• Journal of the Korea Institute of Building Construction
• /
• v.13 no.6
• /
• pp.513-521
• /
• 2013

This study aimed to examine whether heat curing methods of concrete subjected to $-10^{\circ}C$ could be effective by varying the combination of heating cable and surface heat insulations. Three different concrete specimens incorporating 30% fly ash with 50% W/B were fabricated to simulate wall, column and slab members with dimensions of $1600{\times}800{\times}200$ mm for slab, $800{\times}600{\times}200$ mm for wall and $800{\times}800{\times}800$ mm for column. For heat curing combinations, Type-1 specimens applied PE film for slab, plywood for wall and column curing. Type-2 specimens applied double layer bubble sheet (2LB) and heating coil for slab, and 50 mm styrofoam for wall and column curing. Type-3 specimen applied 2LB for slab, electrical heating mat for wall and column inside heating enclosure. The test results revealed that the temperature of Type 1 specimen dropped below $0^{\circ}C$ beginning at 48 hours after placement due to its poor heat insulating capability. Type 2 and 3 specimens maintained a temperature of around $5{\sim}10^{\circ}C$ after placement due to favorable heat insulating and thermal resistance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.473-473
• /
• 2011

In recent years, organic thin film transistors OTFTs based on conductive-conjugated molecules have received significant attention. We report a fabrication of organic single crystal nanowires that made on Si substrates by liquid bridge-mediated nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the organic single crystal nanowire and the Si substrate. Pentacene is the most promising organic semiconductors. However pentacene has insolubility in organic solvents so pentacene OTFTs can be achieved with vacuum evaporation system. However 6, 13-bis (triisopropylsilylethynyl) (TIPS) pentacene has high solubility in organic solvent that reported by Anthony et al. Furthermore, the substituted rings in TIPS-pentacene interrupt the herringbone packing, which leads to cofacial ${\pi}-{\pi}$ stacking. The patterned TIPS-Pentacene single crystal nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrical properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.400-403
• /
• 2003

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials. the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultra small size. In this paper, detected displacement current using PBLG and PBDG, deposition and observed the electrical characteristics to each 1, 3, 5, 7, 9 layers by LB method. Maximum value of change ratio of displacement current by the detected speed and temperature appeared almost lineally, could confirm that it are in comparison relation each other speed temperature and displacement current. The structure of manufactured device is MIM. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1527-1529
• /
• 2001

The physicochemical properties of the LB films were by AFM. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 2, 10, 30[mN/m]. The stable images are probably due to a s interaction between the monolayer film and substrate. We are unable to obtain molecule res in images of the films but did see a marked co between images of the bare substrate and those the network structure film deposited ont Formation that prevent when gas phase stat liquid phase state measure but Could know o matter that molecules form equal and stable when molecules were not distributed evenly, accumulated in solid state only.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.8
• /
• pp.650-654
• /
• 1994

Stable polyion-complexed polymeric monolayers were prepared by spreading perfluoroalkyl monomaleate copolymers, $C_2F_8MA-VE_2$ and $C_2F_8MA-VE_3$, on a aqueous poly(allylamine) subphase. The monolayer properties have been studied by the surface pressure-area (${\pi}$-A) isotherms. The $C_2F_8MA-VE_3$ containing longer oligoethyleneglycol pendant showed more expanded monolayer phase than the $C_2F_8MA-VE_2$. The polyion-complexed monolayers were transferable on various substrates, and the resulting Langmuir-Blodgett (LB) films were characterized by FT-IR spectroscopy and scanning electron microscopy (SEM). Two-dimensional crosslinking to form a polymer network was achieved by amide formation through heat treatment under vacuum with concurrent removal of perfluoroalkyl tails. SEM observation of this film on a porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore size of 0.1 ${\mu}$m. The $C_2F_8MA-VE_3$ revealed better covering capability than the $C_2F_8MA-VE_2$. Immersion of this film in water or in benzene did not cause any change in its appearance and in Fl-IR spectra.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2001.11a
• /
• pp.143-160
• /
• 2001

