• 제목/요약/키워드: L/W ratio

검색결과 721건 처리시간 0.031초

전산유체역학과 ADV기술을 이용한 장폭비의 DAF조내 수리흐름에 미치는 영향 연구 (Examining the Effect of L/W Ratio on the Hydro-dynamic Behavior in DAF System Using CFD & ADV Technique)

  • 박노석;권순범;이선주;배철호;김정현;안효원
    • 상하수도학회지
    • /
    • 제19권4호
    • /
    • pp.421-428
    • /
    • 2005
  • Dissolved air flotation (OAF) is a solid-liquid separation system that uses fine bubbles rising from bottom to remove particles in water. In this study, we investigated the effect of L/W (L; Length, W; Width) on the hydro-dynamic behavior in DAF system using CFD (Computational Fluid Dynamics) and ADV (Acoustic Doppler Velocimetry) technique. The factual full-scale DAF system, L/W ratio of 1:1, was selected and various L/W ratio (2:1, 3:1, 4:1 and 5:1) conditions were simulated with CFD. For modelling, 2-phase (gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. Also, for verification of CFD simulation results, we measured the factual velocity at some points in the full-scale DAF system with ADV technique. Both the simulation and the measurement results were in good accordance with each other. As the results of this study, we concluded that L/W ratio and outlet geometry play important role for flow pattern and fine bubble distribution in the flotation zone. In the ratio of 1:1, the dead zone is less than those in other cases. On the other hands, in the ration of 3:1, the fine bubbles were more evenly distributed.

Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population

  • Oh, Yeon-Ah;Yang, Hong-So;Park, Sang-Won;Lim, Hyun-Pil;Yun, Kwi-Dug;Park, Chan
    • The Journal of Advanced Prosthodontics
    • /
    • 제9권2호
    • /
    • pp.93-98
    • /
    • 2017
  • PURPOSE. The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. MATERIALS AND METHODS. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. RESULTS. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. CONCLUSION. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

전산유체를 활용한 정수지 최적 도류벽 형태 및 경제적인 장폭비 산정 (Evaluation of Economic L/W Ratio and the Best Shape of Baffle in Clearwell by Using CFD)

  • 조영만;노재순;빈재훈;김태균;최영준
    • 대한환경공학회지
    • /
    • 제33권6호
    • /
    • pp.432-438
    • /
    • 2011
  • 현재 국내 정수지 도류벽은 형태와 장폭비에 대한 명확한 기준이 없고 장폭비가 너무 작아 소독능을 만족하지 못하거나 지나치게 큰 장폭비로 비경제적인 설계를 하는 등 많은 혼란을 겪고 있어 수리적으로 유리한 도류벽의 형태와 경제적인 장폭비를 결정하는 것이 시급한 실정이다. 본 연구는 다양한 도류벽의 형태와 장폭비에 대해 전산유체역학 기법을 활용하여 수리적으로 가장 유리한 도류벽의 형태를 제시하고 가장 경제적인 장폭비를 도출하였다. 연구결과, 정수지내 도류벽의 형태는 동일한 형태와 구조라 하더라도 수류의 방향전환 횟수가 적은 구조가 수리적으로 유리하다. 둘째, 최적 도류벽 형태는 좌우 우류식(model 2)이며 최악의 형태는 두 방향으로 분산되고 다시 모아지는 분산형(model 4) 형태이다. 좌우 우류식은 분산형보다 도류벽의 개수를 67% 정도 줄일 수 있다. 셋째, 좌우 우류식 도류벽인 경우 경제적인 장폭비는 30~50이며 50을 초과할 경우 공사비 대비 $T_{10}/T$ 값의 증가량이 미미하여 경제적이지 못하다.

