• 제목/요약/키워드: L-band SAR

검색결과 70건 처리시간 0.027초

POTENTIAL OF MULTI-BAND SAR DATA FOR CLASSIFYING FOREST COVER TYPE

  • Shin, Jung-Il;Yoon, Jong-Suk;Kang, Sung-Jin;Lee, Kyu-Sung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.258-261
    • /
    • 2007
  • Although there have been lack of studies using X-band SAR data particularly for forestry application as compared to C-, and L-band SAR data, it has a potential to distinguish tree species because most signals are backscattered on the top of canopy. This study aimed to compare signal characteristics of multi-band SAR data including X-band for classifying tree species. The data used for the study are SIR-C/X-SAR data (X-, C-, L-band) obtained on Oct. 3, 1994 over the forest area near Seoul, S. Korea. Thirty ground sample plots were collected per each tree species. Initial comparison of backscattering coefficients among three SAR bands shows that X-band data showed better separation of tree species than C- and L-band SAR data irrespective of polarization. The weak penetrating in canopy layer might be possible source of information for X-band data to be useful for the classification of forest species and cover type mapping.

  • PDF

ALOS-1 L-band PALSAR와 COSMO-SkyMed X-band SAR 시계열 영상을 이용한 도심지 변위관측 성능 비교 분석 (Comparison of Observation Performance of Urban Displacement Using ALOS-1 L-band PALSAR and COSMO-SkyMed X-band SAR Time Series Images)

  • 최정현;김상완
    • 대한원격탐사학회지
    • /
    • 제34권2_1호
    • /
    • pp.283-293
    • /
    • 2018
  • 본 연구에서는 두개의 SAR 위성(ALOS-1과 COSMO-SkyMed) 영상에 PSInSAR 기술을 적용하여 각기 다른 센서 특성에 따른 변위 관측 성능의 차이를 분석하였다. 수치지형도 레이어로부터 건물 레이어를 추출하여, SAR 위성 영상으로부터 추출된 PS를 건물구조물과 지표면에서 추출되는 PS로 분류하고 각각 밀도 분석을 수행하였다. 연구지역에서 추출된 PS의 밀도는 ALOS-1 PALSAR의 경우 $0.023point/m^2$, COSMO-SkyMed는 $0.1point/m^2$로 ALOS-1에 비해 4배 이상의 PS가 추출되었다. 또한, 건물에서의 PS 밀도뿐만 아니라 지면에서의 관측 밀도도 크게 증가하였다. ALOS-1 PALSAR의 평균 변위속도는 ${\pm}1cm/yr$ 이내의 값을 갖는 반면 COSMO-SkyMed의 경우 ${\pm}0.3cm/yr$ 이내의 매우 안정적인 값을 보이고 있다. 비록 동일 기간의 자료를 사용한 것이 아니기 때문에 정량적인 비교는 어렵지만, L-band에 비해 X-band SAR 시스템의 변위관측 정밀도가 매우 높다고 할 수 있다. X-band와 L-band SAR 영상 비교분석을 통해 지반침하, 싱크홀과 같이 도심지 지표면에서 유용한 신호를 획득하는 것이 중요한 연구에서 PS 관측 밀도 및 변위 관측 정밀도를 고려하였을 때 X-band SAR 자료가 매우 효과적이다.

SURFACE DEFORMATION MONITORING USING TERRASAR-X INTERFEROMETRY

  • Kim, Sang-Wan;Wdowinski, Shimon;Dixon, Tim
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.422-425
    • /
    • 2008
  • TerraSAR-X is new radar satellite operated at X-band, multi polarization, and multi beam mode. Compared with C-band or L-band SAR, the X-band system inherently suffers from more temporal decorrelation, but is more sensitive to surface deformation monitoring due to short wavelength (3.1 cm) and high spatial resolution (1m-3m). It is generally expected that sensitivity to estimate surface movement using TerraSAR-X will be increased by the factor of 10, compared to current C-band system with low spatial resolution such as ERS-2, Envisat. Many urban areas are experiencing land subsidence due to water, oil and natural gas withdrawal, underground excavation, sediment compaction, and so on. Monitoring of surface deformation is valuable for effectively limiting damage areas. In addition high accuracy and spatially dense subsidence map can be achieved by X-band InSAR observation, promoting identification and separation of various subsidence processes and leading to enhanced understanding via mechanical modeling. In this study we will introduce some initial InSAR results using new TerraSAR-X SAR data for surface deformation monitoring.

