• 제목/요약/키워드: L/D rate

검색결과 1,965건 처리시간 0.029초

낙동강에서 수질모델 실행을 위한 탈산소계수의 평가 (Estimation of CBOD Decay Rate for the Execution of Water Quality Model in the Nakdong-River Basin)

  • 유재정;윤영삼;이혜진;김문수;양상용;이영준
    • 한국물환경학회지
    • /
    • 제21권5호
    • /
    • pp.511-515
    • /
    • 2005
  • CBOD(carbonaceous BOD) decay rate was investigated for the execution of water quality model in Nakdong-Rive basin. Estimation of laboratory-derived CBOD decay rate, $k_l$ and CBOD decay rate in natural waters, $k_d$ were carried out. Hydraulic factors were applied for the calculation of $k_d$. Values of biochemical oxygen demand were investigated in Weagwan, Koreong, Jeokpo, Namgi and Mulgeom sites for the four times. The ranges of $k_l$ value were $0.04{\pm}0.01{\sim}0.14{\pm}0.03$. The values of $k_l$ in upstream sites were much larger than those in the downstream sites. The values of $k_d$ were 0.025, 0.036, 0.005 and 0.001 at Weagwan, Jeokpo, Namgi and Mulgeom, respectively, indicating that values of $k_d$ were generally larger than those of $k_l$.

ABR과 ASBR 형태에 따른 혐기성 메탄 발효 운전 성능 평가 (Performance Evaluation of ABR and ASBR for Anaerobic Methane Fermentation)

  • 이채영;이세욱
    • 유기물자원화
    • /
    • 제19권2호
    • /
    • pp.49-54
    • /
    • 2011
  • 본 연구는 혐기성 수소 발효 반응조의 유출수를 기질로 이용하여 anaerobic baffled reactor (ABR) 및 anaerobic sequencing batch reactor (ASBR) 형태에 따른 혐기성 메탄 발효 성능을 평가하였다. 두 개의 반응조는 유기물 부하율 $1.0kg\;COD/m^3{\cdot}d$와 수리학적 체류시간 20일에서 운전을 수행하였다. ABR과 ASBR의 초기 운전 기간에서 메탄 발생량은 각각 0.04 L/L/d와 0.19 L/L/d로 나타났으며, ABR과 ASBR의 최대 메탄 발생량은 각각 0.25 L/L/d와 0.31 L/L/d로 나타났다. ABR과 ASBR의 초기 운전 기간에서 COD 제거율은 각각 89%와 92%로 나타났다. 정상 상태에 도달한 후에는 ABR과 ASBR의 COD 및 VS의 제거율은 각각 90% 이상 유지되었다. 비메탄 활성도는 미생물이 기질에 적응함에 따라 반응조에 상관없이 증가하였다.

Burkholderia sp. D5에 의한 phenanthrene과 pyrene 분해 (Degradation of Phenanthrene and Pyrene by Burkholderia sp. D5)

