• Title/Summary/Keyword: L-P모델

Search Result 442, Processing Time 0.034 seconds

Sampler Model of P-type Current Mode Control Utilizing Low Pass Filter (저역 통과 필터를 사용하는 P-type 전류모드제어의 샘플러 모델)

  • Jung, Young-Seok
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.17 no.5
    • /
    • pp.388-392
    • /
    • 2012
  • In this paper, a sampler model for the P-type current mode control employing low pass filter is proposed. Even though the frequency response of the compensator used in a P-type current mode control employing low pass filter is similar to that of P-type compensator, the sampler model has to be obtained from the method used in PI-type current mode control. In order to show the usefulness of the proposed method, prediction results of the proposed model are compared to those from the circuit level simulator, PSIM.

Quantitative Determination of pH and Salt Effects on the Soil Sorption Equilibrium of Pentachlorophenol (PCP) (pH와 염이 Pentachlorophenol의 토양 수착평형에 미치는 영향의 정량적 결정)

  • 오정은;이동수
    • Journal of the Korean Society of Groundwater Environment
    • /
    • v.4 no.1
    • /
    • pp.14-19
    • /
    • 1997
  • Laboratory experiments were conducted to study the effects of pH and salt level on the soil sorption equilibrium of pentachlorophenol (PCP) which is hydrophobic and ionogenic. Experimental results indicated that the sorption equilibrium constant (Kp) of PCP increased with decreasing pH. A quantitative sorption model involving linear isotherms was estabilished to predict the pH effect on the PCP sorption equilibrium over the pH range from 3 to 8. The model prediction was in good agreement with the experimental data. Also, the Kp increased with salt concentration over the entire pH range. At added salt levels less than 0.1M, increase in Kp was larger than when the added levels were higher than 0.1M. Salt might increase the PCP sorption by inducing 'salting out-effect' or by forming deprotonated PCP-cation ion pairs such as PCP$\^$-/K$\^$+/. Taking the pH range (5-8) and the salt content (up to 50 g/L) in the groundwater of Metropolitan landfill sites into consideration, the results indicated that the retardation factor of PCP in this area might range from 3 to 550 depending upon pH and salt content.

  • PDF

Real-time Monitoring of Environmental Properties at Seaweed Farm and a Simple Model for CO2 Budget (해조양식장 수질환경 모니터링을 통한 이산화탄소 단순 수지모델)

  • Shim, Jeong Hee;Kang, Dong-Jin;Han, In Sung;Kwon, Jung No;Lee, Yong-Hwa
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.17 no.4
    • /
    • pp.243-251
    • /
    • 2012
  • Real-time monitoring for environmental factors(temperature, salinity, chlorophyll, etc.) and carbonate components( pH and $fCO_2$) was conducted during 5-6th of July, 2012 at a seaweeds farm in Gijang, Busan. Surface temperature and salinity were ranged from $12.5{\sim}17.6^{\circ}C$ and 33.7~34.0, respectively, with highly daily and inter-daily variations due to tide, light frequency(day and night) and currents. Surface $fCO_2$ and pH showed a range of $381{\sim}402{\mu}atm$ and 8.03~8.15, and chlorophyll-a concentration in surface seawater ranged 0.8~5.8 ${\mu}g\;L^{-1}$. Environmental and carbonate factors showed the highest/lowest values around 5 pm of 5th July when the lowest tidal height and strongest thermocline in the water column, suggesting that biological production resulted in decrease of $CO_2$ and increase of pH in the seaweed farm. Processes affecting the surface $fCO_2$ distribution were evaluated using a simple budget model. In day time, biological productions by phytoplankton and macro algae are the main factors for $CO_2$ drawdown and counteracted the amount of $CO_2$ increase by temperature and air-sea exchange. The model values were a little higher than observed values in night time due to the over-estimation of physical mixing. The model suggested that algal production accounted about 14-40% of total $CO_2$ variation in seaweed farm.

Analgesic Effects of Drosera rotundifolia L. Pharmacopuncture at Taegye(KI3) Acupoint on Formalin-induced Pain (Formalin으로 유도된 통증 모델에서 태계혈(太谿穴)(KI3)의 원엽 모고채(Drosera rotundifolia L.) 약침의 진통효과)