일부 대학생의 지방산 섭취량과 섭취지방산의 w3, w6계 지방산 및 P/M/S 비율에 관한 연구 (A Study on w6/w3 and P/M/S Ratios of Fatty Acids Ingested by University Students)

  • 오경원;박계숙;김택제;이양자
    • Journal of Nutrition and Health
    • /
    • 제24권5호
    • /
    • pp.399-407
    • /
    • 1991
  • The purpose of this study was to estimate the intake of individual fatty acid and eventually to contribute to the establishment of dietary guidelines and recommendations of fatty acids for the Koreans. The subjects consisted of female college students aged 20 to 29 years old. Their dietary intake was assessed twice. in summer and in winter, by means of a 24-hour dietary recall method. Food models and other measuring tools were also used. Concentrations of serm total triglyceride, total cholesterol and HDL-& LDL-cholesterol were measured. The subjects consumed 12.3g of polyunsaturated fatty acids, 14.3g of monounsaturated fatty acids and 14.99g of saturated fatty acids per day The ratios of polyunsaturated/saturated fatty acids( P/S) and polyunsaturatedimonounsaturatedi saturated fatty acids (P/M/S) taken by the subjects were 0.8/1.0 and 0.8/l.0/l.0, respectively. The ratio of w61w3 fatty acids was found to be 8.3/l.0. All of these values seem to fall in the desirable range. The percentages of total calorie from carbohydrate. fat and protein were 59.4%, 23.4% and 17.2%, respectively. The concentrations of serum total triglyceride, total cholesterol. HDL-cholesterol and LDL-cholesterol were 59.3ms/dl, 192.7mg/dl, and 59.0mg/dl, and 121.9mg/dl., respectively.

  • PDF

사수트렉터를 위한 효율적인 정기방법과 포장형상에 관한 연구 (Studies on Efficient Plowing Methods and the Shapes of Field for 4 Wheel Tractor)

  • 원장우
    • 한국농공학회지
    • /
    • 제12권3호
    • /
    • pp.2019-2028
    • /
    • 1970
  • 1. 트랙터에 의(依)한 효율적(效率的) 경기방법(耕起方法)을 실험(實驗) 고찰(考察)하여 다음과 같은 결과(結果)를 얻었다. 가. 포장내측경기(圃場內側耕起)에 있어서 선회소요시간(旋回所要時間)을 최소(最少)하는 효율적(效率的) 선회법(旋回法)은 선회간격(旋回間隔)이 zr(r=최소선회반경(最少旋回半徑))보다 작을때는 Q 자형(字型), 클때는 U 자형(字型)이다. 나. 포장내측경기(圃場內側耕起)의 단위선회구(單位旋回區) 건(巾) w는 2.5r 시(時) 가장 효율적(效率的)이다. 다. 포장주변부(圃場周邊部) 경기(耕起)에 있어서는 W>-0.0345L + 35.84 시(時)는 혼합경법(混合耕法)이 능률적(能率的)이고 W<-0.0345 + 35.84 시(時)는 반접속경법(半接續耕法)이 능률적(能率的)이다. 라. 포장주변부(圃場周邊部)의 건(巾)l는 내측경기시(內側 耕起時)와 주변경기시(周邊耕起時)에 있어서 모두 적을수록 효과적임으로 최소치(最少値)인 2r가 가장 적합(適合)하다. 2. 트랙터에 의(依)한 단위포장(單位圃場)과 경기능률(耕起能率)과의 관계(關係)를 고찰(考察)하여 다음과 같은 결과(結果)를 얻었다. 가. 종횡비(縱橫比)$\frac{L}{W}$ 및 면적(面積) A가 크면 일반적(一般的)으로 경기능률(耕起能率)은 증가(增加)한다. 나. 경기능률(耕起能率)의 증가율(增加率)은 종횡비(縱橫比) 및 면적(面積)이 크면 클수록 증가율(增加率)이 점차적으로 감소(減少)한다. 다. $\frac{L}{W}-T$ 곡선(曲線)에서 $\frac{L}{W}$에 대(對)한 T의 변화(變化)가 큰 범위(範圍)는 대략(大略) 20a에서 6, 30a에서 5, 50a에서 4, 80a에서 3, 100a에서 2.5 이내(以內)이다. 라. T-A 곡선(曲線)의 변화율(變化率)은 $\frac{L}{W}$의 영향(影響)을 받으나 대략(大略) $T=A^{-\frac{2}{3}}$ 곡선(曲線)의 변화율(變化率)과 같다. 마. 종횡비(縱橫比)가 3이상(以上)일때는 면적(面積)의 크기에 상관(相關)없이 경기능률(耕起能率)에 미치는 10a 면적증가(面積增加)의 효과는 약(約) 5 정도(程度)의 종횡비(縱橫比) 증가효과와 같다. 바. 종횡비(縱橫比)가 $2{\sim}3$일때는 면적(面積)의 크기에 상관(相關)없이 경기능률(耕起能率)에 미치는 10a 면적증가(面積增加)의 효과는 약(約) $4{\sim}2$ 정도(程度)의 종횡비(縱橫比) 증가효과와 같으면 이는 종횡비(縱橫比)가 적을수록, 면적(面積)이 클수록 차차(次次) 감소(減少)한다.

