers choice when they choose LCD TV. This makes the questions of capability between difference price products. The reason above mentioned, the firms that include group of comparatively lower price, are worried about not increasing sale because of prejudice. This study is to find any interrelationship and evaluate the efficiency between the products using performance, exterior and brand power of product. In order to do this, a hybrid AHP/DEA evaluation model for comparison/valuation of LCD TV products is developed. The proposed process is; first, to derive hierarchy structure of LCD TV evaluation criteria using axiomatic design, second, to calculate the score of each LCD TV product through AHP analysis including weight calculation of evaluation criteria, and last, to evaluate the efficiency of LCD TV product by applying DEA by defining product scores as output and prices as input. It concludes that the high price products shows good efficiency, but there are some products with good exterior and brand power, not performance, also presenting good efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.115-117
• /
• 2002

In order to realize a stable rubbing process for the liquid crystal panel, the authors investigated the quantitative evaluation method of rubbing process uniformity. The proposed method focuses on the relationship between the image quality of the LCD panel for gray scale images and the rubbing uniformity. The proposed method indicates rubbing uniformity using quantitative parameters of spots and hairlines on the LCD panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.841-844
• /
• 2007

In this paper, a vertical block mura, which massively occurred in the LCD products, was investigated extensively by various methods, source drain (SD) line shift is found out to be one of the key reasons. This work to some extent, establishes theoretic hypothesis for further research and solutions similar issues.