  • 김태정;조경숙;류희욱
    • 미생물학회지
    • /
    • 제39권4호
    • /
    • pp.267-271
    • /
    • 2003
  • Polycyclic aromatic hydrocarbons(PAHs)를 분해하는 Burkholderia sp. D5를 유류 오염 토양으로 분리하였고, PAHs의 분해특성을 조사하였다. 분리균주는 유일 탄소원으로 phenanthrene(Phe)을 이용하여 생장이 가능하였고, pyrene (Pyr)을 유일 탄소원으로 이용하여 생장하지는 못하였으나 yeast extract(YE)를 공기질로 첨가해 준 조건에서는 Pyr를 분해할 수 있었다. 분리 균주의 PAH 분해속도는 YE, peptone 및 glucose의 첨가에 의해 향상되었으며, 특히 YE 첨가 효과가 가장 우수하였다. 무기염배지(BSM)에 215 mg-Phe/L와 1 g-YE/L를 첨가한 조건에서 Burkholderia sp. D5의 비생장속도(0.28/h)와 Phe 분해속도(29.30 ${\mu}mol$/L/h)는 YE를 첨가하지 않은 조건에서 얻은 비생장속도(0.02/h)와 Phe 분해속도(12.00 ${\mu}mol$/L/h)의 각각 10배 및 2배였다. Phe를 기질로 공급한 경우 최대 비생장속도(${\mu}$_max)와 최대 Phe분해속도(V_max)는 각각 0.34 h-1 및 89 ${\mu}mol$/L/h 이었고. Pyr을 기질로 공급한 경우 ${\mu}$_max와 V_max는 각각 0.27 h-1 및 50 ${\mu}mol$/L/h이었다. Phe 혹은 Pyr 단독 기질하에서 분해속도와 비교 하였을 때(29.30 ${\mu}mol$-Phe L/h, 9.58 ${\mu}mol$-Pyr L/h), 두 기질의 혼합조건에서 Phe와 Pyr 분해속도는 각각 2.20 및 2.18 ${\mu}mol$ L/ h로 저하되었다. Burkholderia sp. D5 균주는 토양에서 Phe와 Pyr을 분해할 수 있었는데, Phe와 Pyr 분해속도는 각각 20.03 및 1.09 ${\mu}mol$ L/h 이었다.

수온과 광주기에 따른 볼락, Sebastes inermis 치어의 산소 소비율 (Effects of Water Temperature and Photoperiod on the Oxygen Consumption Rate of Juvenile Dark-banded Rockfish, Sebastes inermis)

  • 오승용;노충환
    • 한국양식학회지
    • /
    • 제19권3호
    • /
    • pp.210-215
    • /
    • 2006
  • 수온과 광주기에 따른 볼락 치어의 대사율 변화를 조사하기 위해 평균 무게 $20.5{\pm}0.7g$을 대상으로 수온(10, 15, 20, $25^{\circ}C$)과 광주기(24L:0D, 12L:12D, 0L:24D)에 따른 산소 소비율은 측정하였다. 12가지 실험 조합의 산소 소비율은 유수식 형태의 호흡실을 이용하여 24시간 동안, 3반복 측정하였다. 수온과 광주기 그리고 두 인자의 상호작용 모두가 볼락 치어의 산소 소비율에 유의한 영향을 미쳤다(P<0.001). 각 광주기 조건에서 수온 상승에 따라 산소 소비율은 유의적으로 증가하였다(P<0.01). 10, 15, 20 그리고 $25^{\circ}C$에서의 시간당 평균 산소 소비율은 각각 $178.3\sim283.5,\;386.7\sim530.7,\;529.2\sim754.3$ 그리고 $590.0\sim785.5mg\;O_2kg^{-1}h^{-1}$였으며, $Q_{10}$ 값은 $10\sim15,\;15\sim20,\;25\sim25^{\circ}C$에서 각각 $3.17\sim5.51,\;1.87\sim2.10,\;1.08\sim1.24$이었다. 연속 명기(24L:0D)에서의 산소 소비율은 연속 암기(0L:24D)에서보다 유의하게 높았다(P<0.05). $10^{\circ}C$를 제외한 모든 수온 조건에서 12L:12D에서 가장 높은 산소 소비율을 보였으며, 24L:0D의 명기에서의 산소 소비율은 같은 조건의 암기 때보다 유의하게 높은 산소 소비율을 보였다(P<0.05). 이 실험 결과는 각 수온과 광주기 조건에서의 볼락 치어의 산소 소비율을 파악할 수 있으며, 사육관리 및 생리적 반응 정량화를 위한 생체역학 모델 결정에 활용할 수 있다.

