• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2017

The Down-the-Hole hammer is one of the pneumatic drill equipment used for grinding, drilling, and mining. One the advantages of which is that a reduction work efficiency at deep site are relatively small compared to other drilling methods. Due to the large vibration in the underground area, it is difficult to measure the performance of the hammer, and hammer testing requires substantial production cost and operating expenses so research on the development of the hammer is insufficient. Therefore, this study has developed a dynamic simulation model that apprehends the operating principles of an 8-inch DTH hammer and calculates performance data such as performance impact force, piston speed, and BPM. By using the simulation model, design factors related to strike force and BPM were selected, and the influence of each design factors on performance was analyzed through ANOVA analysis. As a result, be the most important for BPM and the strike force are position of upper port that push the piston in the direction of the bit and in BPM, the size of the empty space between the bits and the piston is the second most important design factor.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.63-69
• /
• 2013

Since most merchant vessels are mainly influenced by the added resistance in an actual sea, they could be navigated more efficiently if this added resistance could be precisely predicted and then effectively reduced. In this paper, we have computed the effective horsepower based on the resistance performance in still water and then calculated the added resistance in regular wave in order to estimate a ship's propulsion performance on a voyage. Firstly, we have performed experiments using a model of KCS in a circulating water channel to estimate the flow characteristics around a container ship and the ship's resistance in still water. Then we have calculated the motion response function in regular wave as well as the values for the increase in resistance, and evaluated the ship's motion performance in waves according to the calculated response function. It was found that the resistance in waves increased because the ship's motion response value became larger as the ship's speed increased in the case of head sea. The effect of the added resistance could be reduced by maneuvering the ship to the encounter angle of $120^{\circ}$ in areas of long wavelengths and to head sea in areas of short wavelengths.

• Journal of Navigation and Port Research
• /
• v.39 no.5
• /
• pp.377-384
• /
• 2015

The interpolation of missing AIS data can be used for recovering the lost data of a ship's state which is then able to produce useful information for VTS stations or other ships. Previous research has introduced some interpolating methods however there are some problems with regard to missing AIS data. This paper proposes one new method which includes linear interpolation, cubic Hermit interpolation and an identification mechanism to overcome some of those limitations, first AIS data regarding ship position, COG, SOG and HDG is divided into separate time series, then the characteristic of the missing data is investigated into through using an identification mechanism, an appropriate interpolation is selected to fit all the time series which matches the characteristics. Numerical experiments are carried out using real AIS data to validate the algorithm of this approach and the results are compared with the previous method, after which the actual missing area is suggested to be interpolated by the proposed method. The interpolation results show this approach can be applied well in practice.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.321-327
• /
• 2013

As the market of express delivery services expands rapidly, delivery service companies are exposed to severe competition. As a result of the surplus of delivery companies, they are struggling with remaining competitive at a reasonable price with appropriate level of customer satisfaction. To cope with competition pressures, a strategic alliance is suggested as an effective solution to the challenges faced by small and medium enterprises (SMEs) in express delivery services. Therefore, this study suggests a combined optimization and simulation approach to the reconfiguration of an express delivery service network for strategic alliance with respect to strategy partnership of closing/keeping service centers among companies involved and adjustments of their cutoff times. An illustrative numerical example is presented to demonstrate the practicality and efficiency of the approach.

• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.1019-1025
• /
• 2004

Pressure variation is one of the major sources on noise emission in the axial type oil piston pumps. Therefore, it is necessary that the pressure variation characteristics of the oil hydraulic piston pumps be clarified to reduce the pump noise. Pressure variations in a cylinder at the discharge region and the pump noise were simultaneously measured with discharge pressures and rotational speeds during the pump working. To investigate the effects of the pre-compression and the V-notch in the valve plate, we used the three types of valve plates. In this research, it is clear that the pressure variation characteristics of axial type oil piston pumps is deeply related to the pre-compression and to the V-notch design in valve plate. Therefore, we could reduce the pump noise by using the appropriate pre-compression angle and the notch design that are between the suction port and the discharge port in valve plate.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.263-264
• /
• 2018

The quality of service provided by Vessel Traffic Services depends on the tasks characteristics and the work environment of Vessel Traffic Service operators. In this paper, the working conditions of Vessel Traffic Service operators are analyzed in order to propose methods to improve the working environment of Vessel Traffic Services and to provide high quality service through them. The questionnaire survey was conducted for Vessel Traffic Service operators working at 20 Vessel Traffic Service centers. It is expected that it might be used as the basic data for improvement of work environment and organization of Vessel Traffic Service center in the future.