  • PDF

년생 및 재배조건이 인삼의 엽형에 미치는 영향 (Effects of Plant Age and Cultural Conditions on Leaf Shape of Korean Ginseng)

  • 이종철;최창렬
    • Journal of Ginseng Research
    • /
    • 제8권2호
    • /
    • pp.178-183
    • /
    • 1984
  • This study was conducted to know the influence of plant age and cultural conditions such as plant population density and light intensity under the shading on the leaf shape of panax ginseng. The result obtained were as follows; 1) Leaf length(L)/maximum width(W) was no difference with different age of over 3-over 3year old plant, but that of 1 or 2-yearold was smaller than those of over 3-year old. The values of L/W showed in the order of 2 or 4,3, 1 or 5 leaflet. 2) Ratios of leaflet area to leaf area were 32.0% in leaflet 3, from 209.% to 27.9% in leaflet 2 or 4, and from 6.5% to 7.1% in leaflet 1 or 5. 3) The coefficients of variability for L/W and ratio of leaflet area to leaf area of leaflet 3 were smallest among leaflets. 4) There were significant differences between largest and smallest leaflet 3, leaf areas and ratio of leaflet 3 area to leaf area in same plant. 5) LW and ratio of leaflet 3 area to leaf area were not affected by plant population density. 6) It showed a tendency that the L/W was increased with increasing the light transmittance rate (LTR). The ratio of leaflet 3 area to leaf area of ginseng grown under 20% LTR was not different comparing to that of plant grown under 5% LTR, but it was significantly increased in plant grown at 100% LTR.

  • PDF

Impact of Fin Aspect Ratio on Short-Channel Control and Drivability of Multiple-Gate SOI MOSFET's

  • Omura, Yasuhisa;Konishi, Hideki;Yoshimoto, Kazuhisa
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제8권4호
    • /
    • pp.302-310
    • /
    • 2008
  • This paper puts forward an advanced consideration on the design of scaled multiple-gate FET (MuGFET); the aspect ratio ($R_{h/w}$) of the fin height (h) to fin width (w) of MuGFET is considered with the aid of 3-D device simulations. Since any change in the aspect ratio must consider the trade-off between drivability and short-channel effects, it is shown that optimization of the aspect ratio is essential in designing MuGFET's. It is clearly seen that the triple-gate (TG) FET is superior to the conventional FinFET from the viewpoints of drivability and short-channel effects as was to be expected. It can be concluded that the guideline of w < L/3, where L is the channel length, is essential to suppress the short-channel effects of TG-FET.