Liquid Crystal을 이용한 원형충돌분류의 전열특성 연구 (Heat Transfer on a Heated Flat Plate by an Impinging Round Jet Using Liquid Crystal)

  • 오승묵;이상준
    • 대한기계학회논문집
    • /
    • 제16권8호
    • /
    • pp.1566-1574
    • /
    • 1992
  • 본 연구에서는 원형수직 충돌분류에 의한 가열평판의 전열특성을 해석하기 위 하여 최근 표면온도 측정에 많이 사용되고 있는 liquid crystal을 이용하였다. 즉 liquid crystal의 감온특성과 영상처리 기법을 이용하여 레이놀즈수 및 노즐과 충돌판 사이의 거리(L/D) 변화에 따른 전열면의 온도장 변화를 측정하였다.

Candida parapsilosis에 의한 Xylitol 생산시 균체농도가 미치는 영향 (Effect of Cell Density on Xylitol Fermentation by Candida parapsilosis)

  • 김상용;윤상현;김정민;오덕근
    • 한국식품과학회지
    • /
    • 제28권5호
    • /
    • pp.970-973
    • /
    • 1996
  • Candida parapsilosis KFCC-10875를 사용하여 균체농도가 xylose로부터 xylitol의 생산에 미치는 영향을 조사하였다. Xylitol 생산속도는 균체농도 20 g/l에서 최대값 2.8 g/l-h를 보여주었으며 비 xylitol 생산속도는 농축된 균제에 의한 산소제한으로 균체농도가 증가할수록 감소하였다. 약 20 g/l로 농축된 균체를 사용하여 초기 xylose농도가 xylitol 생산에 미치는 영향을 살펴본 결과 xylitol 생산속도, 비 xylitol 생산속도 및 xylose에 대한 xylitol의 수율은 xylose의 농도 170 g/l에서 최대값을 보여주었다. 고농도의 균체를 사용하려면 xylose의 배지에서 배양된 균체를 다시 농축하여야 한다. 이러한 단점을 해결하기 위하여 발효과정 중에 균체를 농축하는 방법을 시도하였다. 고농도 균체를 얻기위하여 지수증식기인 배양 초기에는 용존산소의 농노를 충분히 유지시켜 18시간 배양하여 약 20 g/l의 고농도 균체를 얻을 수 있었다. 고농도 균체를 이용하여 xylitol을 생산하기 위하여 용존산소의 농도를 0.7-1.5%로 낮추어 유지하였다. 이때, 기질의 농도는 xylose 농도가 170 g/l 이상에서는 xylitol 생산성이 비교적 크게 감소하므로 xylitol 생산성의 향상을 위하여 고농도의 xylose를 피하는 유가식 배양을 수행하였다. 그 결과 56시간 배양하여 200 g/l xylose로부터 약 140 g/l의 xylitol을 생산할 수 있었다.

  • PDF

Effects of Auxins and Cytokinins on Organogenesis of Soybean Glycine max L.

  • Kim, Kyong-Ho;Park, Ho-Ki;Park, Moon-Soo;Yeo, Up-Dong
    • Journal of Plant Biotechnology
    • /
    • 제3권2호
    • /
    • pp.95-100
    • /
    • 2001
  • To select the section with shoot formation ability, the calli and shoot formation from three sections (first leaf including cotyledonary node, hypocotyl and cotyledon explants) of 5-days-seedlings of soybean were induced on MS medium supplemented with 1.0 mg/L BAP, 3% sucrose, and 0.3% gelrite for one month. The first leaf section exhibited the highest shoot formation rate (51%), followed the hypocotyl section (10%) and the cotyledon section (0%). The shoot formation rates and shoot number of the four excised sections (whole first leaf, a half of the first leaf, a third of the first leaf and only node) of the first leaf were also investigated on the same medium. A half of the first leaf explant and the third of the first leaf explant had higher shoot formation rates (76-80%) and numbers (3-4 / explants) than those in other two explants. Effects of six cytokinins (kinetin, zeatin, BAP, 2iP, PBA, and TDZ) on shoot formation were determined, using the half of the first leaf explants. Zeatin (1.0 mg/L) exhibited the highest in shoot formation rate (94%) and numbers (8 / explant). In addition, the combined effects of three cytokinins (zeatin, BAP, and TDZ; 0.5, 1.0, 2.0 mg/L, respectively) and an auxin (IAA; 0.0, 0.5, 1.0, 2.0 mg/L) were determined. The combination (1:1, v/v) of zeatin (1.0 mg/L) and IAA (1.0 mg/L) exhibited the highest in shoot formation rate (96%) and numbers (16 / explant), twice more than zeatin (1.0 mg/L) alone. The shoot cuttings were transferred and cultivated on the rooting media supplemented with only auxin, IBA at various concentrations. The highest root formation (8 / shoot) was achieved on the medium supplemented with 1.5 mg/L. After 4 weeks of cultivation, the plantlets with an extensive root system were transplanted in pots with a soil mixture of vermiculite and fine sand. Transferred to field, about 75% of the plantlets survived.

