• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.882-887
• /
• 2004

The new magnetic porcelain materials have been studied by mixing magnetic St-ferrite powders with traditional porcelain materials before forming process. For the maintenance of magnetic characteristics after glaze firing process, the Sr-ferrite grains with the size of 1∼2 ${\mu}{\textrm}{m}$ were agglomerated as the isotropic granules with the size of 0.5∼2 mm. The high characteristics of magnetic porcelain materials were achieved at the following conditions; isotropic Sr-ferrite granules of 30 wt%, granule size of 1.4∼2 mm, and glaze firing temperature of $1250^{\circ}C$ in air The magnetic porcelain materials indicated the high magnetic properties, such as the remanent flux density of 240 G, the intrinsic coercivity of 3910 Oe, and the surface flux density of 178 G. The extraction properties of the magnetic tea cups were high compared to that of the traditional tea cups.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.600-604
• /
• 2008

Although titanium-ceramic systems have gained substantial interests in dental prosthetic field, bonding problem between porcelain and titanium has not been solved. Main obstacle in titanium-porcelain bonding is excessive oxidation of titanium during porcelain firing. The effects of several coating materials on the bonding strength of titanium-porcelain system were investigated in this study. RF sputtering and electroplating of platinum significantly increased the bonding strength of porcelain-titanium specimen. However, coatings of Ni-Au, Ir, and ceramics(zirconia and hydroxyapatite) did not showed a significant effect on bonding strength. Platinum might be a promising material for the protective layer of excessive oxidation of titanium during porcelain firing, resulting in increase in the bonding strength.

• 대한심미치과학회지
• /
• 제10권2호
• /
• pp.15-20
• /
• 2001

The spaced dentition is a common clinical finding. The careful analysis of clinically spaced dentition is a necessity for effective treatment planning. Spaced dentition often exists in the presence of intact teeth. Therefore, special care should be taken in order to obtain the most successful esthetic effect and to prevent overtreatment as well. The aesthetic restorative dental treatment using the porcelain laminate veneers is getting more popular than the complex orthodontic treatment, and prosthetic solutions that require sacrifice of sound tooth structure. The physical strength of porcelain laminate veneers is not as good as porcelain fused metal crowns, and more researches are needed in the field of bonding between composite cement and porcelain laminate veneer. However, the esthetic results from this unprepared porcelain laminate veneers were satisfactory with Authentic (Ceramay, Germany) pressable ceramic technique and resin cement (Rely X Veneer, 3M). This article deals with 2 cases of unprepared porcelain laminate veneers on anterior teeth.

• 대한치과기공학회지
• /
• 제1권1호
• /
• pp.11-13
• /
• 1979

이런 기법을 통해 porcelain의 변색이 합금에 포함된 silver의 탓이라고 충분히 이해할 수는 없을 것이며 변색을 완전히 제거할 수 있는 기술적인 방법도 없다. 단지 그것을 조절할 수는 있다는 것이다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.17-40
• /
• 2000

