• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.2
• /
• pp.168-176
• /
• 2011

Purpose: The purpose of this study was to identify differences between intake and output balance and body weight changes and to identify factors related to differences in critically ill patients. Methods: The participants for this descriptive correlational study were 65 medical surgical ICU patients. The data were collected from patient medical records. Results: Mean age of the patients was 63.80 years (${\pm}15.21$). Body weight changes for 48 hours averaged 281.54g (${\pm}2210.48$). I&O balance for 48 hours corrected for insensible loss averaged 398.1ml. Differences ranged from 45mL to 7,535mL. In the distribution of absolute difference between body weight change and intake and output balance, only 40% of the patients were within less than 1,000 mL. Factors relating to accurate measure of intake and output were ventilation methods, respiration patterns, and edema status. Conclusion: Although mean values of weight change and I&O balance for all patients were very close, the range of differences was very wide indicating that, for many patients, intake and output is not an appropriate indicator of body fluid balance. Therefore, because of the frequency fever and/or hyperventilation, nurses need to use caution when using intake and output balance only to estimate current body fluid status for critically ill patients.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.1008-1016
• /
• 1995

The purpose of this study is to examine the vest patterns with better fitness, function and beauty best suited to the bodies because the previous studies on the vest pattern are not enough to be usable for its making and wearing including the emperiment and practice as well as its direct design and cutting although its wearing range has been widely popular. This study was carried out by making the experimental vest and performing its wearing experiment. The result of this study is summarized as follows. 1. The sensory evaluation on apperance showed that the wholoe average of pattern 4 was the highest for all S, M, L bodies. In addition, it was shown by the bodies that the most suitable related patterns included pattern 4-M body, pattern 2-S body and pattern 4-L body. However, the L body indicated the lowest score in all patterns. Then, this fact means that the diversified studies must be carried out on the vest patterns for the bodies. 2. The results on the function of vertical motions indicated that when the motion angle increased the lifting volume of the vertical motion also increased proportionally, and that the motion at $135^{\circ}$ among these verical motions showed the highest score. Therefore, it is required to consider this fact when determining the vest length in the process of making the vest pattern. 3. The results on the twisted degree of a posture showed that as to the experimental results on these vertical motions the twisted degree increased with the increase of angle. This fact seems to be also important in deforming the vest length when making the vest.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1995-2001
• /
• 2001

In this study, a small punch creep(SP-Creep) test using miniaturized specimen(10${\times}$10${\times}$0.5mm) is described to develop the new creep test method for high temperature structural materials. The SP-Creep test is applied to 2.25Cr-lMo(STBA24) steel which is widely used as boiler tube material. The test temperatures applied for the creep deformation of miniaturized specimens are between 550∼600$^{\circ}C$. The SP-Creep curves depend definitely on applied load and creep temperature, and show the three stages of creep behavior like in conventional uniaxial tensile creep curves. The load exponent of miniaturized specimen decreases with increasing test temperature, and its behavior is similar to stress exponent behavior of uniaxial creep test. The creep activation energy obtained from the relationship between SP-Creep rate and test temperature decreases as the applied load increases. A predicting equation or SP-Creep rate for 2.25Cr-lMo steel is suggested. and a good agreement between experimental and calculated data has been found.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.697-700
• /
• 2006