Soda Pulping of Torch Ginger Stem: Promising Source of Nonwood-Based Cellulose

  • ZENDRATO, Herman Marius;DEVI, Yunita Shinta;MASRUCHIN, Nanang;WISTARA, Nyoman J.
    • Journal of the Korean Wood Science and Technology
    • /
    • 제49권4호
    • /
    • pp.287-298
    • /
    • 2021
  • Torch ginger (Etlingera elatior Jack) is a potential source of lignocellulose material for various derivative products. This study aims to determine the chemical components, ratio of syringyl to guaiacyl units (S/G) in lignin, and crystallinity of the biomass of torch ginger. The effects of soda pulping on the chemical characteristics of torch ginger pulp were also studied. Pulping of the chips was conducted with active alkali of 15%, 20%, and 25% and a Liquor-to-Wood (L/W) ratio of 4:1, 5:1, and 6:1. The impregnation and pulping times at maximum temperature (170℃) were 120 and 90 min, respectively. To assess the effect of treatments on the properties of pulping, a two-factorial experimental design was applied. Results showed that the content of α-cellulose and hemicellulose in the torch ginger was 48.48% and 31.50%, respectively, with an S/G ratio of 0.70 in lignin. Soda pulping changed the crystalline structure of the biomass from triclinic to monoclinic. Active alkali, L/W ratio, and interactions considerably influenced the observed responses. The degree of delignification increased with an increase in the loading of active alkali, which lead to a decrease in the kappa number of the pulp. An active alkali content of 25% and an L/W ratio of 6:1 resulted in the highest delignification selectivity with a kappa number of 2.78 and a yield of 24%. Given its cellulose content and ease of pulping, torch ginger can be a potential raw material for derivative products that require delignification as pretreatment. However, the increase in cellulose crystallinity should be considered when converting torch ginger to bioethanol.

정수지내 사류지역이 수리학적 효율에 미치는 영향 연구 (The Effect of Dead Zone on Hydraulic Efficiency in Clearwell)

  • 이승재;신은허;김성훈;박희경
    • 상하수도학회지
    • /
    • 제21권2호
    • /
    • pp.177-185
    • /
    • 2007
  • Hydraulic efficiency($T_{10}/T$) in clearwell is often estimated by L/W ratio. However, this estimation is not accurate because other factors which give an effect on hydraulic efficiency such as shape of basin, diffuser wall and intra-basin is ignored. Therefore, in this research, hydraulic efficiency is predicted by the quantitative analysis of dead zone using CFD simulation in a pilot scale clearwell. The results show that the reason why higher L/W ratio increase the hydraulic efficiency is to decrease the dead zone of linear region which is located between baffles. Diffuser wall or intra-basin also affects on hydraulic efficiency with this process. Also, we conclude that hydraulic efficiency can not be reached to 0.8 or higher.

Fingernail Configuration

  • Jung, Jin Woo;Kim, Kwang Seog;Shin, Jun Ho;Kwon, Yu Jin;Hwang, Jae Ha;Lee, Sam Yong
    • Archives of Plastic Surgery
    • /
    • 제42권6호
    • /
    • pp.753-760
    • /
    • 2015
  • Background A number of conditions can alter a person's fingernail configuration. The ratio between fingernail width and length (W/L) is an important aesthetic criterion, and some underlying diseases can alter the size of the fingernail. Fingernail curvature can be altered by systemic disorders or disorders of the fingernail itself. Although the shape and curvature of the fingernail can provide diagnostic clues for various diseases, few studies have precisely characterized normal fingernail configuration. Methods We measured the W/L ratio of the fingernail, transverse fingernail curvature, hand length, hand breadth, and distal interphalangeal joint width in 300 volunteers with healthy fingernails. We also investigated whether age, sex, height, and handedness influenced the fingernail W/L ratio and transverse fingernail curvature. Results In women, fingernail W/L ratios were similar across all five fingers, and were lower than those in men. The highest value of transverse fingernail curvature was found in the thumb, followed by the index, middle, ring, and little fingers. Handedness and aging influenced transverse fingernail curvature, but not the fingernail W/L ratio. Fingernails were flatter on the dominant hand than on the non-dominant hand. The radius of transverse fingernail curvature increased with age, indicating that fingernails tended to flatten with age. Conclusions Our quantitative data on fingernail configuration can be used as a reference range for diagnosing various diseases and deformities of the fingernail, and for performing reconstructive or aesthetic fingernail surgery.