• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.677-682
• /
• 2004

In this paper, A novel spatial power combiner with wideband printed dipole antennas and balanced amplifier is proposed. The wideband spatial power combiner is proposed to improve power capability and bandwidth by using balanced amplifier and wideband printed dipole antenna, respectively, The proposed 4${\times}$1 spatial power combiner with those components has the characteristics that the 3-dB bandwidth is 1.02 GHz (17 ％), and the effective isotropic power gain (EIPG) is 24.04 dB at 6 GHz. Also, power combining efficiency is 68.69％.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1540-1548
• /
• 1999

We propose a multi-resolution motion estimation algorithm using adaptive search region. It is constructed in wavelet domain that a binary plane which represents the potential motion areas(PMA's) based on the temporal redundancy between video frames, and motion estimation is processed in the PMA's. We reduce the PMA's gradually as the resolution level is higher, considering the distribution of the energy in subband layers and the complexity. As compared with EMRME(enhanced multi-resolution motion estimation) method[7], simulation results show that computational amount and bit rate reduced to about 33 ~46 % and 10 ~l8% respectively in active image with similar PSNR, and computational amount reduced to about 37 ~65 % in small notion image with similar PSNR and bit rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.4
• /
• pp.288-299
• /
• 1996

The co-channel digital radio-relay system improves effectively the use of radio frequency allocations by transmitting signals separately on both orthogonal allocations, and thereby not only the total transmission capacity of frequency band but also its bandwidth effciency are almost doubled, compared tothe interleaved digital radio-relay system. Therefore, the study on the development and application of the con-channel scheme is of importance, for the efficient use of limited frequency bnad. In this paper, we derived the eqations for calculating fade margin as a function of path length as well as error performance in terms of the outage probability for co-channel digital radio-relay system below 10GHz. And, simulation was given to demonstrate how to apply those equations to the real situation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.97-102
• /
• 2004

In this paper, a new predistorter controlling modified individual order jntermodulation distortion signals is proposed. The proposed predistorter generates and controls predistorted third and high order IM signals independently. Using predistorted signals, jntermodulation distortion signals of power amplifier are suppressed effectively. The predistortion linearizer has been implemented to operate in Korean PCS basestation transmitting band (1840～1870MHz). The test results show that IMD3 and IMD5 (C/I) of power amplifier are improved more than 40dB and 23dB for CW two tone signals, respectively. The predistorter improves the adjacent channel power ratio (ACPR) more than 10dB at 885KHz offset point for CDMA (IS-95) signals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1283-1291
• /
• 2002

In this paper, the PLL driven by the DDFS is designed on the schematic using the Q-logic cell based library and is implemented using FPGA QL32 x16B. The measurement results of the frequency synthesizer switching speed were agreement with a register. The simulated results show that the clock delay was generated after eleven clock and if input is random, It has influence on output DA converter has to be very extensive. Therefore, the DDFS used noise shaper to drive PLL by regular interval for input state. Also the bandwidth of DA converter very extensive, the simulation shows that the variation of small input control word is better than the switching speed of PLL.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1217-1219
• /
• 2003

상용화되어 있는 이동통신 기기의 Front-end 부분은 듀플렉서와 필터를 포함하는 수동소자로 구성되어 있다. 듀플렉서의 임피던스 정합선로는 전송선로 이론으로부터 설계하며, 단순하게 ${\lambda}=1/4$ 파장 길이의 정합 선로를 설치하는 것이기 때문에 정합선로를 이용한 듀플렉서 성능을 극대화하기 위한 설계의 융통성이 없는게 현실이다. 이런 문제점을 해결하기 위하여 집중소자(lumped element)인 R L C를 탄성 표면파 듀플렉서 대신 스위치 모들에 적용하게 된다면 여러 가지 다양한 형태의 회로를 구현할 수 있고 회로망 내에 위치하는 집중소자의 정격을 최적화하여 스위치 모듈의 성능을 향상시킬 수 있는 가능성이 있다. 본 연구에서는 $900 MHz{\sim}2.2 GHz$의 대역에서 소형화 집적화에 적용 가능한 디바이스를 개발하기 위하여 고주파, 저진압, 저손실 스위치 모듈의 제조와 구성되는 커패시터와 인덕터의 제조와 특성에 관하여 연구하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.303-307
• /
• 2008

In this paper, a new co-planar waveguide ultra-wideband aperture is designed. The designed antenna consists of a rectangular aperture on a determined ground plane and a mushroom shaped stub. The mushroom-shaped stub, which is simple, convenient to analyze and optimise, has less parameter. This antenna has compact aperture size $21.1{\times}8.1mm^2$, designed on FR-4 substrate with dielectric constant of 4.3, thickness of l.5mm. CPW fed planar antenna has the advantages of wide-bandwidth, low-cost and easy interaction with the radio frequency front end circuitry.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.835-846
• /
• 1999

In this experiment I have made FM-DS/SS system replacing 170.120 MHz by utilizing FM transmitter and receiver. In the transmitter, the result shows that the modulated FM-DS/SS signal is a typical $(sin \chi/\chi)^2$ spectrum by using the clock(1.329 MHz) of PN divided from FM carrier. In the receiver, SO(Synchronous Oscillator) was applied to despread. Like figure 1, 2, and 4 when I applied SO, which consists of sliding correlator, to synchronous a favorable properties could be obtained in the receiver of FM-DS/SS system. In this paper, I used SO in order to take synchronous in the construction of FM-DS/SS system, and to support it I presented the result of the experiment on synchronous curve and properties of OS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1335-1340
• /
• 2003

In this paper, a single balanced diode Mixer for the homodyne FMCW radar to detect distance and velocity of a vehicle target is designed and implemented using a microstrip line and two schottky barrier beam lead diodes. This mixer is optimally designed to have less a conversion loss within the 100 MHz bandwidth with a little LO injection power and a higher LO isolation as soon as possible through the embedded electrical length of microsrtrip line placed between the coupler and diode matching, considering together LO matching condition. The measured results show 6 dB of conversion loss, 23 dB LO/RF isolation and 3 dBm of input 1l dB, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.368-377
• /
• 1999

In this paper, the wide-band CDMA transmitter for 2 GHz band is designed and implemented. The CC-OQPSK implemented as ASIC has better spectral and power efficiency than the conventional QPSK system because it has constant envelope characteristics. Good harmonics rejection characteristics and gain of 20 dB are shown on the intermediate frequency stage using double-conversion scheme. The output power of two-stage RF amplifier is +2l.14 dBm in 1.9 GHz band. It is confirmed that the electrical characteristics of the transmitter satisfy with required the specification of the wide-band CDMA transmitter for 2 GHz band.