• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.509-515
• /
• 2009

Three earthquakes with local magnitude ($M_L$) greater than 3.0 occurred on April 24, June 2 and September 12 in 1999 nearby the Gyeongju area. Redetermined epicenters were located within the radius of 1 km. We carried out waveform inversion analysis to estimate focal mechanism of June 2 event, and P and S wave polarity and their amplitude ratio analysis to estimate focal mechanisms of April 24 and September 12 events. June 2 and September 12 events had similar fault plane solutions each other. The fault plane solution of April 24 event included those of other 2 events, but its distribution range was relatively broad. Focal mechanisms of those events had a strike slip faulting with a small normal component. P-axes of those events were ENE-WSW which were similar to previous studies on the P-axis of the Korean Peninsula. Considering distances between epicenters, similarities of seismic waves and sameness of polarities of seismic data recorded at common seismic stations, these events might occurred at the same fault. The seismic moment of June 2 event was estimated to be $3.9\;{\times}\;10^{14}\;N{\cdot}m$ and this value corresponded to the moment magnitude ($M_W$) 3.7. The moment magnitude estimated by spectral analysis was 3.8, which was similar to that estimated by waveform inversion analysis. The average stress drop was estimated to be 7.5 MPa. Moment magnitudes of April 24 and September 12 events were estimated to be 3.2 and 3.4 by comparing the spectrum of those events recorded at common single seismic station.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.907-910
• /
• 2005

Although several artificial disc designs have been developed for the treatment of discogenic low back pain, biomechanical change with its implantation was rarely studied. To evaluate the effect of artificial disc implantation on the biomechanics of functional spinal unit, nonlinear three-dimensional finite element model of L4-L5 was developed with 1-mm CT scan data. Two models implanted with artificial discs, SB $Charit\acute{e}$ or Prodisc, via anterior approach were also developed. The implanted model predictions were compared with that of intact model. Angular motion of vertebral body, force on spinal ligaments and facet joint, and the stress distribution of vertebral endplate for flexion-extension, lateral bending, and axial rotation with a compressive preload of 400 N were compared. The implanted model showed increased flexion-extension range of motion and increased force in the vertically oriented ligaments, such as ligamentum flavum, supraspinous ligament and interspinous ligament. The increase of facet contact force on extension were greater in implanted models. The incresed stress distribution on vertebral endplate for implanted cases indicated that additinal bone growth around vertebral body and this is matched well with clinical observation. With axial rotation moment, relatively less axial rotation were observed in SB $Charit\acute{e}$ model than in ProDisc model.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.74-80
• /
• 2016

In this paper, structural characteristics for an extradosed prestressed concrete box girder bridge are investigated in terms of selective parameters. These parameters are mainly associated with the structural details of the extradosed bridge and derived from currently available literatures regarding previous design drawings. The analyses have been carried out using general-purpose structural analysis program, RM-Space Frame. The parameters evaluated for the present study represent the most salient features of the extradosed bridge and are as follows; 1) span length ratio(side-span length to center-span length), 2) boundary condition of girder, 3) height of pylon, 4) anchorage location of external cables and 5) girder stiffness. The analytical predictions indicate that span length ratio and pylon height are reasonably adequate in the range of 0.55 to 0.60 and $L_m/8$ to $L_m/12$ respectively for the bridge under consideration. Also, demonstrated is the boundary condition of girder, in which rigid-connection details give more efficiency than the continuous details. In addition, considering structural characteristics of the extradosed bridge, it is desirable that the girder stiffness should be determined by the stress range of external cables rather than bending moment of girder.

• The Korean Journal of Pesticide Science
• /
• v.6 no.2
• /
• pp.58-63
• /
• 2002

New photodynamic herbicidal 2,3-dihydro-2,2,4,5,6-pentamethylbenzofuran-5-yl, (I) and 2,3-dihydro-2-ethyl-2,4,5,6-tetramethylbenzofuran-5-yl, (II) substituents in 6-benzofury-2-[1-( alkoxyimino )alkyl]-3 hydroxycyclohex-2-en-1-one derivatives were synthesized and their herbicidal activities against rice plant (Oryza sativa L.), barnyard grass (Echinochloa crus-galli) and pickerel weed (Monochoria vaginalis presl.) were measured under submerged pre and post-emergence conditions. Particularly, a series of (I) compounds showed good selective herbicidal activities between the 3 leaf stage of rice plant and barnyard grass at rates of $0.25{\sim}0.0007kg/ha$. The structure activity relationships (SAR) on the herbicidal activity with changing N-alkoxy groups were discussed quantitatively. According to the SAR results, it was expected that the selectivity factor between seed of rice plant and barnyard grass should be rely on the N-alkoxy groups with bigger dipole moment and bigger (or smaller) $B_3$ constant than optimal value $(B_3)_{opt.}=4.41{\AA}$. Compared with (I), the (II) substituents showed more superior herbicidal activities.

