• 제목/요약/키워드: L-series

검색결과 1,439건 처리시간 0.032초

온라인 L1 최적화를 통한 탐색기 비정렬 효과 제거 기법 (Optical Misalignment Cancellation via Online L1 Optimization)

  • 김종한;한유덕;황익호
    • 전기학회논문지
    • /
    • 제66권7호
    • /
    • pp.1078-1082
    • /
    • 2017
  • This paper presents an L1 optimization based filtering technique which effectively eliminates the optical misalignment effects encountered in the squint guidance mode with strapdown seekers. We formulated a series of L1 optimization problems in order to separate the bias and the gradient components from the measured data, and solved them via the alternating direction method of multipliers (ADMM) and sparse matrix decomposition techniques. The proposed technique was able to rapidly detect arbitrary discontinuities and gradient changes from the measured signals, and was shown to effectively cancel the undesirable effects coming from the seeker misalignment angles. The technique was implemented on embedded flight computers and the real-time operational performance was verified via the hardware-in-the-loop simulation (HILS) tests in parallel with the automatic target recognition algorithms and the intra-red synthetic target images.

Exploratory Design Modifications for Enhancing Cyclone Performance

  • Kim Hyeon-Tae;Lee Gyu-Won
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2000년도 추계학술대회 논문집
    • /
    • pp.419-420
    • /
    • 2000
  • The present study introduces and describes the characteristics of the spiral guide and groove body cyclones for the first time. The spiral guide was set inside the cyclone body or the inside of the cyclone body was grooved circumferentially or vertically. Except for the cyclone body, all configurations were the same. The particle collection efficiency for a conventional cyclone (Figure 1) was measured under a series of flow rates ranging from 15 L/min up to 80 L/min, and was compared with that yielded using existing theories. (omitted)

  • PDF

Preparation and Characterization of Tin(II) Complexes with Isomeric Series of Schiff Bases as Ligands

  • Refat, M. S.;Sadeek, S. A.
    • 대한화학회지
    • /
    • 제50권2호
    • /
    • pp.107-115
    • /
    • 2006
  • [X=ortho (L1), meta(L2) 및 para(L3)]리간드를 갖는 주석(II) 화합물들을 합성하고, 그 특성을 원소분석, 적외선 분광광도법, 자외선/가시광선 분광광도법 및 열분석법을 이용하여 확인하였다. 자외선 분광광도법을 통하여, 주어진 ONNO 주게 리간드들의 이민(imine) 및 카보닐기의 배위 모드가 C2v 대칭성을 갖는 것으로 나타났다. 또한 열분석 결과, Sn(L3) 화합물이 가장 높은 활성화 에너지를 가지는 반면, Sn(L2) 화합물이 가장 낮은 활성화 에너지를 가짐을 알 수 있었다.

변압기 직렬구조의 EV용 승압형 양방향 ZCS DC/DC 컨버터 개발 (Development of Boost Type Bidirectional ZCS DC/DC Converter For EV of Transformer Series Construction)

  • 최정식;박병철;정동화;송성근
    • 조명전기설비학회논문지
    • /
    • 제27권11호
    • /
    • pp.37-46
    • /
    • 2013
  • This paper proposes the boost type bidirectional zero current switching(ZCS) DC/DC converter of transformer series construction for electric vehicle operation using low voltage battery. This converter can high boost through the double voltage circuit and series construction of output part using two converters. This converter system has the advantages that bidirectional power transfer is excellent, size and making of transformer because of this converter keeps the transformation ratio to 1:1. Proposed DC/DC converter uses the ZCS method to decrease the switching loss. By replacing reactance ingredients of L-C resonance circuit for ZCS with leakage inductance ingredients of high frequency transformer and half-bridge capacitor it reduces system size and expense because of not add special reactor. It can confirm to output of high voltage to operate the electric vehicle with low voltage of input and operation of ZCS in all load region through the result of PSIM simulation and experiment.