  • PDF

상향류식 혐기성반응조와 산발효조의 병합처리시 유기물질과 질소거동에 관한 연구 (A Study on the Behaviour of Organics and Nitrogen Using Upflow Anaerobic Reactor When Acid Fermenter is Added)

  • 오대민;이영신
    • 한국환경과학회지
    • /
    • 제18권3호
    • /
    • pp.325-331
    • /
    • 2009
  • This study was aimed to behaviour of organics and nitrogen on the upflow anaerobic reactor when a acid fermenter is added. Up flow anaerobic reactor (UAR) reaction will result which operates, COD removal efficiencies of reactor with nitrate loading rate 0.11, 0.66g/L/d were over 77%, but one with 1.0g/L/d was 73.5%. Especially, on NLR 0.11g/L/d, COD removal was 77% and nitrate removal efficiency was 93% simultaneously. The other side upflow anaerobic reactor and acid fermenter (UAR+AF) reaction will result witch operates, COD removal efficiencies of reactor with nitrate loading rate 0.11, 0.66g/L/d were over 85%, but one with 1.0g/L/d was 80%. Especially, on NLR 0.11g/L/d, COD removal was 85% and nitrate removal efficiency was 98% simultaneously. Also, without in reaction condition increase of influent nitrate concentration resulted in the linear decrease of nitrate removal efficiency and nitrate removal efficiency at influent nitrate-nitrogen 800mg/L was 50%. Alkalinity was increased theoretically by denitrification at low nitrate-N concentration, however, it was not increased theoretically at high nitrate-No 40% nitrate-N of UAR was denitrified until 70% height of reactor and 90% nitrate-N of UAR+AF was denitrified until 30% height of reactor Upflow anaerobic reactor was to occur accumulate acid, which TVA/Alkalinity is 0.3$\sim$0.47. Increase of NLR resulted increase of effluent alkalinity and TVA production

The Effects of Physicochemical Factors and Cell Density on Nitrite Transformation in a Lipid-Rich Chlorella

  • Liang, Fang;Du, Kui;Wen, Xiaobin;Luo, Liming;Geng, Yahong;Li, Yeguang
    • Journal of Microbiology and Biotechnology
    • /
    • 제25권12호
    • /
    • pp.2116-2124
    • /
    • 2015
  • To understand the effects of physicochemical factors on nitrite transformation by microalgae, a lipid-rich Chlorella with high nitrite tolerance was cultured with 8 mmol/l sodium nitrite as sole nitrogen source under different conditions. The results showed that nitrite transformation was mainly dependent on the metabolic activities of algal cells rather than oxidation of nitrite by dissolved oxygen. Light intensity, temperature, pH, NaHCO3 concentrations, and initial cell densities had significant effects on the rate of nitrite transformation. Single-factor experiments revealed that the optimum conditions for nitrite transformation were light intensity: 300 μmol/m2/s; temperature: 30℃ pH: 7-8; NaHCO3 concentration: 2.0 g/l; and initial cell density: 0.15 g/l; and the highest nitrite transformation rate of 1.36 mmol/l/d was achieved. There was a positive correlation between nitrite transformation rate and the growth of Chlorella. The relationship between nitrite transformation rate (mg/l/d) and biomass productivity (g/l/d) could be described by the regression equation y = 61.3x (R2 = 0.9665), meaning that 61.3 mg N element was assimilated by 1.0 g dry biomass on average, which indicated that the nitrite transformation is a process of consuming nitrite as nitrogen source by Chlorella. The results demonstrated that the Chlorella suspension was able to assimilate nitrite efficiently, which implied the feasibility of using flue gas for mass production of Chlorella without preliminary removal of NOX.