저수시 하천유량(Low Streamflow)의 추정은 하천의 수질관리, 용수공급계획, 댐 방류계획등의 수자원관리에 있어서 매우 중요한 부분이다. 이러한 중요성에 따라 Vogel과 Kroll (1989)은 저수시 하천유량을 추정하기 위한 여러 가지 확률분포함수를 제안하였다. 가장 흔히 제안되어지는 이변수 확률분포(Two-Parameter Distribution)로는 Lognormal 분포와 Weibull 분포가 있으며 이와 더불어 Three-Parameter Lognormal, Three-Parameter Weibull, Log Person Type Ⅲ 분포도 널리 사용되어진다. 그러나 이러한 여러 가지 확률 분포함수 중에서 가장 적절한 확률분포의 선택은 저수시 하천유량의 물리적인 측면과는 상관없이 주로 적합도(Gooness of Fit)에 기인된 통계치에 의해서만 결정되기도 하는데 이러한 경우 잘못된 가정을 받아들이는 확률이 높아짐에 따라 추정결과의 신뢰성(Reliability)을 감소시킬 수 있다. 이러한 문제점을 극복하기 위해서 Onoz와 Bayazit (2001)는 Recession Curve를 지수함수로 가정하고 최대 갈수 기간의 길이(Maximum Dry Period Length)의 확률에 대한 이론적인 결과치들을 사용하여 Weibull 분포의 특정한 경우에 해당되어지는 Power 분포를 유도하였으며 유도된 Power 분포의 매개변수를 추정하기 위하여 L-Moment 방법을 사용하였다. 또한 Onoz와 Bayazit (2001) 작은 유출량에서 확률분포와 잘 맞지 않는 경우 작은 유출량값에 작은 가중치를 부여하여 확률분포에 대한 영향을 줄이는 방법인 LL-Moment 방법을 제안하였다. 본 연구에서는 낙동강 유역의 1번부터 5번 소유역에 대해 SSARR 모형을 이용하여 모의한 유출량을 이용하여 Weibull 분포, L-Moment방법에 의해 추정된 매개변수를 사용한 Power 분포, LL-Moment 방법에 의해 추정된 매개변수를 사용한 Power 분포를 적용하였으며 이들 분포의 적합도를 PPCC Test를 사용하여 평가해봄으로써 낙동강 유역에서의 저수시의 유출량 추정에 대한 Power 분포의 적용성을 판단해 보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1085-1091
• /
• 2014

We developed a single-channel thread sensor for a rotary bobbin by optical sensing and analyzed the signal characteristics. A specially designed mount made of ABS (acrylonitrile-butadiene-styrene) resin that encapsulated an optical sensor was fabricated by using a 3D printer and was attached to the rotary bobbin system. Stable control on a weaving machine was achieved by observing the difference in the output signals of an optical sensor system, which vary significantly according to the states of the thread in the weaving operation. The optical sensor effectively detects an unintentional thread cut and run-out during weaving fast enough to enable prompt stopping of the weaving machine, thereby minimizing the loss of expensive fabrics.

• Journal of Chest Surgery
• /
• v.30 no.3
• /
• pp.293-299
• /
• 1997

With the introduction of new cardiac prosthesis, it behooves surgeons and cardiologists to monitor its performance carefully. ATS (Advancing The Standard) prosthetic valve has been used first in Guro hospital in Korea, since August 1994. Between August 1994 and July 1995, 21 patients received 28 ATS prosthesis(9 aortic, 19 mitral).19mi1ra1 valves were implanted through the "Extended Transseptal Approach" 10 were ma e and 11 were female, ranging from 20 to 54 years of age(Mean age : 37 years). The follow up period 126 patient-months(mean 6.1 months), varied from 1 month to 12 months. NYHA functional class was improved significantly, from $2.9\pm0.7$ preoperatively to $1.4\pm0.5$ postoperatively. Ejection fraction was also improved from $55.5\pm6.1%$ preoperatively to 59.8 $\pm7.4%$ postoperatively. Lactic dehydrogenase(LDH) was used as an indicator of hemolysis. The value of LDH changed from 483.3 $\pm$ 162 lUlL preoperatively to $527\pm274$ lUff postoperatively with no clinical significailce. Valve related complications, such as thromboembolism, valve thrombosis, anticoagulant related hemorrhage and prosthetic valve endocarditis did not develop except one anticoagulant related intracranial hemorrhage. There were no mortalities. This experience encourages us to continue using the ATS prosthetic valve, and this study will help those patients who need to have their heart valves replaced. replaced.

