• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.563-569
• /
• 2002

This paper proposes an inverter for the grid-connected photovoltaic system based on the transformer-less inverter. This system consists of a high frequency DC-DC converter, high frequency transformer, diode bridge rectifiers, a DC filter, a low frequency inverter, and an AC filter. The 20kHz switched high frequency converter is used to generate bipolar PWM pulse, and the high frequency transformer transforms its voltage twice, which is subsequently rectified by diode bridge rectifiers for a full-wave rectified 60 Hz sine wave power output. Even though the high frequency link system needs more power semiconductors, a reduced size, light weight, and saved parts cost make this system more comparative than other power conditioning systems due to elimination of 60Hz transformer.

• Journal of the Korean Society for information Management
• /
• v.20 no.4 s.50
• /
• pp.91-111
• /
• 2003

This paper shows that digital libraries can be understood through STIN models which emphasize interactions among components in networks. The enrollment strategies in the American Memory make human and non-human factors interact. Specifically, this paper articulates that the relationships between users and collections, between users and staff, and between users and users are closely linked through the strategies . Observing the linkages among these components ,this paper found that the enrollment processes not only draw users to the American Memory, but also alter roles of components and creates new roles and players for them. The alterations of roles and the resulting changes of relationships among components mean that digital libraries lead to transform the grounding of knowledge works in a society.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.31-37
• /
• 2020

In this paper, we propose a novel sub-wavelength unit cell metamaterial absorber using multi-layer structure. The proposed absorber consists of 4 layers, and each layer has a spiral resonator connected by a via hole. This structure increases inductance of the unit cell, and therefore the resonant frequency can shift to lower frequency. We optimized the proposed absorber, and the electrical size of the unit cell is dramatically reduced to 0.013 times of the wavelength. The performance of the proposed absorber is demonstrated with full-wave simulation and measurement results. An absorption rate exceeding 97% is achieved at 1.74GHz. In addition, the proposed absorber attains a high absorption rate of 90% for different polarization and incident angles.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.443-450
• /
• 2016

The linearization technique for low noise amplifier (LNA) has been implemented in standard $0.18-{\mu}m$ BiCMOS process. The MOS-BJT derivative superposition (MBDS) technique exploits a parallel LC tank in the emitter of bipolar transistor to reduce the second-order non-linear coefficient ($g_{m2}$) which limits the enhancement of linearity performance. Two feedback capacitances are used in parallel with the base-collector and gate-drain capacitances to adjust the phase of third-order non-linear coefficients of bipolar and MOS transistors to improve the linearity characteristics. The MBDS technique is also employed cascode configuration to further reduce the second-order nonlinear coefficient. The proposed LNA exhibits gain of 9.3 dB and noise figure (NF) of 2.3 dB at 2 GHz. The excellent IIP3 of 20 dBm and low-power power consumption of 5.14 mW at the power supply of 1 V are achieved. The input return loss ($S_{11}$) and output return loss ($S_{22}$) are kept below - 10 dB and -15 dB, respectively. The reverse isolation ($S_{12}$) is better than -50 dB.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.479-490
• /
• 2015

The conventional phase-shifted full-bridge (PSFB) converter with an LC filter has been widely used for high-power applications of over 1.0 kW. However, the PSFB converter cannot obtain optimal power conversion efficiency during the battery charging in electric vehicle (EV) on-board battery charger applications because of its unique drawbacks, such as a large circulating current and very high voltage stress in the rectifier diodes. As a result, the converters with a capacitive filter, such as LLC resonant converters, replace the PSFB converter in the EV chargers. This study analyzes the problems of the PSFB converter for EV on-board charger applications in detail. Moreover, the newest converters based on the conventional PSFB converter are reviewed. On the basis of the reviews, new PSFB converter topologies are proposed for EV charger applications. The new topologies are formed by connecting the rectifier stage in the PSFB converter with the output of an LLC resonant converter in series. Many problems of the conventional PSFB converter for EV charger applications can be solved and the performance can be more improved because of this structure; this idea is confirmed by an experiment consisting of prototype battery chargers under the output voltage range of 250-450 Vdc at 3.3 kW.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.166-172
• /
• 1983

In this study the sillicon-alloyed isotropic pyrolytic carbon was deposited in the tumbling bed from the pyrolysis of propane and silicon tetrachloride and investigated whether the silicon-alloyed isotropic pyrolytic carbon deposited in this study was usable as bionaterial or not. The silicon-allyed isotropic pyrolytic carbon was varied by controlling the process variables such as propane con-concentration and the argon flow rate flowing in to the silicon tetrachloride bubbler at a fixed reaction bed tempera-ture of 120$0^{\circ}C$ a rotation of reaction tube of 40 rpm a bed particle weight of 7.5 g and a total flow rate of 21/min; the propane concentration was varied from 10 to 70 and the argon flow rate flowing into the silicon tetrachloride bubble from 0 to 1000 cc/min. The results show that the silicon-alloyed isotropic pyrolytic carbon was obtained at all conditions investigated, . And then the alloyed silicon content is rangion from 7 to 14.5 wt%. The density and deposition rate of deposited silicon-alloyed isotropic carbon increased axxording to silicon content and propane concentration. And the apparent crystal-size(Lc) of pyrolytic carbon is not changed with silicon content. The density and apparant crystallite size are respec-tively in the range of 1.94 to 2.06 and 20 to 25$\AA$ It is shown that the silicon-alloyed isotropic pyrolytic carbon ob-tained in this experiment is usable as biomaterial.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.813-821
• /
• 2017