Peptostreptococcus productus를 이용한 산업체 부생가스로부터 아세테이트 생산 (Production of Acetate from Waste Gas using Peptostreptococcus productus)

  • 강환구;전희진
    • KSBB Journal
    • /
    • 제15권2호
    • /
    • pp.188-194
    • /
    • 2000
  • 본 연구에서는 P. productus를 이용하여 체계적인 CO로부터 아세테이트 전환방법 최적화 연구를 수행하였다. 먼저 CO 소비속도에 대한 kinetic model과 그에 따른 여러 가지 상수 값을 계산하여 Vmax와 Km은 각각 39.3 mmol/L-hr-O.D., 0.578 atm임을 알 수 있었으며 또한 고농도 구간에서 CO의 저해상수 KSI는 0.792 atm이었고 Smax는 0.677 atm 이었다. 질소원인 YP의 농도에 따른 아세테이트 생산 정도는 YP 농도가 증가할수록 세포의 성장과 생성된 아세테이트의 양이 증가하여 YP 3%의 경우 O.D. 1.14에서 약 6g/L의 아세테이트를 생성함을 알 수 있었다. 그러나 아세테이트 생성속도는 YP 농도 2%와 3%에서 최대값이 0.11 g/L.hr.O.D로 비슷하였다. P. productus를 이용해 아세테이트 생성을 최적화 하기 위한 초기 pH 실험의 결과 pH 6, 7 그리고 8의 경우는 O.D. 약 0.7에서 3 g/L 아세테이트를 생성하여 거의 비슷한 양상을 보였다. 또한 P. productus의 아세테이트 생성 최적 온도는 $37^{\circ}C$임을 확인하였다. 기상과 액상의 접촉 표면적의 한계에 의한 물질전달문제의 해결을 위하여 5L 발효기에서 고농도 아세테이트 생성실험을 수행하였다. 균주성장의 경우 O.D. 약 1.4 까지 성장하였다. 아세테이트의 경우 접종초기 낮은 생성속도로 생성되다가 60시간 이후 활발한 생성을 보여 약 21g/L를 생산하였다. 이때의 최대 아세테이트 생성속도는 0.48 g acetate/L.hr.O.D 이었고 최대 CO 소비속도는 26.4 mmole CO/L.hr.O.D. 이었다. 이 수치는 bottle 의 경우 0.11 g acetate/L.hr.O.D에 비하여 4배이상 증가한 값이고 생성량에 있어서도 약 4배가 증가하였다. P. productus가 이산화탄소와 수소로부터 아세테이트를 만드는 것으로 확인되는바 이산화탄소와 수소를 이용한 균주성장 정도와 아세테이트 생성량을 확인하는 실험을 수행하였다. 30%와 20% CO2 거기에 H2를 각각 10%, 20% 주입한 경우를 비교하였는데 각 경우 모두 비슷하게 O.D. 0.5 정도에서 약 2g/L의 아세테이트를 생성하였다. 이상의 연구를 통하여 CO를 이용한 CSTR 실험시 pH 조절과 배양중 질소원등 배지의 추가 공급, 그리고 CO 머무름 시간, 교반속도의 물질전달에 영햐을 주는 요인들을 적절히 조절할 경우 생물학적 아세테이트 생성공정은 경제적으로 충분한 가치가 있을 것으로 기대되어진다.

  • PDF