• Journal of Navigation and Port Research
• /
• v.36 no.7
• /
• pp.545-552
• /
• 2012

Domestic marina facilities today consist mostly of composite-type marinas with particular spatial composition characteristics, due to the regulatory restrictions that keep their development in the public sector and the tepid growth of marine leisure-sports. To develop a marina club design appropriate for domestic conditions, this study establishes space program standards for designing Korean marinas based on a case analysis of existing marina clubs and a survey of floating marina clubs. It is possible for a current composite-type Korean marina club to have a spatial composition of 16~18% for marina-exclusive facility (mFA), 47~49% for commercial facility (cFA), 27~30% for public space (pFA) and 5~8% for management space (emFA). With this composition as a basis, space program estimation of a Korean marina club can be done through the process of estimating in order the marina-exclusive facility area, the floor area by each space and the total floor area, the first floor area, the deck area and the pontoon area. Since the space program established in this study can be utilized as a tool for designing a Korean marina club, it is expected to be helpful in designing marina clubs in the future.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.443-450
• /
• 2014

The objective of this study is to examine the nonlinear fluid characteristics near and inside a moonpool in various sea conditions. We estimate the flow of the free surface in a moonpool taking into account the viscosity effect and the hydrodynamic forces that affects a moonpool and hull through CFD calculations. The comparison of horizontal forces per wave length shows that the hydrodynamic force is greater for the long wave length than short wave length, and the greatest hydrodynamic force acts on the moonpool when the wave length is equal to the ship's length. The horizontal force decreases as the wave amplitude decreases, and the hydrodynamic force acting on the moonpool in ${\lambda}=LBP$ is 10 times that in ${\lambda}=LBP/3$. The free surface demonstrates the piston mode, in which it oscillates up and down while remaining essentially flat, and the rise of the free surface level increases as the wave length increases. We can assume that the hydrodynamic force acting on the moonpool increases owing to the effect of a strong vortex for ${\lambda}=LBP$ and owing to the rise of the free surface level for ${\lambda}=LBP{\times}2$.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.2
• /
• pp.43-55
• /
• 1988

The amount of cargoes and fishery production have increased continuously during the last decade due to the great growth of the Korean economy. These increasements have made our coastal traffic congested, and the future coastal traffic is also expected to increase considerably. The increased traffic can be a cause of large sea pollution as well a s greater sea casualties us as properties and human lives, which could result in a big national loss. In order to prevent the sea casualties and promote the safety of coastal traffic, the Vessel Traffic Management System (VTMS) along the Korean coastal waterway is inevitably introduced. But, the precise evaluation is necessary required prior to the implementation of VTMS because this system necessitates a huge amount of budgets. This paper aims to propose the model of evaluation process, but the evaluation as to the urgency of establishment is not only very complicated and fuzzy but also affected by the subjectivity of human. Therefore, fuzzy integral is adopted as the mathematical model of evaluation in which decision-maker can intervence by making decision considering the calculated membership-function. Four aspects, namely, the frequency of sea-casualities, the traffic volume, the frequency fuzzy day, and the complexity of waterway are selected as the item of evaluation, and the fuzzy measure are applied to the evaluation of 8 candidated regions such as the adjacent area to the port Inchen, Kunsan, Mokpo, Wando, Yosu, Pusan, Pohang, Donghae. As a result of evaluation, the priority as to the candidated regions is obtained, and the following prior execution regions, namely, the adjacent area to the port Pusan, Yosu, Mokpo & Wando are selected by considering the present situation, but, in the long run, the VTMS should be executed in the whole coast of the nation, through the cost-effectiveness analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.172-182
• /
• 2020

In order to offer specific information needed to assist in operation of a ship with same type rudder through evaluating the maneuverability of training ship A-Ra with flapped rudder, sea trials based full scale for turning test, zig-zag test with rudder angle 10° and 20°, and spiral test at service condition were carried out on starboard and port sides around Jeju Island according to the standards of maneuverability of IMO. As a result, the angular velocity of port turn was higher than that of starboard turn. Therefore, the size of turning circle was longer on the starboard side. In addition, variation of the transfer due to various factors was more stable than those of the others. In the Z-test results, the mean of 1st and 2nd overshoot angles were 9.8°, 6.3° and 15.3°, 9.2° respectively when the port and starboard was 10°; the 1st overshoot angle were 18°, 13.7° when using 20°. Her maneuverability index T' and K' can be easily determined by using a computer with the data obtained from Z-test where K' and T' are dimensionless constants representing turning ability and responsiveness to the helm, respectively. In the Z-test under flap rudder angle 10°, the obtained K' value covered the range of 2.37-2.87 and T' was 1.74-3.45. Under the flap rudder angle 20°, K' and T' value showed 1.43-1.63, 1.0-1.73, respectively. In the spiral test, the loop width was unstable at +0.3° and -0.5°-0.9° around the midship of flap rudder. As a result, course stability was comparatively good. From the sea trial results, training ship ARA met the present criterion in the standards of maneuverability of IMO.