• Journal of Plant Biotechnology
• /
• v.40 no.4
• /
• pp.224-230
• /
• 2013

Lily is an important cut-flower in Korea and world as well due to it's a variety of flower colors and various sizes of flowers. To develop elite lily cultivars, conventional breeding techniques have been used so far. However, an introduction of tissue culture system in mass propagation of bulbs and regeneration of shoots with a high efficiency is prerequisite at this moment. Especially, growth of bulbs and shoots as well as reduction of browning is critical factor to proliferate bulbs with shoots of superior lines or cultivar in lily. For this purpose, we tried to test whether ascorbic acid, citric acid and silver nitrate in medium to facilitate growth of bulbs and shoots as well as reduction of browning of bulb scales in lily. As a result, ascorbic acid and silver nitrate showed no significant differences compared to control plants in the growth of bulbs and shoots. When bulb scales were treated with $150mg{\cdot}l^{-1}$ of citric acid, formations of shoots and bulbs showed best result. While, bulb scale treated with $100mg{\cdot}l^{-1}$ of citric acid showed the growth of shoot and root as well as increasing of fresh weight compared to other treatments. Regarding the reduction of browning, $150mg{\cdot}l^{-1}$ of ascorbic acid showed the best result with the less than 2%. Although more experiments with several commercial varieties are needed in the future to establish mass propagation of bulbs of lily, results obtained in this study are supposed to provide the basic knowledge and contribution in tissue culture system of lily.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.72-81
• /
• 2014

Even though two-hands lifting/lowering activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting/lowering are also very common at the industrial site, forestry, farming, and daily life. The objective of this study was to compare one-hand lowering activity to lifting activity in terms of biomechanical stress for the range of lowering heights from knuckle height to 10cm above floor level with two workload 7.5kg and 15.0kg. Eight male subjects with LMM were asked to perform lifting/lowering tasks using both a one-handed (left-hand and right-hand) as well as a two-handed technique. Spinal loading was estimated through an EMG-assisted free-dynamic biomechanical model. The biomechanical stress of one-hand lowering activity was shown to be 43% lower than that of one-hand lifting activity. It was claimed that the biomechanical stress for one-hand lifting/lowering activity is almost twice (194%) of the one for two-hands lifting/lowering activity. It was also found that biomechanical stress by one-hand lowering/lifting activity with the half workload of two-hands lowering/lifting activity was greater than that of the two-hands lowering/lifting activity. Therefore, it might be a risk to consider the RWL of one-hand lowering/lifting activity to simply be a half of the RWL of two-hands lowering/lifting activity recommended by NIOSH.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.83-94
• /
• 2010

The objective of this study was to determine the best probability distributions of annual, seasonal and monthly precipitation in Korea. Data observed at 32 stations in Korea were analyzed using the L-moment ratio diagram and the average weighted distance (AWD) to identify the best probability distributions of each precipitation. The probability distribution was best represented by 3-parameter Weibull distribution (W3) for the annual precipitation, 3-parameter lognormal distribution (LN3) for spring and autumn seasons, and generalized extreme value distribution (GEV) for summer and winter seasons. The best probability distribution models for monthly precipitation were LN3 for January, W3 for February and July, 2-parameter Weibull distribution (W2) for March, generalized Pareto distribution (GPA) for April, September, October and November, GEV for May and June, and log-Pearson type III (LP3) for August and December. However, from the goodness-of-fit test for the best probability distributions of the best fit, GPA for April, September, October and November, and LN3 for January showed considerably high reject rates due to computational errors in estimation of the probability distribution parameters and relatively higher AWD values. Meanwhile, analyses using data from 55 stations including additional 23 stations indicated insignificant differences to those using original data. Further studies using more long-term data are needed to identify more optimal probability distributions for each precipitation.

• International Journal of Reliability and Applications
• /
• v.4 no.3
• /
• pp.113-129
• /
• 2003

Based on moments inequalities new testing procedures are derived for testing exponentiality against new renewal better than used (NRBU) and renewal new better than used (RNBU). These classes play an important role in formulating repair or replacement policies. The asymptotic Pitman efficiency of (NRBU) and (RNBU) testes are studied. Selected critical values are tabulated for sample sizes n=5(1) 50. The power estimates for some commonly used life distributions in reliability are also calculated. Some set of real data is used as an example to elucidate the use of the proposed test statistic for practical reliability analysis. The problem in case of right-censored data is also handled.

• Journal of Industrial Technology
• /
• v.2
• /
• pp.3-11
• /
• 1982

Reliability analysis methods have been employed in this study to determine the safety index ${\beta}$ for flexure associated with reinforced concrete designs that are in accordance with current USD code of Korea. In reliability analysis, the mean first-order second-moment methods are employed. The following specific conclusions can be drawn from this study; 1) Levels of safety for reinforced concrete design, measured by ${\beta}$, vary from 2.8 to 3.8 in flexure depending on the limit state, the ratio of live load to dead load and the uncertainties. 2) Target reliability ${\beta}$ associated with reinforced concrete beams in flexure is assumed to be 3.5~4.0 in Korea. 3) Load factors and resistance factors in flexure associated with the current provisions contained in USD code generally seem to be too high. The writer concluded the factors as following; ${\phi}=0.8,\;{\gamma}_D=1.1\;{\gamma}_L=1.75$.

• Journal of The Korean Astronomical Society
• /
• v.28 no.2
• /
• pp.109-117
• /
• 1995

The morphology and strength of the primordial magnetic field which is generated spontaneously in the early universe are studied for three models: (1) inflation (2) primordial magnetized bubble and (3) primordial turbulence models, We calculate the power spectra of magnetic field that are scale-free and proportional to $k^{1.5},k^{3{\sim}4}$ and $k^{2/3}$, respectively. The configurations of magnetic field having these power spectra are visualized. To constrain the present strength of the primordial magnetic field we calculate the anisotropy of the microwave background radiation in Bianchi type I universe with globally homogeneous magnetic field. From the COBE limit of the quadrupole moment of $({\delta}T/T)_{l=2}$ the present strength of horizen-scale magnetic fields $B_p$ is constrained to be less than $9{\times}10^{-8}G$.