  • PDF

A Statistical Analysis of JERS L-band SAR Backscatter and Coherence Data for Forest Type Discrimination

  • Zhu Cheng;Myeong Soo-Jeong
    • 대한원격탐사학회지
    • /
    • 제22권1호
    • /
    • pp.25-40
    • /
    • 2006
  • Synthetic aperture radar (SAR) from satellites provides the opportunity to regularly incorporate microwave information into forest classification. Radar backscatter can improve classification accuracy, and SAR interferometry could provide improved thematic information through the use of coherence. This research examined the potential of using multi-temporal JERS-l SAR (L band) backscatter information and interferometry in distinguishing forest classes of mountainous areas in the Northeastern U.S. for future forest mapping and monitoring. Raw image data from a pair of images were processed to produce coherence and backscatter data. To improve the geometric characteristics of both the coherence and the backscatter images, this study used the interferometric techniques. It was necessary to radiometrically correct radar backscatter to account for the effect of topography. This study developed a simplified method of radiometric correction for SAR imagery over the hilly terrain, and compared the forest-type discriminatory powers of the radar backscatter, the multi-temporal backscatter, the coherence, and the backscatter combined with the coherence. Statistical analysis showed that the method of radiometric correction has a substantial potential in separating forest types, and the coherence produced from an interferometric pair of images also showed a potential for distinguishing forest classes even though heavily forested conditions and long time separation of the images had limitations in the ability to get a high quality coherence. The method of combining the backscatter images from two different dates and the coherence in a multivariate approach in identifying forest types showed some potential. However, multi-temporal analysis of the backscatter was inconclusive because leaves were not the primary scatterers of a forest canopy at the L-band wavelengths. Further research in forest classification is suggested using diverse band width SAR imagery and fusing with other imagery source.

위성 레이다용 QM급 주파수합성기 설계 및 제작 (Design and Implementation on Frequency Synthesizer Qualification Model Level for SAR payload)

  • 김동식;김현철;허전;김완식
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권3호
    • /
    • pp.9-14
    • /
    • 2020
  • 본 논문에서는 SAR 탑재체에 적용할 수 있는 X-band 주파수합성기 인증모델(QM)을 설계 및 제작하고, 우주환경모의 시험을 통해 그 성능을 검증하였다. 제작된 주파수합성기는 상하향변환에 필요한 13.XXGHz 의 저잡음 국부신호를 생성하는 역할을 수행하며, 10Hz에서 1MHz 까지 측정된 적분 위상잡음은 -37.91 dBc 이다. 측정된 위상잡음을 통해 SAR 성능지표인 IRF성능 영향분석을 수행하였으며, 0.2 ps 의 지터로 PSLR과 ISLR에 영향 없이 SAR 시스템에 적용 가능함을 확인하였다. 또한, 열분석, 구조분석을 수행하여 안정성을 확인하였으며, 열진공, 열주기, 진동, 충격 시험을 통해 우주환경 내성을 확인하였다. 제작된 QM 급 주파수합성기는 L-band, C-band, Ku-band 주파수를 출력하며, 6U모듈 2개로 설계를 하였다. 본 연구를 통해 국내 위성용 RF 모듈의 국산화 기술 확보와 SAR 위성용 주파수합성기 기술 개발에 활용이 가능하다.

L밴드 인공위성 SAR를 이용한 동해 연안 해상풍 산출 및 오차 특성 (L-band SAR-derived Sea Surface Wind Retrieval off the East Coast of Korea and Error Characteristics)