Resin cements are used for cementing indirect esthetic restorations such as resin or porcelain inlays. Because of its limitations in curing of purely light cured resin cements due to attenuation of the curing light by intervening materials, dual cured resin cements are recommended for cementing restorations. The physical properties of resin cements are greatly influenced by the extent to which a resin cures and the degree of cure is an important factor in the success of the inlay. The purpose of this study was to evaluate the influence of porcelain thickness and exposure time on the polymerization of resin cements by measuring the microhardness and the degree of conversion, to investigate the nature of the correlation between two methods mentioned above, and to determine the exposure time needed to harden resin cements through various thickness of porcelain. The degree of resin cure was evaluated by the measurements of microhardness [Vickers Hardness Number(VHN)] and degree of conversion(DC), as determined by Fourier Transform Infrared Spectroscopy(FTIR) on one light cured composite resin [Z-100(Z)] and three dual cured resin cements [Duo cement(D), 3M Resin cement(R), and Dual cement(DA)] which were cured under porcelain discs thickness of 0mm, 1mm, 2mm, 3mm with light exposure time of 40sec, 80sec, 120sec, and regression analysis was performed to determine the correlation between VHN and DC. In addition, to determine the exposure time needed to harden resin cements under various thickness of porcelain discs, the changes of the intensity of light attenuated by 1mm, 2mm, and 3mm thickness of porcelain discs were measured using the curing radiometer. The results were obtained as follows ; 1. The values of microhardness and the degree of conversion of resin cements without intervening porcelain discs were 31~109VHN and 51~63%, respectively. In the microhardness Z was the highest, followed by R, D, DA. In the degree of conversion, D and DA was significantly greater than Z and R(p<0.05). 2. The microhardness and the degree of conversion of the resin cements decreased with increasing thickness of porcelain discs, and increased with increasing exposure time, D and R showed great variation with inlay thickness and exposure time, whereas, DA showed a little variation. 3. The intensity of light through 1mm, 2mm, and 3mm porcelain inlays decreased by 0.43, 0.25, and 0.14 times compared to direct illumination, and the respective needed exposure times are 53 sec, 70 sec, and 93 sec. In D and R, 40 sec of light irradiation through 2mm porcelain disc and 80 sec of light irradiation through 3mm porcelain disc were not enough to complete curing. 4. The microhardness and the degree of conversion of the resin cements showed a positive correlationship(R=0.791~0.965) in the order of R, D, Z, DA. As the thickness of porcelain discs increased, the decreasing pattern of microhardness was different from that of the degree of conversion, however.

• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.195-204
• /
• 2008

치아 우식증과 침식증의 진단과 본 연구는 교정용 밴드 사용의 대안으로 제시된 직접 부착 술식이 보철 치료를 받은 치아상에서도 적절한 결합 강도를 갖으면서 임상적으로 유용하게 사용될 수 있는지를 평가하고, 불산과 포세린 전처리제의 사용 여부에 따른 결합 강도와 접착 파절 양상의 차이에 대해 알아보고자 시행하였다. 사람의 상하악 소구치 치관 20개를 대조군으로, 소구치의 협면을 복제한 포세린 치관 80개를 실험군으로 나눈 후, 대조군은 37% 인산으로 산부식한 후 Transbond $XT^{(R)}$를 이용하여 금속 브라켓을 접착하였고, 실험군들은 모두 포세린 치관에 통상적으로 sandblasting 처리를 하되, 9.6% 불산으로 4분간 부식처리를 함께 한 군, 포세린 전처리제를 적용한 군, 마지막으로 sandblasting과 불산 그리고 포세린 전처리제를 모두 적용한 군으로 20개씩 나눈 후 금속 브라켓을 접착하였다. 각 군간 전단 결합 강도와 접착 파절 양상을 비교하여 관찰한 결과, 포세린 치관에 금속 브라켓을 접착할 시, 기존의 비심미적인 밴드를 사용하지 않더라도 sandblasting과 불산 그리고 포세린 전처리제를 이용한 직접 부착 술식으로 임상적으로 유용하게 사용될 수 있음을 알 수 있었다.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.869-902
• /
• 1996