This paper presents the study result on a realization of wireless umbilical device for missile systems. In general, a missile system is connected to a fire control equipment via an umbilical connector to get the electrical power for its internal equipment and communicate with each other. And these connectors inherently have many problems of mis-contact between pin and socket, and mis-separation during missile firing, etc. A wireless umbilical device using LC resonance is devised to solve these problems of the current technology. For hundreds of watts power transmission under the missile system environment of restricted space, we designed and made a prototype of wireless umbilical device. And we tested this wireless umbilical device with an aluminum cylinder having cutout windows which simulate missiles. We realized that the wireless technology can be used as a substitute for the conventional umbilical connectors, and EMI and environment tests should be followed further.

• Journal of Pharmacopuncture
• /
• v.20 no.4
• /
• pp.274-279
• /
• 2017

Objective: SanYangSam and SanYangSanSam are traditional Korea-medical herbs that are grown from Panax ginseng C.A. Meyer. In our previous studies, we found that the functional compounds in SanYangSam and SanYangSanSam were different and depended on the type and the cultivation environment of ginseng. This study aimed to profile the functional constituents in SanYangSam and SanYangSanSam. Methods: To profile the functional aspects of the many compounds that have therapeutic activities in SanYangSam and SanYangSanSam extracts, we used liquid chromatography tandem mass spectrometry and quadrupole orthogonal acceleration time-of-flight mass spectrometry. Results: A total of four major compounds were detected; two of which were the natural flavonoids kaempferol and quercetin. Among others, two polyacetylene compounds, including panaxydol and panaxynol, were detected. Conclusion: In this study, we found that panaxydol, one of the polyacetylene constituents of ginseng, is a candidate anti-cancer agent in SanYangSam and SanYangSanSam pharmacopuncture. In addition, we found that the panaxydol levels in the SanYangSanSam extract were over 30 times those in the SanYangSam extract.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.545-555
• /
• 2002

Ginsenosides of 20(S)-protopanaxadiol and 20(S)-protopanaxatriol classification including the aglycones, PD, PI and ginsenosides Rh2, Rhl were shown to posses characteristic effects on proliferation of THP-l human leukaemia cells. A similar result was not apparent for ginsenoside Rg3 or dexamathasone. The concentration to inhibit $50\%$ of cells $(LC_{50})$ for PD, Rh2, PI and Rhl were 13 ${\mu}g/mL,\;15{\mu}g/mL,\;19{\mu}g/mL\;and\;210\;{\mu}g/mL$ respectively. Cell cycle analysis showed apoptosis with PD and PI treatment of THP-1 cells resulting in a build up of sub-G1 cells after 24, 48 and 72 hours of treatment. Rh2, and dexamathasone treatments also increased apoptotic cells after 24 hours, where as Rhl did not. After 48 and 72 hours Rh2, Rhl and dexamathasone similarly increased apoptosis, but these effects were significantly (P<0.05) lower than observed for both PD and PI treatments. Furthermore, treatments that produced the largest build up of apoptotic cells were also found to have the largest release of lactate dehydrogenase (LDH). It can be concluded from these studies that the presence of sugars to PD and PI aglycone structure reduces the potency to induce apoptosis, and alternately alter membrane integrity. These cytotoxic effects to THP-l cells were different from dexamethasone.

• Korean Journal of Pharmacognosy
• /
• v.50 no.3
• /
• pp.198-204
• /
• 2019

A facile and convenient method was developed for the mass production of epigallocatechin gallate (EGCG) rich green tea extract (Er-GTE). The Er-GTE was successfully obtained from the crude water extract of green tea by the combination of two step purification, i.e., a simple adsorption process on the cation exchange resins (Trilite SCR-B) followed by the chromatography with Diaion HP-20 resins. The green tea extract produced by water extraction under $45^{\circ}C$ was subjected to adsorb on the strongly acidic cation exchange resin, Trilite SCR-B. The eluate passed through the resin was reabsorbed on Diaion HP-20 resin, which was subjected to elute with a mixture of water and alcohol by conventional chromatographical manner. The EGCG content in Er-GTE was estimated above 97% by HP-LC analysis and the newly developed method was regarded as the most suitable and appropriate process for the mass production of epigallocatechin gallate rich green tea extract (Er-GTE).