  • 김태성;박경애;최원문;홍성욱;최병철;신인철;김경렬
    • 대한원격탐사학회지
    • /
    • 제28권5호
    • /
    • pp.477-487
    • /
    • 2012
  • L밴드 ALOS SAR 자료를 활용하여 우리나라 동해 연안해역의 해상풍을 산출하고 오차의 특성을 분석하였다. 그 동안 인공위성 산란계를 이용한 해상풍 산출이 본질적으로 불가능하였던 연안 해역에 대하여 SAR 자료로부터 고해상도 해상풍을 산출할 수 있었다. 산출된 SAR 바람을 해양 부이 자료와 비교한 결과 0.67 m/s의 작은 오차로 잘 일치함을 보여주었다. 서로 다른 L밴드 ALOS PALSAR GMF 2007 모델과 2009 모델로 산출된 해상풍을 인공위성 산란계 해상풍과 비교한 결과, 풍속과 풍향 각각 2.16 m/s와 $19.24^{\circ}$, 3.62 m/s와 $28.02^{\circ}$의 제곱평균근오차를 보이며, 인공위성 산란계의 기대 오차보다 다소 큰 경향을 나타냈다. 또한 산출된 L밴드 SAR 바람장은 풍향과 입사각에 대하여 특징적인 의존성을 보였다. L밴드 GMF 2007 모델은 $21^{\circ}$ 보다 작은 입사각에 대하여 큰 오차를 보인 반면, L밴드 GMF 2009 모델은 입사각에 대한 효과를 선형함수가 아니라 이차함수로 고려하여 주었기 때문에 작은 입사각 범위에서 풍속 오차가 6.8 m/s에서 1.14 m/s로 크게 감소하는 결과를 보였다. 본 연구는 L밴드 SAR 바람장의 다양한 활용을 위해서는 풍향과 입사각 효과, 그리고 다른 잠재적인 오차의 요인을 집중적으로 연구하여야 함을 강조하였다.

RELATIONSHIP BETWEEN FOREST STAND PARAMETERS AND MULTI-BAND SAR BACKSCATTERING

  • Shin, Jung-Il;Yoon, Jong-Suk;Lee, Kyu-Sung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.332-335
    • /
    • 2008
  • Newly developing SAR (Synthetic Aperture Radar) sensors commonly include high resolution X-band those data are expected to contribute various applications. Recent few studies are presenting potential of X-band SAR data in forest related application. This study tried to investigate the relationship between forest stand parameters and multi-band SAR normalized backscattering. Multi-band SAR data was radiometric corrected to compare signal from different forest stand condition. Then correlation coefficients were estimated between attribute of forest stand map and normalized backscattering coefficients. Although overall correlation coefficients are not high, only X-band shows strong relationship with DBH class than other bands. The signal of C- and L-band is composed of a large number of discrete tree components such as leaves, stems, even background soil. In forest, strength of radar backscattering is affected by complex parameters. Further study might be considered more various forest stand parameters such as canopy density, stand height, volume, and biomass.

  • PDF

JERS-1 L-band SAR Interferometry 를 이용한 연안매립지 지반침하 관측 (Ground Subsidence Estimation in a Coastal Reclaimed Land Using JERS-1 L-band SAR Interferometry)

  • 김상완;이창욱;원중선
    • 자원환경지질
    • /
    • 제35권5호
    • /
    • pp.465-478
    • /
    • 2002
  • JERS-1 L-밴드 SAR 위성에서 얻어진 5개의 interferogram을 이용하여 1996년 5월 2일부터 1998년 2월 21일 사이 연안매립지인 녹산 국가산업단지의 공단조성과정에서 발생한 지반침하량을 계산하였다. 약 16 m의 공간해상도를 갖는 레이더 관측결과는 현장측정 자료로부터 관측되기 어려운 세밀한 침하 양상을 잘 반영하였다. 정확도 검증을 위해 2-pass DInSAR로 구한 침하량을 Magnetic Probe Extensometer(측정정밀도:${\pm}$1 mm)를 사용하여 총 42개소에 서 측정된 현장자료와 비교하였다. 5개의 쌍으로부터 추정된 DInSAR침하량과 실측침하량의 평균 상관계수는 0.77 이다. 추정된 DInSAR 침하량 중 0.5 이상의 긴밀도를 갖는 점들만을 이용하여 계산한 경우 상관계수는 0.87이며, RMSE는 1.44 cm로 더욱 좋은 결과를 나타낸다. 또한 추정된 회귀선의 기울기는 1.04로 실측값과 DInSAR 추정값이 기울기 1에 가까운 선형관계를 잘 만족하고 있음을 보여준다. 즉 DInSAR 결과 긴밀도 0.5 이상의 지점을 이용하면 효과적으로 연안매립지의 침하량을 관측할 수 있다. DInSAR를 이용하여 계산된 녹산 국가산업단지에서 발생한 최대 누적침하량은 약 60 cm 정도이며, 연구지역의 북쪽과 남서쪽에서는 약 20 cm 이하의 침하가 관측되었다. 이러한 결과는 자연적인 지표변위 관측뿐만 아니라 지반공학적 응용분야에서도 DInSAR 기술이 매우 중요한 역할을 맡을 수 있음을 보여준다.