지점빈도분석과 지역빈도분석을 이용한 확률홍수량 산정 (Estimation of Frequency-Based Flood Using At-Site Frequency Analysis and Regional Frequency Analysis)

  • 이길성;박경신;정은성;김상욱
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.2249-2253
    • /
    • 2008
  • 본 연구에서는 지점빈도분석과 지역빈도분석을 이용하여 확률홍수량을 산정 하였다. 지점빈도 분석은 Annual Maximum Series(AMS) 및 Partial Duration Series(PDS)를 이용하여 자료를 추출하고 각 자료에 적합한 확률분포를 이용하여 확률홍수량을 산정하였다. 그러나 AMS를 이용한 확률홍수량의 산정은 표본의 개수가 부족하면 이에 따른 변동성(variability)이 커지게 되는 단점이 존재하며, PDS를 사용하면 임계값(threshold)에 따른 주관적 영향이 결과에 반영되는 단점이 존재하는 것으로 알려져 있다. 따라서 본 연구에서는 PDS를 사용하는 경우의 단점을 해결하기 위해 연 1.7회의 발생횟수를 갖는 자료를 추출하고 몬테카를로 모의시험을 통하여 주관적 영향을 제거하였다. 또한 두 가지 방법에 의해 산정된 확률홍수량의 비교검토를 위해 지역빈도분석을 수행하였다. 유역의 면적과 일평균강우량으로부터 확률홍수량을 산정할 수 있는 것으로 알려진 Bayesian-Generalized Least Square(B-GLS) 방법을 이용하여 확률홍수량을 산정하였다. 최종적으로 안양천 유역의 13개 소유역에 대한 세 가지 방법에 의해 산정된 확률홍수량을 비교 검토한 결과, 특정한 방법이 항상 우수하다는 결론은 얻을 수 없었으나 각 유역별로 AMS가 가장 크고 B-GLS가 가장 작은 확률홍수량을 갖는 경향을 나타내었다.

  • PDF

직렬형 하이브리드 버스에서 보조동력장치의 고효율 작동을 위한 제어 알고리즘 (A Control Algorithm for Highly Efficient Operation of Auxiliary Power Unit in a Series Hybrid Electric Bus)

  • 함윤영;송승호;민병문;노태수;이재왕;이현동;김철수
    • 한국자동차공학회논문집
    • /
    • 제11권5호
    • /
    • pp.170-175
    • /
    • 2003
  • A control algorithm is developed for highly efficient operation of auxiliary power unit (APU) that consists of a diesel engine and a directly coupled induction generator in series hybrid electric Bus (SHEB). In a series hybrid configuration the APU supplies the electric power needed for maintaining the state of charge (SOC) of the battery unit in various conditions of vehicle operation. As the rotational speed of generator does not depend on the vehicle speed, an optimized operation of engine-generator unit based on the efficiency map of each component can be achieved. The output torque of diesel engine can be controlled by the amount of fuel injection, and the power converted from mechanical to electrical energy can be adjusted by generate control unit (GCU) using the decoupling vector control of torque and flux. As for the given reference of the generating power, the multiply of speed and torque, many combinations of operating speed and torque are possible. The algorithm decides the new operating point based on the engine efficiency map and generator characteristic curve. During the transition of operating points, the speed controller saturation is avoided using variable limit and filtering of generator torque reference. A test rig and SHEB consist of a 1.5L diesel engine and a 30kw induction generator are constructed by Hyundai Motor Company.