Flexion of a metal/ceramic fixed partial denture(EPD) frameworks under function can cause fracture of porcelain or deterioration of the cement seal. This study evaluated the flexion characteristics of three-unit mandibular FPD frameworks, repacing the second pre-molar under compressive load(200g, 400g). Testing was accompished with real-time holographic interferometry, using 6 porcelain fused-to metal frameworks. Tested alloys were non-precious alloy(Heracles, Holland), semi-precious alloy(Degudent U, Germany) and precious alloy(Degudent H, Germany). Changes of the fringe patterns according to the heat treatment(porcelain firing cycle), various loads(200g, 400g), occlusal forms(occlusal porcelain veneering, facial porcelain veneering), various alloys and post-soldering units were compared. Dental study model(Nissan dental products, Inc. D51DP-500A, Japan) and six 3-unit metal/ceramic fixed partial denture frameworks were used as experimental materials. 36 holograms were taken on fixed dental study model by using the 10mW He-Ne laser and real-time holographic interferometry. On the basis of this study, the following conclusions can be drawn : 1. In the frameworks for facial porcelain veneering, the semi-precious alloy framework was least deformed and precious alloy framework, non-precious alloy framework orderly before heat treatment, and the deformation was not shown great difference among three alloys after heat treatment and post-soldering. 2. In the frameworks for occlusal porcelain veneering, the precious alloy framework was greatest deformed and the deformation was not difference between semi-precious alloy framework and non-precious alloy framework before, after heat treatment, and the deformation was not shown great difference among three alloys after post soldering. 3. In the non-precious alloy frameworks for facial porcelain veneering and occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and conversely increased after post-soldering. 4. In the semi-precious alloy framework for facial porcelain veneering, the deformation was not detectable after heat treatment and increased after post-solder. And in the frame-work for occlusal porcelain veneering, the deformation was slightly decreased after heat treatment and increased after post-soldering. 5. In the precious alloy framework for facial porcelain veneering, the deformation was greatly decreased after heat treatment and increased after post-soldering, And in the framework for occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and decreased after post-soldering.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.157-162
• /
• 2006

Pressable ceramics have many applications in the field of dental industry because of their excellent esthetic, compressive strength, chemical durability. Despite these attractive characteristics, they have not been widely used since they are very brittle and extremly sensitive to porcelain. In this study, the fabrication of pressable dental porcelain ($SiO_2-Al_2O_3-K_2O-Na_2O$) as a function of contents of $Al_2O_3,\;BaO\;and\;ZrO_2$ were investigated. And then compressive strength, Vickers hardness, density and thermal expansion coefficient (TEC) tests have been carried out to evaluate properties of pressable dental porcelain fabricated. The property of pressable dental porcelain fabricated by adding of 15%$Al_2O_3$ and 2%BaO contents was closely approximated to that of natural tooth.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.127-133
• /
• 2013

Porcelain with high thermal shock resistance was successfully fabricated by a lithium solution infiltration method with a lithium hydroxide solution. Lithium hydroxide solutions having various lithium concentrations were infiltrated into pre-sintered porcelain bodies. The porcelain sample infiltrated by the 9 wt% lithium solution and heat treated at $1250^{\circ}C$ for 1 h showed a low thermal expansion coefficient of $1.0{\times}10^{-6}/^{\circ}C$ with excellent thermal shock resistance. The highly thermally resistant porcelain had a well-developed ${\beta}$-spodumene phase with the general phases observed in porcelain. Furthermore, the porcelain showed a denser structure of $2.41g/cm^3$ sintering density and excellent whiteness in comparison with commercial thermally resistible porcelains. The lithium hydroxide in the samples readily reacted with moisture, and liquid phase reactants were formed during the fabrication process. In the case of an excess amount of lithium in the sample body, the lithium reactants were forced to the surface and re-crystallized at the surface, leaving large pores beneath the surface. These phenomena resulted in an irregular structure in the surface area and led to cracking in samples subjected to a thermal shock test.

• 복식
• /
• 제56권7호
• /
• pp.54-68
• /
• 2006

This study examined similarity between white porcelain models and dress silhouette of women painted in genre painting in late Joseon period, and found that gourd bottles that are one of main porcelain styles are very similar with dress silhouette of women presented in genre painting in Joseon period; that is, bottle necks of gourd bottles and women's waist, voluminous bottles and erotically full hips, the length of skirts which showed underwear dress and height of porcelain's bottom, waist panel winding slim waist and wide edge of porcelain's mouth. As images are personal mental process of potters who were not socially controlled, they used dress as an indirect means of women's bodies for the subjects of images that are obtained through direct and indirect experiences of the persons who perceive. It indicates that they intended to make their ceramic works express women's dressing style through images of porcelain's models. Such images were sensual, but not superficial. It is suggested that they were influenced by the society which considered ethical experimental mind and practicality of the governing class of that time who enjoyed it metaphorically, but not impudent.