• Atmosphere
• /
• v.30 no.2
• /
• pp.183-193
• /
• 2020

In this study, Yeongdong cold air damming (YCAD) cases that occur in winters have been selected using automatic weather station data of the Yeongdong region of Korea. The vertical and horizontal scales of YCAD were analyzed using rawinsonde and numerical weather model. YCAD occurred in two typical synoptic patterns such that low pressure and trough systems crossing and passing over Korea (low crossing type: LC and low passing type: LP). When the Siberian high does not expand enough to the Korean peninsula, low pressure and trough systems are likely to move over Korea. Eventually this could lead to surface temperature (3.1℃) higher during YCAD than the average in the winter season (1.6℃). The surface temperature during YCAD, however, was decrease by 1.3℃. The cold air layer was elevated around 120 m~450 m for LP-type. For LC-type, the cold layer were found at less than approximately 400 m and over 1,000 m, which could be thought of combined phenomena with synoptic and local weather forcing. The cross-sectional analysis results indicate the accumulation of cold air on the east mountain slope. Additionally, the north or northeasterly winds turned to the northwesterly wind near the coast in all cases. The horizontal wind turning point of LC-type was farther from the top of the mountain (52.2 km~71.5 km) than that of LP-type (20.0 km~43.0 km).

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.609-621
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of three light-cured glass ionomer cements to blood contaminated bovine dentin. The materials used in this study were Fuji II LC, Dyract and Variglass VLC. The dentin conditioners were 10% polyacrylic acid, 10% maleic acid and 10% phosphoric acid. 180 lower anterior bovine teeth were selected in this study. The teeth were embedded in acrylic resin and were grounded with 320 to 600 grit silicon carbide paper to create a flat dentin surface. The teeth were divided into SIX groups. The experimental procedures in six groups were as follows; Group l(GF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment. Group 2(BGF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment and blood contamination. Group 3(MD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment. Group 4(BMD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment and blood contamination. Group 5(PV) : Samples bonded to dentin surface with Variglass VLC after 10% phosphoric acid treatment. Group 6(BPV) : Samples bonded-to dentin surface with Variglass VLC after 10% phosphoric acid treatment and blood contamination. Group 1,3 and 5 were classified into the control groups, while group 2,4 and 6 were classified into the experimental groups. Each group contained 30 samples. After 24 hours water storage at $37^{\circ}C$, all smples were subjected to a shear load to fracture at a cross head speed of 1.0 mm/min with Instron universal testing machine(No. 4467). Debonded surfaces were observed under Scanning Electron Microscope(Hitachi S-2300) at 20kvp. The data were evaluated statistically at the 95% confidence level with Student's t-test. The following results obtained; 1. Shear bond strengths were higher in the control groups(1,3,5 group) than in the experimental groups(2,4,6 group). 2. The shear bond strength of group 5(PV) was the highest in the control groups, and the group 5 was significantly higher than the group l(GF) on the shear bond strength. 3. The group 4(BMD) was the highest on the shear bond strength, and the group 2(BGF) was the lowest in the experimental groups. The group 4(BMD) and 6(BPV) showed a significant difference with the group 2 on the shear bond strength. 4. All the groups showed an adhesive-cohesive failure. except the group 2(BGF) showing adhesive failure.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.14-20
• /
• 2018

Perfluorinated compounds (PFCs) have recently been recognized as global environmental pollutants. This study was performed to develop an analytical method for determination of levels of PFCs in food by LC-MS/MS. One hundred and nine food products were divided into two groups based on their fat and protein contents (high and low), following which samples containing high fat and protein contents were pooled and subjected to pretreatment consisting of enzymatic degradation and hexane extraction. The limit of detection of 17 PFCs in the samples were in the range of 0.013-0.145 ng/g. The degrees of precision of detection for group 1 (samples with low fat and protein contents) and group 2 (samples with high fat and protein contents) were 0.8-21.1 and 1.7-28.2%, respectively, with an accuracy of 78.8-109.8% for group 1 and 80-114.5% for group 2. This study indicated that pretreatment of high fat and protein foods with enzymatic degradation and hexane extraction would improve the detection of PFCs in food.