• The Korean Journal of Malacology
• /
• v.17 no.1
• /
• pp.63-70
• /
• 2001

The distribution and seasonal changes of the intertidal macrobenthos community was performed on five intertidal rocky stations of Hwasoon at Jeju Islands September 1999 to August 2000. The macrobenthos was composed of six phyla, 13 classes, 24 orders, 49 families, and 97 species. The dominant species of the upper zones were Nodilittorina exigua, Notoacmea schrenckii, Liolophura japonica and Patelloida saccharina. Those of the middle zones were Monodonta labio, Chthamalus challengeri, Siphonalia japonica and Liolophura japonica. Those of the lower zones were Siphonalia sirius, Patelloida saccharina, Chthamalus challengeri, and Liolophura japonica. The community dominance indices of the upper zones were much higher than those of the middle and lower zones. Species diversity and evenness in all investigated zones were highest in station 1 and lowest in staton 3. But, species richness was highest in station 1 and lowest in station 4.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.5
• /
• pp.26-33
• /
• 2002

The design method of robust $H_{\infty}$ filtering for discrete-time uncertain linear systems is investigated in this paper. The uncertain parameters are assumed to be unknown but belonging to known convex compact set of polytope type. The objective is to design a stable robust $H_{\infty}$ filter guaranteeing the asymptotic stability of filtering error dynamics and present an $L_2$ induced norm bound analytically for the modified $H_{\infty}$ performance measure. The sufficient condition for the existence of robust $H_{\infty}$ filter and the filter design method are established by LMI(linear matrix inequality) approach, which can be solved efficiently by convex optimization. The proposed algorithm is checked through an example.

• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.22-39
• /
• 1995

Following "Studies on Characteristics of Pin us densiflora Forest in Kangwon Province (III)- Studies on the Tree-Root Form and Distribution on the Campus Forest, Kangwon Nat'l Univ.-", the form and distribution of root system was investigated for 5 trees in Songhyun-Ri, Wangsan-Myon, Myengju-Gun, Kangwon Province. Vertical tap roots and flat roots were established very well. In root distribution, fine roots were sparsly distributed (+), although 7 smaller quadrats($10{\times}10cm$) were found with the value of 1(+~20%) index of fine root; big roots 0.2cm thick in diameter were most common. More than 50% of fine roots and big roots were found around the depth of 10~30cm in soil.

• Journal of Nutrition and Health
• /
• v.35 no.4
• /
• pp.421-430
• /
• 2002

This study was performed to investigate the influence of dietary and extract foods from A. capilliaris Thunberg on plasma and liver lipid metabolism in male Sprague-Dawley rats. For the experiment of liver and plasma lipid metabolism, Rats were find diets containing normal concentrations of fat or high concentrations of lard and two different preparations of A. capillaris Thunberg ; control diet (group C),50 mg/kg body weight A. capillary Thunberg methanol extract (group M), 6 g/kg diet A. capillary Thunberg dried powder (group P), high lard control diet (group L), 50 mg/kg body weight A. capillaris Thunberg with high lard (group LM) and 6 g/kg diet A. capillary Thunberg with hi\ulcorner lard (group LP). Effects of A. capillary Thunberg on plasma total cholesterol. High-density lipoprotein (HDL) cholesterol, Atherogenic index, triglyceride, plasma and liver peroxide contents, fatty acid composition of liver lipid and the distribution of fat droplets of liver. Supplementation of A. capillaris Thunberg resulted in lower plasma cholesterol, atherogenic index and triglyceride, and higher HDL-cholesterol in rats find high lard diets. However, these effects were not observed with low level of fat (groups C, M and P). A shift caused by feeding high lard diets in increased plasma and liver peroxides, saturated fatty arid composition of liver lipid and the more frequent distribution of fat droplets in liver could be reversed by feeding A. capillary Thunberg. This study suggests that A. capillary Thunberg co alter lipid metabolism in plasma and liver.