최근 들어 무선인터넷 및 모바일 컴퓨팅 기술의 급속한 발전과 함께 향후 그 수요가 폭발적으로 증대될 것으로 예상되는 분야가 위치기반서비스(LBS, Location Based Service) 기술이다. 이동통시산업이 발달한 미국 및 유럽의 선진국에서는 지난 수년에 걸쳐 지속적으로 축적되어 온 정보기술을 통하여 현재 수많은 LBS 관련 기술개발이 활발히 진행되고 있다. 1999년 미국의 FCC(미연방통신위원회)는 무선 E119 규칙을 제정하였는데, 이 규칙은 LBS를 주목하게 한 결정적인 계기가 되었다. FCC는 미국내의 망 사업자들이 2001년 10월까지 이동전화 사용자가 응급 호출(911)을 하였을 때 67%는 100M 이내의 위치오차로, 95%는 300M 이내의 위치오차로 응급호출자의 위치정보를 제공해야 한다는 규정을 제정했다. 이때부터 각종 관련 회사들이 생겨나기 시작했으며, 사람들이 LBS에 관심을 가지기 시작하였다. 국내에서도 이동통신사업자 및 IMT-2000 사업자를 중심으로 LBS 도입을 적극 준비하고 있는 상황이다. 그러나 위치정보라는 것은 오래 전부터 사람들이 알고있던 사항이다. 이미 GPS라는 것을 이용하여 국방분야, 환경분야, 교통 및 물류 분야에서 많이 활용되고 있었기 때문이다. 그런데 왜 같은 위치정보를 활용하는 분야인데 LBS는 이토록 많은 관심을 불러일으키는가? 그것에 대한 답변은 바로 위치정보가 이동통신망과 연결되면서 대중적이고 일반적인 서비스가 가능해졌기 때문이다. 특히, LBS는 GIS가 정보통신 기술과 융합되면서 앞으로 추구해야 할 차세대 정보기술 분야라는 점에서 그 의미는 더 크다고 할 수 있다. 평균(平均) 0.322였다. 그리고 RaA를 모핵종(母核種)으로 가정(假定)했을 때 각핵종간(各核種間)의 방사평형비(放射平衡比)는 대개 $C_1>C_2>C_3$인 것으로 나타났다. 여기서 $C_1,\;C_2$ 및 $C_3$는 각각 RaA, RaB 및 RaC의 농도(濃度)를 나타낸다.0cm 깊이에서는 Pythium균(菌)과 Fusarium균(菌)을 제외(除外)하고 모두 14일간(日間)에 사멸(死滅)하였다. 6. 최고(最高)에 달(達)했다가 최저(最低)에 이르는 온도(溫度)의 반복적(反復的)인 파동(波動)이 있는 것에서 없는 것보다 단시간(短時間)에 사멸(死滅)하였다. 이상(以上)의 결과(結果)에서 볼 때 하기고온기(夏期高溫期)의 재배(栽培) 휴한기(休閑期)에 PVC film을 사용(使用)하여 하우스를 밀폐(密閉)하거나 턴널을 만들어서 태양열(太陽熱)을 이용(利用)한 토양소독(土壤消毒)의 가능성(可能性)이 충분(充分)히 있는 것으로 생각된다.종합적(綜合的)으로 볼 때, diazinon 과 decamethrin의 처리(處理)는 포장(圃場)에서 벼멸구의 산란력(産卵力)과 성충수명을 증대(增大)시키고, 식이활동(食餌活動)을 촉진(促進)함으로서 벼멸구의 resurgence를 유발(誘發)하고 아울러 수도체(水稻體)의 hopperbun을 가속화시킬 가능성(可能性)이 있음을 알 수 있었다.는 점차 약하여 졌으나 catalase, invertase는 그 활성도가 일단 숙성중기에 높아졌다가 낮아졌다.n 이 pH 4.2이고 temperature는 $60^{\circ}C$이었다. 그리고

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2010

Surface plasmon resonance (SPR) which is utilized in thin film refractometry-based sensors has been concerned on measurement of physical, chemical and biological quantities because of its high sensitivity and label-free feature. In this paper, an application of SPR to detection of alcohol content in wine and liquor was investigated. The result showed that SPR sensor had high potential to evaluate alcohol content. Nevertheless, food industry may need SPR sensor with higher sensitivity. Herein, we introduced a nano-technique into fabrication of SPR chip to enhance SPR sensitivity. Using Langmuir-Blodgett (LB) method, gold film with nano-structured surface was devised. In order to make a new SPR chip, firstly, a single layer of nano-scaled silica particles adhered to plain surface of gold film. Thereafter, gold was deposited on the template by an e-beam evaporator. Finally, the nano-structured surface with basin-like shape was obtained after removing the silica particles by sonication. In this study, two types of silica particles, or 130 nm and 300 nm, were used as template beads and sensitivity of the new SPR chip was tested with ethanol solution, respectively. Applying the new developed SPR sensor to a model food of alcoholic beverage, the sensitivity showed improvement of 95% over the conventional one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.103-106
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression. In this paper, We studied on the Bio thin film by Langmuir-Biodgett(LB) method. The Experiment method used displacement current, $\pi-A$ isotherm and BAM (Brewster Angle Microscopy). using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1980-1982
• /
• 1999

Conductive Langmuir-Blodgett(LB) films have recently attracted much interest from the viewpoint of ultrathin film conductors at the molecular level. The result shows that the Maxwell-displacement-current (MDC) measuring technique is useful in the detection of phase-transitions over the entire range of molecule areas. In this parer, electrical properties of PBDG Langmuir(L) films were investigated using a displacement current measuring technique with pressure stimulation. Displacement current was generated When the Spread volume $150{\mu}{\ell}$ and compression velocity was about 30, 40, 50 mm/min. In the result, it is known that current is generated of higher current peek as compression velocity become faster.

• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.81-87
• /
• 1995

A novel biomaterial capable of incorporating biotinylated biomolecule has been synthesized. Our strategy is to biotinylate one-dimensional electroactive polymers and use a bridging streptavidin protein on Langmuir-Blodgett (LB) organized films. These copolymers are derivatized with long alkyl chains and biotin moieties to bind, respectively, to the hydrophobic surface and the biotinylated species, through the biotin and streptavidin complexation. We utilize the polymer assembly approach to attach a signal transducing biomolecule biotinylated phycoerythrin (B-PE) into this novel biomaterial by binding the unoccupied biotin binding sites on the bound streptavidin (4 sites total). The pressure-area isotherm of the protein injected monolayer showed area expansion. A characteristic fluorescent emission peak at 576nm was detected from the monolayer transferred onto a solid substrate. These observations demonstrated the promise of the organized thin polymer assemblies for their application to the sensor system.