• Journal of fish pathology
• /
• v.12 no.1
• /
• pp.32-41
• /
• 1999

Ozonization for rearing seawater in land-based culture system has recently been utilized for disinfection of pathogenic microorganisms and improvement of water quality. This study was conducted to examine the effects of total residual oxidants (TRO) in ozone-treated seawater on survival, blood parameters, osmolality and oxygen consumption, and gill tissue of the flounder. Paralichthys olivaceus. Experiments were carried out with the starved flounder of 12~19 cm in total length at $20^{\circ}C$. The 48-hr and 96-hr $LC_{50}$ for the flounder amounts to 26.4 ppb and 22.3 ppb, respectively. With increase of TRO concentration from 24 to 39 ppb, the values of hematocrit, hemoglobin concentration, red blood cell count and osmolality of the flounder with respect to exposure time were significantly elevated, however, the oxygen consumption rates decreased. In the case of the fish exposed to 13 ppb for 96 hrs, blood glucose increased with an elapse of exposure time, while survival rate was 100%. Death apparently resulted by massive destruction of gill lamellar epithelium, severe osmotic imbalance and the lack of oxygen uptake. The results of this experiment indicated that to protect aquaculture organisms, the ozone-treated seawater should not contain any residual oxidants, and that relatively long-term exposure to TRO of low concentration can impact on survival and physiological conditions of the flounder.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.71-81
• /
• 2023

An accurate and easy-to-use analytical method for determining isocycloseram and its metabolites (SYN549431 and SYN548569) residue is necessary in various food matrixes. Additionally, this method should satisfy domestic and international guidelines (Ministry of Food and Drug Safety and Codex Alimentarius Commission CAC/GL 40). Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) was used to determine the isocycloseram and its metabolites residue in foods. To determine the residue and its metabolites, a sample was extracted with 20 mL of 0.1% formic acid in acetonitrile, 4 g magnesium sulfate anhydrous and 1 g sodium chloride and centrifuged (4,700 G, 10 min, 4℃). To remove the interferences and moisture, d-SPE cartridge was performed before LC-MS/MS analysis with C₁₈ column. To verify the method, a total of five agricultural commodities (hulled rice, potato, soybean, mandarin, and red pepper) were used as a representative group. The matrix-matched calibration curves were confirmed with coefficients of determination (R²) ≥ 0.99 at a calibration range of 0.001-0.05 mg/kg. The limits of detection and quantification were 0.003 and 0.01 mg/kg, respectively. Mean average recoveries were 71.5-109.8% and precision was less than 10% for all five samples. In addition, inter-laboratory validation testing revealed that average recovery was 75.4-107.0% and the coefficient of variation (CV) was below 19.4%. The method is suitable for MFDS, CODEX, and EU guideline for residue analysis. Thus, this method can be useful for determining the residue in various food matrixes in routine analysis.

• Journal of Technologic Dentistry
• /
• v.45 no.2
• /
• pp.31-38
• /
• 2023

Purpose: This in vitro study aimed to compare the trueness of 3-unit fixed dental provisional prostheses (FDPs) fabricated by three different additive manufacturing and subtractive manufacturing procedures. Methods: A reference model with a maxillary left second premolar and the second molar prepped and the first molar missing was scanned for the fabrication of 3-unit FDPs. An anatomically shaped 3-unit FDP was designed on computer-aided design software. 10 FDPs were fabricated by subtractive (MI group) and additive manufacturing (stereolithography: SL group, digital light processing: DL group, liquid crystal displays: LC group) methods, respectively (N=40). All FDPs were scanned and exported to the standard triangulated language file. A three-dimensional analysis program measured the discrepancy of the internal, margin, and pontic base area. As for the comparison among manufacturing procedures, the Kruskal-Wallis test and the Mann-Whitney test with Bonferroni correction were evaluated statistically. Results: Regarding the internal area, the root mean square (RMS) value of the 3-unit FDPs was the lowest in the MI group (31.79±6.39 ㎛) and the highest in the SL group (69.34±29.88 ㎛; p=0.001). In the marginal area, those of the 3-unit FDPs were the lowest in the LC group (25.39±4.36 ㎛) and the highest in the SL group (48.94±18.98 ㎛; p=0.001). In the pontic base area, those of the 3-unit FDPs were the lowest in the LC group (8.72±2.74 ㎛) and the highest in the DL group (20.75±2.03 ㎛; p=0.001). Conclusion: A statistically significant difference was observed in the RMS mean values of all the groups. However, in comparison to the subtractive manufacturing method, all measurement areas of 3-unit FDPs fabricated by three different additive manufacturing methods are within a clinically acceptable range.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.2
• /
• pp.139-151
• /
• 2023

