• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.33-39
• /
• 2013

In this paper, X/Ku band waveguide diplexers with H-plane T-junction for satellite communication systems is proposed and its characteristics is cinfirmed. Two frequency bands such as X(7.25 ~ 8.4 GHz) and Ku(12.25 ~ 14.5 GHz) can be separated by the proposed waveguide diplexers. A diplexers is normally including low pass filter, high pass filter and junction waveguide. To simplify the structure of the proposed diplexers, the proposed waveguide diplexers is using impedance matching technique on H-plane of the high pass filter without low pass filter. To use vertical and horizontal polarization, the proposed diplexers with orthomode transducer(OMT) characteristics is also designed. Therefore, it is confirmed that the proposed waveguide diplexers can be used as dual-band and dual-polarization diplexers for satellite communication feed systems.

• Electrical & Electronic Materials
• /
• v.23 no.11
• /
• pp.16-27
• /
• 2010

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.685-694
• /
• 2018

In this paper, we designed and fabricated the frequency mixer, which is the core parts of high frequency head in Ku-band tracking radar. To overcome the problem of single-ended and single-balanced resistive structure, we designed the fine-line structure with balanced mixer, to generate IF signal without distortion in L-band, after receiving the RF signal of the Ku-band. The prototype mixer showed a Noise Figure Max of 6.823dB, Gain of 4.1598~4.676dB and Band Pass of 61MHz in 5 Ku-band samples frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1993

In this paper, an offset paraboloidal reflector antenna satisfied efficiency of over 60% and sidelobe envelope line of 29-25$log\theta$ was designed and manufactured for Ku-band VSAT(Very Small Aperture Terminal) antenna. The radiation patterns of experimental antenna were computed by applying the series expansion method using the Zernike polynomials. The measured patterns are in good agreement with the computed results. The Gain, efficiency, and sidelobe envelop line fairly well satisfy the design specifications except first sidelobe level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3201-3206
• /
• 2012

In this paper, the simplified design methodology for rotation of polarization plane using a square waveguide is proposed. In order to optimize the characteristics of $180^{\circ}$ polarizer operating from 14.3GHz to 14.8GHz in Ku-band, the modified mode matching method and piecewise power tower interpolation are applied to the polarizer design. The optimized results show that the frequency bandwidth in VSWR<2 has covered 500MHz in the Ku-band and phase difference between two orthogonal modes $TE_{10}$and $TE_{01}$ is $180^{\circ}{\pm}1^{\circ}$ in the range of 14.3GHz~14.8GHz. The cross polarization loss has obtained below 40dB and the insertion loss has 0.1dB in the passband. Therefore, the proposed polarizer is suitable for practical Ku-band system requiring the low VSWR and compact size.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.217-221
• /
• 2003

In this work, we used a novel RF-CSP to develop a broadband amplifier MMIC, including all the matching and biasing components, for Ku and K band applications. By utilizing an ACF for the RF-CSP, the fabrication process for the packaged amplifier MMIC could be simplified and made cost effective. STO (SrTiO$_3$) capacitors were employed to integrate the DC biasing components on the MMIC. A pre-matching technique was used for the gate input and drain output of the FETs to achieve a broadband design for the amplifier MMIC. The amplifier CSP MMIC exhibited good RF performance (Gain of 12.5$\pm$1.5 dB, return loss less than -6 dB, PldB of 18.5$\pm$1.5 dBm) over a wide frequency range. This work is the first report of a fully integrated CSP amplifier MMIC successfully operating in the Ku/K band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.636-644
• /
• 1999

Experimental and simulation results are presented on the Aperture-Coupled microstrip patch antennal with U-shaped slot. Experiment and simulation results include impedance bandwidth, copolar and crosspolar-pattern characteristics and gain measurements. Simulation results show the advantages of U-slotted patch antenna comparing with the normal patch antenna. More than 35% impedance bandwidth is obtained with reasonably restricted cross-polar radiation pattern. The U-slotted radiation element fed by aperture-coupling method can be more easily extended to array structure, compared with that fed by coaxial cable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1802-1811
• /
• 1994

In this paper, the corrugated horn antenna used in the reflector feed horn of satellite is analyzed using the modal expansion method. The modal expansion method is represented by the summations of modals at each point so the exact prediction of field and phase patterns can be obtained. The least number of iterations to compute field patterns is proposed. By using this number. calculation of accurate near and far field patterns without comsuming a lot of computational effort is available. Three kinds of corrugated horn antenna is designed to verify the method and experimented. The VSWR of designed frequency is from 1.04 to 1.1. The input impedance is nearly matched to $50\Omega$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1138-1147
• /
• 1999

In this paper, two types of $2\times2$ Rx/Tx microstrip patch antenna are proposed to implement Ku-band satellite communications. The single-fed dual resonance patch antenna as the first type derives perpendicular polarizations at two resonant frequencies from a single patch radiator, using aperture coupling via a bended single-feeding line and a cross-shaped slot. The double-fed dual resonance patch antenna as the second type implements dual resonance with mutually orthogonal polarizations by mixing the two feeding mechanisms of the microstrip line and the aperture coupling. Especially, in the double-fed dual resonance antenna case, air-gap is introduced to broaden the bandwidth. Through measurement, each of the two types of antenna was verified to function properly both Rx and Tx. The double-fed dual resonance antenna shows excellent performance in the bandwidth and the crosspolarization characteristics.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.43-49
• /
• 1997

Generally, echo cancelers of a TV conference system or a audio conference system are to carry out a real time processing in the case of the closed room having long reverberation time because the system requires much time to modify filter coefficients to environmental changes. Therefore this paper proposes a new subband adaptive filtering method using polyphase filter banks of MPEG(Moving Picture Experts Group) audio system to solve the problems. This method divides signal spectra of input and output into several frequency bands, and each band is adaptively filtered by using ES-NLMS (Exponential Step-Normalized Least Mean Square) algorithm. The optimal number of subband is determined by computational simulations. According to the results of simulation, ERLE of the subband model is 2dB smaller than general full band, calculation rate's of the subband model is decreased about 88%.