수치적(數値的) 접근방법(接近方法)에 의(依)한 산림토양(山林土壤)의 비옥도(肥沃度) 평가(評價) (Numerical Approach for Evaluation of Forest Soil Fertility)

  • 마상규
    • 한국산림과학회지
    • /
    • 제35권1호
    • /
    • pp.1-8
    • /
    • 1977
  • 산림토양(山林土壤)의 비옥도(肥沃度)를 수치분석방법(數値分析方法)으로 평가(評價)하였다. 본연구(本硏究)에서 35개(個) 토양통(土壤統)의 화학분석치(化學分析値)를 인용(引用)하였다. (표(表) 2) 조림수종(造林樹種)이 만족할 생장(生長)을 할 수 있는 최소양료함량(最小養料含量)의 평가(評價)는 표(表) 1과 같이 Wild씨(氏)의 기준치(基準値)에 준(準)했다. 시비요구수준(施肥要求水準)은 식(式)1을 사용(使用)하여 표(表)5와 같이 평가(評價)되었다. 토양통간(土壤統間)의 화학분석(化學成分)의 유사성(類似性)은 식(式)2를 이용(利用)하여 5개특성군(個特性群)으로 구분(區分)하였다. 1. 표토(表土)의 일반적(一般的)인 화학성질(化學性質) 공시통양토중(公試土壤統中) 약(約) 40%가 각각(各各) 유기물함량(有機物含量) 2%이하(以下), 인산함량(燐酸含量) 10ppm이하(以下), 치환성석회(置換性石灰)와 고토함량(苦土含量)이 1.25m.e/l00g 과 0.5m.e/100g 이하(以下)인 토양(土壤)이다. 치환성가리(置換性加里) 함량(含量)의 부족현상(不足現象)은 나타나지 않고 있다. CEC함량(含量)이 10m.e/100g 이하(以下)가 전체(全體)의 2/3가 되며 pH5.5이하(以下)인 강산성토양(强酸性土壤)이 전체(全體)의 4/5가 된다. 2. 각토양통(各土壤統)의 시비요구(施肥要求) 여부는 CEC, OM, MgO의 화학분석치(化學分析値)를 상대치화(相對値化)하여 공식(公式)1을 적용 간접적(間接的)으로 평가(評價)하였다. 35개(個) 토양통중(土壤統中) 8개통(個統)의 화학성분량(化學成分量)이 부족(不足)하여 시비요구(施肥要求)가 높은 것으로 생각되며 13개통(個統)의 화학성분(化學成分)으로 보아 시비(施肥)의 필요성(必要性)이 낮은 것으로 보여진다. 3. 토양통간(土壤統間) 화학성분(化學成分)의 유사성(類似性)을 비교(比較)한 결과(結果) 비옥도(肥沃度)는 다음과 같이 5개군(個群)으로 구분(區分)함이 적합(適合)한 것으로 생각된다. 1. CEC가 낮은 토양(土壤) 1-1 유기물함량(有機物含量)이 2%이라(以下)의 토양(土壤) 1-2 유기물함량(有機物含量)이 4%이라(以下)의 토양(土壤) 2. CEC와 유기물함량(有機物含量)이 높은 토양(土壤) 2-1 고토함량(苦土含量)이 낮은 토양(土壤) 2-2 고토함량(苦土含量)이 높은 토양(土壤) 3. 석회(石灰)와 고토함량(苦土含量) 높은 석회암질토양(石灰岩質土壤).

  • PDF

RAPD에 의한 한국산 붓꽃속(Iris)의 계통분류학적 연구 (A molecular systematic study of Korean Iris (Iridaceae) based on RAPD analysis)

