• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.291-300
• /
• 1999

The Snyder's synthetic unit hydrograph method is selected to apply the concept of the fractal dimension by stream order for the practicable rainfall-runoff generation, and fourth types of the Snyder's relation are derived from topographic and observed unit hydrograph data of twenty-nine basins. As a result of the analysis of twenty-nine basins and the verification of two basins, the Snyder's relation which considers the fractal dimension of the stream length and uses calculated unit hydrograph data shows the best result. The concept of the fractal dimension by stream order is applied to the Snyder's synthetic unit hydrograph method. The topographic factors, used in the Snyder's synthetic unit hydrograph method, which have a property of the stream length like $L_{ma}$ (mainstream length) and $L_{ca}$ (length along the mainstream to a point nearest the watershed centroid) were considered. In order to simplify the fractal property of stream length, it is supposed that $L_{ma}$ has not the fractal dimension and the stream length between $L_{ma}$ and ($L_{ma}\;-\;L_{ca}$) has the fractal dimension of 1.027. From the utilization of this supposition, a new Snyder's relation which consider the fractal dimension of the stream length occurred by the map scale used was finally suggested.

• Clean Technology
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2010

The feasibility of clean technology to minimize the $CO_2$ emission by recycling and reuse the waste materials and energy have been studied for the cement industry. A life cycle assessment (LCA) was performed for an alternative raw material-supply method to use the molted slag as the major raw material in the cement clinker manufacturing. Using this new method, a 60% of $CO_2$ could be reduced that comes out during the decarboxylation from the cement rotary kiln. The energy-efficiency improvement and the alternative energy methods that had been determined in our previous study through the environmental assessment of cement industry were applied to the study for the reduction of $CO_2$ emission. The natural gas, one of the fossil fuels, was also used as the first choice to get the result at the earliest time by the most economic and the most efficient green technology and to switch into the carbon neutral energy consumption pattern.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.19-27
• /
• 2023

The interest in greenhouse gases (GHG) emitted from all industries is emerging as a very important issue worldwide. This is affecting not only the global warming, but also the environmentally friendly competitiveness of the industry. The fisheries sector is increasingly interested in greenhouse gas emissions also due to the Paris Climate Agreement in 2015. Korean industry and government are also making a number of effort to reduce greenhouse gas emissions so far, but the effort to reduce GHG in the fishery sector is insufficient compared to other fields. Especially, the investigation on the GHG emissions from Korean fisheries did not carry out extensively. The studies on GHG emissions from Korean fishery are most likely dealt with the GHG emissions by fishery classification so far. However, the forthcoming research related to GHG emissions from fisheries is needed to evaluate the GHG emission level by species to prepare the adoption of Environmental labels and declarations (ISO 14020). The purpose of this research is to investigate which degree of GHG emitted to produce the species (swimming crab and snow crab) from various fisheries. Here, we calculated the GHG emission to produce the species from the fisheries using the life cycle assessment (LCA) method. The system boundary and input parameters for each process level are defined for LCA analysis. The fuel use coefficients of the fisheries for the species are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for producing the unit weight species and annual production are calculated by fishery classification. The results will be helpful to establish the carbon footprint of seafood in Korea.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2961-2964
• /
• 2011

Greenhouse gas and energy reduction goal management system is announced to reduce national CO2 emission in 2011. The target business sector of the system has to follow the procedure of the system and get the assessment. The percentage of the national CO2 reduction goad is 30 % compared to the amounts of BAU. In railway business sector, 6 bodies are included in this system so that railway industry cannot stay and sustain its better position any more than other transportation industry. Most of the industry except Railway industry is struggling to develop its product more environmentally friendly and get the 3rd party certification like Eco-labelling and Carbon footprint. To get environmental certification, LCA method has to be applied because life cycle approach is needed to respond current environmental requirement. The purpose of this project is to facilitate railway vehicle manufacturer obtaining the environmental certification termed Korea EPD. By doing so, the environmental performance evaluation tool would be developed and modelled within the LCA framework and therefore applied especially for rail vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.84-91
• /
• 1985

