• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.461-464
• /
• 1997

In this paper, the response characteristics for organic vapors has been studied using both itaconate copolymer and maleate copolymer, which have different hydrophilic group and same hydrophilic group. The conductivity of sensitive LB films was decreased in the range of 18 layers and maintained over 30 layers, which can describe the behaviors of urganic vapors such as penetration and surface absorption. It was thought that the organic vapors was penetrated into sensitive 13 films below 18 layer and the electrode was covered with sensitive LB film over 30 layers.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.595-598
• /
• 1999

Ultra-thin films of amphiphilic Squarylium dye were prepared on the hydrophilic glass substrate by Langumuir-Blodgett(LB) technique. From the measurement of the surface pressure-area($\pi$-A) isotherm at air-water interface, it was found that amphiphilic Squarylium dye can form the stable monolayers. Using the LB technique, the Z-type monolayer assembly can be obtained. The amphiphilic Squarylium dye LB films exhibit λ\ulcorner at 684nm. The absorption is significantly red-shifted from solution of amphiphilic Squarylium dye(637nm in chloroform), suggesting that the Squarylim chromophores form J-aggregate in the LB film.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.44-49
• /
• 2014

인지질(L-${\alpha}$-phosphatidylethanolamine, LAPE) 단분자층 LB막의 전기화학적 특성을 통하여 그 안정성을 순환전압전류법으로 조사하였다. LAPE 단분자층 LB막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적특성은 0.5 N, 1.0 N, 1.5 N 및 2.0 N $KClO_4$ 용액에서 3 전극 시스템으로 순환전압전류법에 의해 측정하였다. 측정범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50, 100, 150, 200 및 250 mV/s로 설정하였다. 그 결과 LAPE LB막은 순환전압전류곡선으로부터 산화전류로 인한 비가역공정으로 나타났다. LAPE LB막은 전해질농도가 0.01 N, 0.05 N. 0.10 N, 0.15 N 과 0.20 N $KClO_4$ 용액에서 확산계수(D)는 각각 195, 15.9, 5.75, 1.38 및 $0.754cm^2s^{-1}{\times}10^{-9}$을 얻었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.172-174
• /
• 1988

Studies and measurements of open circuit voltage in a metal/insulator/metal structure where metal are electrodes, when the insulator molecules have dipole moments all oriented parallel to each other have been reported here. The measured voltage has been shown to be directed related to the dipole moment of the molecules in the films. The insulator ultra thin films was deposited on them by the Langmuir-Blodgett technique to obtain the structure referred to as z type and Hetero structure of LB films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1293-1294
• /
• 2008

The Langmuir-Blodgett (LB) method has been one of the most suitable techniques for fabricating organic thin films with well-controlled structures, compositions and thickness at the molecular level. We investigated the surface activity of dendrimer films at air-water interface by ${\pi}$-A isotherm. Also, we attempted to fabricate a 1G(4,3)-chloride dendrimer LB films. And their surface morphologies were observed by atomic force microscopy (AFM).

• 한국응용과학기술학회지
• /
• 제7권1호
• /
• pp.77-80
• /
• 1990

Using $CdCl_2$ buffer solution as subphase for LB films deposition, it was achieved successively to fabricate the Y-type mixed LB films of (N-eicosyl pyridinium)-TCNQ(1:2) complex and arachidic acid. By measure of U.V spectra and capacitance, deposition status was confirmed. Electrical conductivity was measured on a perpendicular direction of the LB films and in consequence of calculated was average $2.5\;{\times}\;10^{-13}$ - $2\;{\times}\;10^{-14}$ S/cm.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.137-143
• /
• 1995

Octadecyltrimethylammonium-TCNQ(1:1) complex was synthesized by the reaction of LiTCNQ with octadecyltrimethylammonium bromide and the reaction product was identified with FT-IR and UV/Vis spectroscopies. In order to prepare the LB films, ${\pi}-A$ isotherm characteristics of octadecyltrimethylammonium-TCNQ(1:1) complex were investigated. The LB films of octadecyltrimethylammonium-TCNQ(1:1) complex were formed on various substrates and the formation of ultrathin films of octadecyltrimethylammonium-TCNQ(1:1) complex was confirmed by using FT-IR and UV-Vis spectroscopies.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.58-62
• /
• 2001

Since Metallo-Porphyrin (MP) is very interesting compound due to its unique electronic and redox properties and it is also chemically and thermally stable, MP has been studied for potential memory and switching devices. In this study, thin films of 5,10,15,20-Tetrakis-Octadecyloxymethylphenyl-Porphyrin-Zn(II) were prepared by the Langmuir-Blodgett (LB) method and characterized by using UV/vis absorption spectroscopy and cyclic voltammetry. It was found that the proper transfer surface pressure for film deposition was 25 mN/m and the limiting area per molecule was 135 ${\AA}^2$/molecule. The current-voltage (I-V) characteristics of these films were investigated. Further details on the electrical properties of Porphyrin-Zn(II) derivative films will be discussed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권7호
• /
• pp.503-507
• /
• 1999

Quartz crystal in contact with viscoelastic medium was described directly in terms of the electrical equivalent circuit of the system. Stearic acid was used as viscoelastic medium and deposited on the surface of quartz crystal using the Langmuir-Blodgett(LB) method. Impedance properties of quartz crystal coated with LB films which were investigated by using admittance diagram and $Ζ-\theta$ plot a method of impedance analysis. When stearic acid LB film was deposited on the surface of quartz crystal, resonant frequency of quartz crystal was changed about 100 Hz/layer. This result illustrates the ability of the sensor system to detect small amounts of special gas in air.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.473-480
• /
• 1994

The electron tunnel effect in polvimide LB films sandwiched between metal electrodes has been investigated in the present work by a study of both the elastic and inelastic tunneling components. By the results of elastic tunneling experiments in Au/Pl/Au tunneling junction, we can judge the height and thickness of tunnel barrier. The inelastic current in Inelastic Electron Tunneling Spectroscopy(IETS) is due to the interaction of the tunneling electron with the vibrational modes of the molecular species in the barrier. Measurements are done on Au/PI/Pb tunneling junctions. The spectra obtained are the second derivatives of the current-voltage characteristics of these junctions : specifically, d$^{2}$1/dV$^{2}$ as a function of voltage V. Because the energies measured by IETS can be directly compared to those measured by infrared and Raman spectroscopy, IR-RAS spectroscopy also measured for reference.