• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2003

We report a switchable RGB color filters for Lab on a chip. Ink color filter devices are fabricated by PDMS patterning process. The optical transmission in the ultra-violet and visible wavelengths of color filters have been investigated. The ink color filters are characterised by the slope and shape of the spectrum. The transmission of red/yellow filter consists of curves with a sharp cut-off spectrum at 600 and 500 nm. The blue output of the ink filter has 80% peak transmission and weak red-leak, while the green ink filter has 48% peak transmission and red-leak.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.129-130
• /
• 2000

The emission color stability of poly(fluorene) derivatives upon thermal annealing or passage of current in an electroluminescent device is affected by the structure of the main chain polymer unit and particularly by the polymer chain end substituents. Proper attention to these features leads to colorfast blue emission in both photo- and electoluminescence. Furthermore, the spectral emission characteristics can be tuned by the incorporation of various comonomers. Preliminary single layer device studies validate the potential utility of poly(fluorene) homo and copolymers for OLED applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.794-797
• /
• 2007

We have developed the adaptive contrast ratio enhancement algorithm for mobile LCD. This algorithm aims at effective contrast ratio enhancement with minimizing degeneration of color and white balance. It also is very simple to fit mobile LCD system.

• Journal of dental hygiene science
• /
• v.12 no.2
• /
• pp.123-129
• /
• 2012

The aim of study was to compare the color parameters and mean color difference of porcelain specimens by different veneering technique in order to examine the effect of veneering technique on esthetics of yttria-stabilized tetragonal zirconia polycrystalline(Y-TZP) all ceramic restoration. Three groups of square-shaped core ceramic specimens(14mm in diameter and 0.3, 0.5, 0.7 mm) and two groups of veneering ceramic specimen were prepared for analysis. Color parameter($L^*,a^*,b^*$) and color difference of zirconia core squares and core-veneer specimens were measured with ShadeEye $NCC^{(R)}$ spectrophotometer, respectively. Mean color difference(${\Delta}E^*$)were calculated using color difference formula. Two-way analysis of variance(ANOVA) combined with a Tukey multiple-range test were used to analysis the data(${\alpha}=0.05$). ${\Delta}E^*$ values were not significantly affected by core thickness and veneering porcelain(p=0.083). The color differences(${\Delta}E^*$) of core-veneer specimens with 0.5, 0.7 mm-A1,A2,A3.5 shade were mostly below 3.7 which was within the clinically acceptable range, while color differences between 0.3 mm-A1,A2 showed more than 3.7. All-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.2
• /
• pp.9-15
• /
• 2012

In this paper, we propose a method to segment a color image into several meaningful regions. We suppose that the meaningful region has a set of colors with high frequency in the color image. To find these colors, the color image is represented as several sets of color points in RGB space. And when we use the density of points defined in this method, color belonging to a dense region of color points in RGB space refers to the color that appeared frequently in the image. Eventually, we can find meaningful regions by looking for regions with high density of color points using our level set function in RGB space. However, if a meaningful region does not have a contiguous region of the sufficient size in the image, this is not a meaningful region but meaningless region. Thus, the pixels in the meaningless region are assigned to the biggest meaningful region belonging to its neighboring pixels in the color image. Our method divides the color image into meaningful regions by applying the density of color points to level set function in RGB space. This is different from the existing level set method that is defined only in 2D image.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.199-207
• /
• 2009

The objective of this study was to evaluate the effect of color measuring instrument by measuring the color of dental composite resins. Nine shade light cured composite resin disks were prepared (diameter : 15 mm, thickness : 4 mm). CIE $L^*a^*b^*$ color scale of each disk was measured with 3 different types of spectrophotometer [MiniScan XE plus (Model 4000S, Hunter Lab, USA), CM-3500d (Minolta, Japan) and Specbos 2100 Miniature VIS Reflection spectrometer (Serial No: 319416, JETI Technishe VIS Instrumentic GmbH. Germany)]. Miniscan XE Plus and CM-3500d using identical measuring geometry with different size of viewing aperture. But Specbos 2100 using different measuring geometry. Within the limitation of this study, there were color difference (${\Delta}E^*$) from 2.4 to 7.8 between Miniscan XE Plus and CM-3500d, but $L^*$, $a^*$, $b^*$ values showed the high correlation. However, there were great color difference (${\Delta}E^*$) in the extent of about 20 between instruments with the different measuring geometry. Therefore, color scale measured by color measuring instrument should be used as a relative value rather than an absolute value in the field of dentistry.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.415-420
• /
• 1999

We estimated the quantity of the scum remaining on the Black Matrix (BM) surface of color filter. To do this, histogram was analyzed which was obtained from AFM image of the BM surface. We divided the histogram to two Gaussian functions of the free BM surface (1) and the scum (2), and calculated the areas ($a_1$, $a_2$) of both the Gaussian functions. We quantified the residue as the ratio of the area ($a_2/(a_1+a_2)$). As a result of the Gaussian functions of the free BM surface, it was revealed that another kind of residue remained on the BM surface. It was difficult to quantify it. but it could relatively be estimated from the average height and the standard deviation.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.269-276
• /
• 2012

The surface characteristics and performance of PTFE (polytetrafluoroethylene) hollow fiber membranes have been systematically investigated at lab- and pilot-scale to assess their application to membrane-bioreactor, particularly for integrating wastewater reclamation and rainwater harvesting. The PTFE membrane expressed some surface features, such as hydrophobicity, which might enhance membrane fouling. However, lab-scale performance and cleaning experiments under various conditions demonstrated that the PTFE membrane could produce the desirable water flux with good cleaning efficiency, implying easy operation and maintenance due to superior chemical resistance of PTFE membranes. Most of effluent water qualities were met with Korean standard for discharge and reuse, except color. Color level was further reduced by blending with rainwater at 75:25 ratio. Based on the lab-scale experimental results, the pilot plant was designed and operated. Pilot operation clearly showed sTable performance with satisfactory water quality, suggesting that PTFE membrane could be applied for decentralized MBR integrated with rainwater use.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.226-231
• /
• 1991

A graphic control language using function block diagram approach is designed and implemented, applicable to real-time control for continuous process automation system. The procedure implementing the control language is composed of three parts, editor, compiler, and executer. The editor generates the control algorithm file, which contains function block information in the text form, by menu-driven method on the color graphic screen. The compiler translates the contents of the control algorithm file to machine codes and their related data. Then, the executer generates a task that makes the machine codes executed at every sampling period in the target processor. The validity of the concept in its design and implementaion is assured by on-line simulation in the multi-function controller designed for continuous process automation.