Sulfonylurea herbicides are widely used in agriculture because they have a long residual period and high selectivity. An analytical method was developed using QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) technique for simultaneous determination of sulfonylurea herbicide residues in agricultural products by liquid chromatography tandem mass spectrometry and for establishment MRL (Maximum Residue Limit) of those herbicides in Korea. Extraction was performed using acetonitrile containing 0.1% formic acid with MgSO₄ (anhydrous magnesium sulfate) and NaCl (sodium chloride) and the extract was cleaned up using MgSO₄ and C₁₈ (octadecyl). The matrix-matched calibration curves were composed of 7 concentration levels from 0.001 to 0.25 mg/kg and their coefficients of determination (R²) exceeded 0.99. The recoveries of three spiking levels (LOQ, 10LOQ, 50LOQ, n=5) were in the range of 71.7-114.9% with relative standard deviations of less than 20.0% for all the five agriculture products. All validation values met criteria of the European Union SANTE/11312/2021 guidelines and Food and Drug Safety Evaluation guidelines. Therefore, the proposed analytical method was accurate, effective, and sensitive for sulfonylurea herbicide residues determination in agricultural commodities.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.2
• /
• pp.31-40
• /
• 2024

This study was indicated that both potato leaves and stems contained certain amount of alkaloids compounds which digested in the rumen of Hanwoo steers. Three candidate plant byproducts such as potato, tomato, and eggplant were collected and dried for making feed additives. Among the candidate byproducts, potato extract was contained 2.05±0.27mg/g of α-chaconine and 0.60±0.08mg/g of α-solanine. These glycoalkaloids was potentially activated as functional compounds to skeletal muscle in beef cattle. However, tomato and eggplant byproducts were not detected any alkaloids compounds. After potato byproducts collected and dried for 24 hours, dry matter of potato byproduct were used as feeding study for evaluating active dose titrations. For evaluating dietary rate of rumen microbes, potato dry matter were treated with in situ hybridization for 72 hours using annulated Hanwoo steers. The glycoalkaloids contained potato dry matter were digested until 12 hours after treatment. Blood concentration of glycoalkaloids were not detected after 24 hours treatment of potato dry matter. These data indicated that potato byproduct were digested with rumen microbes for 24 hours after treatments.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.3
• /
• pp.262-276
• /
• 2018

Models to predict Leaf Wetness Duration (LWD) were evaluated using the observed meteorological and dew data at the 11 citrus orchards in Jeju, South Korea from 2016 to 2017. The sensitivity and the prediction accuracy were evaluated with four models (i.e., Number of Hours of Relative Humidity (NHRH), Classification And Regression Tree/Stepwise Linear Discriminant (CART/SLD), Penman-Monteith (PM), Deep-learning Neural Network (DNN)). The sensitivity of models was evaluated with rainfall and seasonal changes. When the data in rainy days were excluded from the whole data set, the LWD models had smaller average error (Root Mean Square Error (RMSE) about 1.5hours). The seasonal error of the DNN model had the similar magnitude (RMSE about 3 hours) among all seasons excluding winter. The other models had the greatest error in summer (RMSE about 9.6 hours) and the lowest error in winter (RMSE about 3.3 hours). These models were also evaluated by the statistical error analysis method and the regression analysis method of mean squared deviation. The DNN model had the best performance by statistical error whereas the CART/SLD model had the worst prediction accuracy. The Mean Square Deviation (MSD) is a method of analyzing the linearity of a model with three components: squared bias (SB), nonunity slope (NU), and lack of correlation (LC). Better model performance was determined by lower SB and LC and higher NU. The results of MSD analysis indicated that the DNN model would provide the best performance and followed by the PM, the NHRH and the CART/SLD in order. This result suggested that the machine learning model would be useful to improve the accuracy of agricultural information using meteorological data.

• The Korean Journal of Pharmacology
• /
• v.30 no.1
• /
• pp.29-37
• /
• 1994

Inhibition of the nociceptive Tail Flick Reflex (TFR) was observed with electrical stimulation of the locus coeruleus/subcoeruleus (LC/SC) in the male Sprague - Dawley rats under light anesthesia, and the involved neurotransmitter (s) were characterized. Electrical stimulation of LC/SC induced the analgesia with the stimulation threshold (intensity of the current, given for 100 usec and in 100 Hz frequency, which caused the TF latency longer than 6.5 sec) around 55 uA. Intrathecal administrations of ${\alpha}_2$ antagonist, yohimbine (30 ug) or opioid antagonist, naloxone (20 ug) increased the stimulation threshold by 147% and 123% respectively (from 55 uA to 135 uA,9 and from 54 uA to 123 uA;P0.01, n=5, each). The basal TF latency without stimulation (3.1 sec) was reduced by the antagonists (to 2.5 sec by yohimbine, p<0.05, n=5; to 2.6 sec by naloxone, p<0.1, n=5), vehicle only did not show any effect. Noradrenaline(NA) in the spinal cord superfusates measured with HPLC was increased by the LC/SC stimulation, from 4.18 ng/ml before to 7.74 ng/ml after stimulation (P<0.05, n=10). The result suggest that analgesia induced by LC/SC stimulation is mediated, at least in part, by the noradrenergic system in which ${\alpha}_2$ receptor is involved, as well as the opioid system.