  • Oh, Se Jung;Kim, Jae Soo;Lee, Yun Kyu;Lee, Hyun Jong
    • Journal of Acupuncture Research
    • /
    • v.33 no.1
    • /
    • pp.37-46
    • /
    • 2016
  • Objectives : The objective of this study is to evaluate the analgesic effects of Drosera rotundifolia L. pharmacopuncture on formalin-induced pain in Sprague-Dawley(SD) rats. Methods : In this experiment there were four groups, each with six SD rats. In the normal group (NOR), normal saline $40{\mu}L$ was injected at right KI3, and normal saline $40{\mu}L$ was injected at right hindpaw 35 minutes later. In the control group (CON), normal saline $40{\mu}L$ was injected at right KI3, and formalin 5 % $40{\mu}L$ was injected at right hindpaw 35 minutes later. In the Drosera rotundifolia L. pharmacopuncture 3 % group (DP3), Drosera rotundifolia L. pharmacopuncture 3 % $40{\mu}L$ was injected at right KI3, and formalin 5 % $40{\mu}L$ was injected at right hindpaw 35 minutes later. In the Drosera rotundifolia L. pharmacopuncture 5 % group (DP5), Drosera rotundifolia L. pharmacopuncture 5 % $40{\mu}L$ was injected at right KI3, and formalin 5 % $40{\mu}L$ was injected at right hindpaw 35 minutes later. We analyzed ultrasonic vocalization (USV), Substance P, aspartate aminotransferase(AST), and alanine aminotransferase(ALT). Results : In the early phase of USV, both DP3 and DP5 had an analgesic effect. In the late phase, DP5 had an analgesic effect compared to CON. Substance P in DP5 was significantly decreased compared to CON. In regards to blood AST and ALT, there was no significant difference among NOR, CON, DP3 or DP5. Conclusion : These results suggest that Drosera rotundifolia L. pharmacopuncture helps to reduce formalin-induced pain. It's mechanism is related to substance P, and Drosera rotundifolia L. pharmacopuncture has no influence on liver toxicity.

The Combined Antiallodynic Effect of Gabapentin and Milnacipran in a Rat Neuropathic Pain Model (흰 쥐의 신경병증성 통증 모델에서 Gabapentin과 Milnacipran의 병용 효과)

  • Lee, Hyeon Jeong;Shin, Sang-Wook;Jang, Hee Jeong
    • The Korean Journal of Pain
    • /
    • v.20 no.1
    • /
    • pp.8-14
    • /
    • 2007
  • Background: Anticonvulsants and antidepressants are adjuvant analgesic drugs that are used widely for treating chronic neuropathic pain syndromes. The combined analgesic effect of gabapentin and milnacipran was investigated with a rat neuropathic pain model. Methods: The rat neuropathic pain model was made by ligating the spinal nerves (L5 and L6). An intrathecal catheter was inserted into the subarachnoid space. Tactile allodynia was tested with the up-down method using von Frey hair. We determined the antiallodynic effect of intraperitoneal (I.P.) and intrathecal (I.T.) gabapentin. The combined effect of I.P. gabapentin (50 mg/kg) and milnacipran (0, 10 and 30 mg/kg) was investigated. Results: Intraperitoneal and intrathecal administration of gabapentin increased the threshold for tactile allodynia (the ED50 was 60.6 mg/kg and $45.5{\mu}g$, respectively). Co-administration of I.P. milnacipran increased the antiallodynic effect of I.P. gabapentin in a dose-dependent fashion. Conclusion: The combined administration of milnacipran and gabapentin may increase the total analgesic effect during treatment of neuropathic pain.

Removal of Reactive Dyes using Chitin-based Adsorbent PEI-chitin (키틴 기반 흡착제 PEI-chitin을 이용한 반응성염료의 제거)

  • Kim, Gyeong Min;Wang, Zhuo;Won, Sung Wook
    • Korean Chemical Engineering Research
    • /
    • v.57 no.2
    • /
    • pp.232-238
    • /
    • 2019
  • Polyethylenimine-crosslinked chitin (PEI-chitin) was developed as a biosorbent to effectively remove dyestuffs from dye-containing wastewater. A representative reactive dye, Reactive Orange 16 (RO16) was used as a model dye. The effect of pH, isotherm, kinetic and desorption experiments were performed to evaluate the adsorption/desorption ability of PEI-chitin for RO16. As a result, the maximum adsorption capacity calculated by the Langmuir model was 266.3 mg/g at pH 2, and the time needed for adsorption equilibrium was evaluated to be about 20, 60, and 240 min for 50, 100, and 200 mg/L, respectively. The desorption experiments were carried out using various eluents such as ammonia/ethanol mixture, NaOH, $NaHCO_3$, and $Na_2CO_3$, and the highest desorption rate was 75.24% in the ammonia/ethanol mixture.

Efficacy of Cu(II) Adsorption by Chemical Modification of Pine Bark (소나무 수피의 화학적 처리에 의한 Cu(II) 흡착 효과)