  • 박선주;심정기;박홍덕
    • 식물분류학회지
    • /
    • 제32권4호
    • /
    • pp.383-396
    • /
    • 2002
  • 한국산 붓꽃속(Iris L.; Iridaceae) 15종과 비교군인 등심붓꽃속(Sisyrinchium auguistifolium Mill.)과 범부채속(Belamcanda chinensis (L). DC.)을 포함한 17분류군을 대상으로 RAPD분석이 수행되었다. 10개의 oligoprimer를 이용한 효소중합반응에서 80개의 유효한 polymorphic band가 확인되었다. 유전적 상사도 지수에 의하여 bootstrap을 포함한 neighbour-joining 방법을 통하여 계통수를 평가하였다. 한국산 붓꽃속은 3아속(Limniris, Crossiris, Pardanthopsis) 또는 2속과 1아속으로 분류되어지고, 붓꽃아속(Limniris)은 6개의 분계조를 형성하고 있어 Waddick(1992)이 설정한 2절, 6계열의 분류체계가 더 타당하다고 생각된다. Chinensis계열은 금붓꽃계열과 각시붓꽃계열로 구분되어진다. Tripetalae계열에 속하는 부채붓꽃은 Sibiricae계열(시베리아붓꽃, 붓꽃)과 매우 가까운 유연관계를 형성하고 있으며, Ensatae계열에 속하는 타래붓꽃은 Ruthenicae계열에 속하는 솔붓꽃, 난장이붓꽃과 가까운 유연관계를 나타내고 있다. RAPD 분석자료를 기초로 한 한국산 붓꽃속의 계통학적 연구는 형태학적, ITS 염기서열 결과와 비슷한 결과를 제시하였고, 많은 학자들에 의해 논란이 된 분류군들의 문제를 해결하는데 유용한 접근방법이라 생각되며, 전체 붓꽃속 수준에서의 계통분석에 유용한 도구로 이용될 수 있는 것으로 사료된다.

AR(1) 모형의 모수에 대한 L-추정법 (L-Estimation for the Parameter of the AR(l) Model)

  • 한상문;정병철
    • 응용통계연구
    • /
    • 제18권1호
    • /
    • pp.43-56
    • /
    • 2005
  • 본 연구에서는 AR(1) 과정을 따르는 시계열 모형에서 가산적 이상치(Additive Out-lier)가 존재하는 경우, 1차 자기상관계수에 대한 로버스트 추정방법으로 Rupport 와 Carroll (1980)에 의해 회귀모형에서 제안된 L-추정법 형태의 절사최소제곱추정 (PE 추정)방법을 제안하였다. 더불어 X축의 이상치에 대한 비중강하(down-weight)의 방법으로 Mallows의 가중함수를 고려한 유계영향 절사최소제곱 (bounded influence PE, BIPE)추정량을 제안하였으며 모의 실험을 통하여 각 추정량의 효율성을 비교하였다. 모의실험 결과, 다양한 자료의 오염률상에서 일반화 LAD추정치를 예비 추정치로 고려한 BIPE(LAD)-추정량의 효율이 좋은 것으로 나타났다.

L-모멘트 및 LH-모멘트에 의한 GEV 분포모형의 실계홍수량의 유도 (Derivation of Design Flood by L-Moments and LH-Moments in GEV distributiion)

  • 이순혁;박명근;맹승진;정연수;김동주;류경식
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
    • /
    • pp.479-485
    • /
    • 1999
  • This study was conducted to derived design floods by Generalized Extreme Value(GEV) distributiion for the annual maximum series at ten watersheds along Han, Nagdong, Geum , Yeongsan and Seomjin river systems. Adequency for the analysis of flood data used in this study was established by the test of Independence, Homogeneity , detection of Outliers. Coefficient of variation , skewness and kurtosis were calculated by the L-Moment, and LH-Moment ratio respectively. Parameters were estimated by the Method of L-Method of LH-Moment. Design floods obtained by Method of L-Moments and LH-Moments using different methods for plotting positions in GEV distributions and were compared with those obatined using the Method of L-Moments and LH-Moments by the Relative Mean Errors and Realtive Absoulte Errors. It was found that desgin floods derived by the method of L-Moments and LH-Moments using Cunnane plotting position foumula in the GEV distribution are much closer to those of the observed data in comparison with those obtained by methods of L-moments and LH-moments using the other formula for poltting postions from the viewpoint of Relative Mean Errors and Relative Absoulte Errors. In view of the fact that hydraulic structures indcluding dams and levees are generally usiong design floods with the return period of two hundred years or so, design floods derived by LH-Moments are seemed to be more reasonable than those of L-Moments in the GEV distribution.

  • PDF