This paper proposes the theory for the Low Cost Automation (LCA) as a intermediate process of the factory automation, where the SCA is new adaptation for the improving productivity without changing the current product lines. And also this paper deals with the case study for the predictable effects and technical method at the extruding cable lines. As the results, the implementation of the LCA theory could be acomplished saving materials and man power, improving reliability and productivity. For this facilities, it cost within 5% extra expense of a extruding cable line systems. And it could be refund in six months.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.809-818
• /
• 2005

Comprehensive environmental impact of wastewater treatment plant (WWTP) was evaluated with life cycle assessment (LCA) methodology based on ISO 14040. As environmental impact assessment method, Eco-indicator 95 and Eco-indicator 99 were used. The studied WWTP had a capacity of $100,000m^3/d$, and its life span of civil structure and main machinery was designed to 40 years and 20 years, respectively. As the results, more than 95% of environmental impact was produced by using electricity and chemical use in operation stage. In construction stage, temporary shoring facility was the major reason of environmental load, however, its impact was much less than those by operation utilities.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.335-339
• /
• 2016

The purpose of this study is to analyze effects of greenhouse gas reduction in organic agriculture. To accomplish the objective of the study, a field survey was conducted. Based on the field survey results, LCA method was used to estimate the greenhouse gas emission. The farmer survey and LCA estimation data were provided by The Foundation of Agricultural Technology Commercialization and Transfer. The GHG estimation results showed that GHG emission of organic farming is less by 10.6~89.3% when compared with the conventional farming. In addition, the economic value of greenhouse gas reduction in organic farming amounts to 1,097 million won. Based on major findings, in response to national greenhouse gas reduction target, it is needed to expand organic farming, supporting organic farmers' income.

• Clean Technology
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2015

Utilized in a variety of electronic components, electronic components industry with metallic ink technology was established itself as a major technology research and development was gradually increasing, silver ink that is excellent in conductivity and stability, have long been used in the industry of electronic components in recent years and silver ink has been the size of nanoscale particles dispersed by developing display, an electronic tag, a flexible circuit board or the like used in the semiconductor and electronics as has been highlighted in, however industry modernization of equipment by increasing the production and consumption of products generated during the production process and environmental pollutants by use of waste products is expected to bring a serious environmental problem. In this study, prepared by a wet reduction method, the manufacturing process of the silver nano-ink to the entire process of the environmental impact assessment (LCA) was evaluated using the techniques. Life cycle assessment software GaBi 6 was used as received from the relevant agencies of the silver nano-ink data with reference to the manufacturing process, building inventory was international organization for standardization (ISO) 14040, 14044 compliant LCA conducted over four stages.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.464-471
• /
• 2013

In this study, the resource efficiency and future metal resource requirement in photovoltaic (PV) production system were evaluated by using material balance data and life cycle assesment (LCA) method. As a result, in the resource efficiency of ferrous and non-ferrous metal, lead and tin had higher resource efficiency than other materials in all PV systems (SC-Si, MC-Si, CI(G)S, CdTe). In the resource efficiency of rare metals, gallium and rhenium in silicon system and rhenium and rhodium in thin-film system ranked as the first and second high resource efficiency. In case of rare earth metal, gadolinium and samarium took higher resource efficiency. The results of the future metal resource requirement in PV systems showed that 2,545,670 ton of aluminium, 92,069 ton of zinc, 22,044 ton of copper, 1,695 ton of tin and 31 ton of nickel will be needed by 2030 in South Korea, except resource recycling supplement.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.925-930
• /
• 1998

EPMA and XPS on $Bi_2Sr_2-\chi_LCa_1+\chi_LCu_2O_{8+d}$($\chi_L$ = 0.01, 0.2, 0.3, 0.4, 0.5, 0.6) films by LPE method were performed in order to investigate Sr and Ca distributions in SrO- and Ca-layers. It is found that $T_C^{zero}$ carrier concentration and lattice parameter c monotonically decreases with increasing $\chi_L$. Sr and Ca contents in Ca-layer change in proportion to that in melt. On the other hand, in SrO-layer, Ca content strongly depends on Sr content in that layer and not on Ca content in melt. Since deficiency in SrO-layer increases and $T_C^{zero}$ creases with $\chi_L$,t is found that the deficiencies of Sr and Ca atoms in the SrO-layer has a influence on reducing $T_C^{zero}$.