  • Park, Se-Keun;Kim, Ha-Na;Kim, Yeong-Kwan
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.29 no.8
    • /
    • pp.930-937
    • /
    • 2007
  • Korean pine(Pinus densiflora) bark was evaluated for its adsorption capacity of Cu(II) ions from aqueous solution by running a series of batch experiments. Prior to the tests, the milled barks were treated with 1 N NaOH or 1 N HCl to examine the effect of surface modification. For comparison, untreated bark was tested under same condition. Within the tested pH range between 3 and 6, NaOH treatment increased Cu(II) adsorption capacity by $139\sim184%$, while HCl treatment decreased it by $37\sim42%$. Maximum copper ion uptake by bark was observed at pH $5\sim6$, but pH of solution was not a potent influence. A pseudo second-order kinetic model fitted well for the sorption of copper ion onto bark. For NaOH-treated bark, the calculated sorption capacity$(q_e)$ increased from 6.58 to 12.77 mg/g, while the equilibrium rate constant$(k_2)$ decreased from 0.284 to 0.014 g/mg/min as initial Cu(II) concentration doubled from 100 mg/L. A batch isotherm test using NaOH-treated bark showed that equilibrium sorption data were represented by both the Langmuir model and the Freundlich model. It was confirmed that carboxylic acid of bark was involved in the Cu(II) adsorption. For NaOH-treated bark, in particular, carboxylate ion produced by hydrolysis or saponification appeared to be a major functional roup responsible for the enhanced Cu(II) sorption.

Molecular Design and Characterization of Biodegradable Crosslinked Copolyesters (생분해성 가교 공중합에스테르의 분자설계 및 특성 연구)

  • Sung, Yong-Kiel;Han, Seung-Jun
    • Polymer(Korea)
    • /
    • v.25 no.1
    • /
    • pp.108-114
    • /
    • 2001
  • Crosslinked poly(glycerol-co-malate)s were synthesized from L-malic acid in Krebs cycle and glycerol. The synthesized polymer was identified by FT-IR spectroscopy. Swelling degrees of the copolymer hydrogels were increased with an increase in pH of the aqueous solution. Hydrolytic behaviors of the crosslinked copolymers were investigated in various pH buffer solutions at 37${\circ}C$. The Hydrolysis of the copolymers proceeded faster with increasing pH of the aqueous solution. Releasing behaviors of the model drug such as diclofenac monosodium salt were also measured in various pH aqueous solutions at 37${\circ}C$. The release concentration of diclofenac monosodium salt from the hydrogel systems was increased with increasing pH. These facts indicate that the unreacted carboxyl and hydroxyl groups in the copolymers are greatly affected by pH in the conditions.

  • PDF

Temporal Dynamics of Water Quality in Junam Reservoir, as a Nest of Migratory Birds (철새도래지인 주남저수지의 계절적 수질변동)

  • Lee, Eui-Haeng;An, Kwang-Guk
    • Korean Journal of Ecology and Environment
    • /
    • v.42 no.1
    • /
    • pp.9-18
    • /
    • 2009
  • The objectives of this study were to evaluate seasonal and interannual variations of water quality and nutrient input (N, P) in Junam Reservoir, a nesting waterbody of migratory birds, over 10 years during 1998$\sim$2007 along with dynamic relations of trophic parameters using empirical models. Concentrations of COD averaged 7.8 mg $L^{-1}$ during the study, while TN and TP were $1.4\;mg\;L^{-1}$ and $83{\mu}g\;L^{-1}$, respectively, indicating an eutrophic-hypereutrophic state. Values of monthly COD had strong positive relations (r=0.669, p<0.001) with conductivity, indicating that summer rainfall resulted in an ionic dilution of the reservoir water by rainwater and contributed better water quality. One-way ANOVA tests showed significant differences (F=$5.2{\sim}12.9$, p<0.05) in TN and TP between the before and after the bird migration. In other words, nutrient levels were greater in the absence of migratory birds than in the presence of the migratory birds, suggesting a no-effect on nutrient inputs by the birds. Also, one-way ANOVA indicated no significant differences (F=$0.37{\sim}0.48$, p>0.05) in $NO_{3^-}N$ and $NH_{3^-}N$ between the before and after the birds migration. Linear empirical models using trophic parameters showed that algal biomass as CHL, had significant low correlations with TN ($R^2$=0.143, p<0.001, n=119) and TP ($R^2$=0.192, p<0.001, n=119). These results suggest that influences of nutrients on the CHL were evident, but the effect was weak. This fact was supported by analysis of Trophic State Index Deviation (TSID). Over 70% in the observed values of "TSI (CHL)-TSI (SD)" and "TSI (CHL)-TSI (TP)" were less than zero, suggesting a light limitation on the CHL by inorganic suspended solids.

Investigation of Flow and Heat Transfer Characteristics of Plate Heat Exchanger Taking into Account Entrance Effects and Variation in Corrugation Height (입구영향 및 주름높이의 변화를 고려한 판형열교환기의 유동 및 열전달 특성)

  • Moh, Jeong-Hah
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.11
    • /
    • pp.965-973
    • /
    • 2010
  • Numerical analysis has been carried out to investigate the heat transfer characteristics of a plate heat exchanger. The multi-cell models with inlet part and outlet part are used for performing numerical simulation. The plate heat exchanger is characterized by chevron angle of $15^{\circ}$, corrugation pitch of 24mm and corrugation height 6~12mm. The length of the inlet-part considered in the analysis ranges from 24.8 to 124mm and Reynolds numbers range from 1,000 to 10,000. The correlations such as friction factor and Colburn factor are compared with previous experimental data. The results can be utilized for designing the plate heat exchanger.