타겟 분해 기반 특징과 확률비 모델을 이용한 다중 주파수 편광 SAR 자료의 결정 수준 융합 (Decision Level Fusion of Multifrequency Polarimetric SAR Data Using Target Decomposition based Features and a Probabilistic Ratio Model)

  • 지광훈;박노욱
    • 대한원격탐사학회지
    • /
    • 제23권2호
    • /
    • pp.89-101
    • /
    • 2007
  • 이 논문에서는 토지 피복분류를 목적으로 C 밴드와 L 밴드 다중 편광 자료의 결정 수준 융합을 수행하여 융합 효과를 살펴보았다. 앞으로 이용이 가능해질 C 밴드 Radarsat-2 자료와 L 밴드 ALOS PALSAR 자료를 모사하기 위해 C 밴드와 L 밴드 NASA JPL AIRSAR 자료를 감독분류에 이용하였다. Target decomposition으로부터 얻어지는 산란 특성과 관련된 특징들을 입력으로 SVM을 분류 기법으로 적용한 후에, 사후확률을 확률비 모델의 틀안에서 융합하는 결정수준 융합을 수행하였다. 적용 결과, L 밴드가 C 밴드에 비해 피복 구분에 적절한 투과 심도를 나타내어 22% 정도 높은 분류 정확도를 나타내었지만, 결정수준 융합을 통해 개별 토지피복 항목의 구분력의 향상으로 인해 L 밴드 자료의 분류결과에 비해 10% 정도의 보다 향상된 분류 정확도를 얻을 수 있었다.

공간해상도에 따른 위성 영상레이더 위상간섭기법 긴밀도 분석 (Interferometric coherence analysis using space-borne synthetic aperture radar with respect to spatial resolution)

  • 홍상훈
    • 대한원격탐사학회지
    • /
    • 제29권4호
    • /
    • pp.389-397
    • /
    • 2013
  • 최근 고해상도 영상레이더를 탑재한 위성이 성공적으로 발사, 운용되고 있다. 이들 위성에서 획득된 자료를 이용한 위상간섭기법의 활용은 다양한 지구과학적 분야에서 보다 자세한 정보를 제공하고 있다. 위상간섭기법 적용에서 긴밀도는 영상레이더 자료로부터 생성된 위상간섭도 질을 평가하는 매우 중요한 요소이다. 본 연구에서는 미국 서부 텍사스에 위치한 엘파소 지역에 대한 고해상도 X-밴드 TerraSAR-X(TSX), L-밴드 ALOS PALSAR와 중해상도 C-밴드 Envisat ASAR 위성 영상레이더 자료의 긴밀도 특성을 분석 평가하고자 한다. 짧은 시간기선거리(temporal baseline) 조건에서 X-밴드 TSX 자료의 긴밀도는 0.3~0.6으로 L-밴드 ALOS PALSAR 자료와 유사한 정도의 높은 긴밀도를 나타내었다. 이 수치는 C-밴드 Envisat ASAR 자료에 비해서는 상당히 높은 것이며 영상레이더 신호의 파장이 길수록 위상간섭도의 긴밀도 유지에 있어 보다 유리하다는 일반적인 산란 이론을 고려해 볼 때 의미있는 결과라 할 수 있다. TSX 자료가 높은 긴밀도를 갖는 이유는 안정적인 산란 특성을 잘 반영할 수 있는 높은 공간 해상력이 하나의 원인일 것으로 추정된다. 하지만 11~33일 정도의 짧은 시간기선거리에서는 비교적 높은 긴밀도를 유지하는 반면에 시간기선거리가 다소 길어질 경우 긴밀도가 크게 저하된다. 본 연구 결과를 통해 긴밀도가 시간기선거리와 매우 밀접한 관계에 있음을 확인할 수 있었다.