• Research in Plant Disease
• /
• v.19 no.2
• /
• pp.108-113
• /
• 2013

Wilt damage on tomato plants caused by Ralstonia solanacearum has been increased as the areas of tomato cultivation increased during the warm seasons. Also, the tomato rootstocks used to prevent the disease occurrence are not effective in the highly prevailing regions. Therefore, bacterial wilt resistant eggplant rootstock EG203, collected from AVRDC, was tested for its effect to deter the Ralstonia solanacearum wilt disease in the greenhouses at Buyeo Tomato Experiment Station from 2003 to 2005, and at Gumi, Kyungpook province from 2009-2011. Planting of eggplant rootstock EG203 should be done three weeks before the planting of tomato scions so that they can have similar stem diameter (2.5-3.0 mm) and can be easily grafted. Both insertion and inarching grafting showed 93-96% success rates. In the greenhouse tests at Buyeo Tomato Experiment Station from 2003 to 2005, eggplant rootstock EG203-grafted tomatoes showed the disease occurrence of 4.3%. On the other hand, non-grafted or other commercial rootstock-grafted tomatoes showed disease occurrence of 58.0% and 25.0-36.7%, respectively. In the greenhouse tests at Gumi, Kyungpook province in 2009, the disease occurrence on the EG203-grafted and non-grafted tomatoes was 2-5% and 20-80%, respectively. In 2010, at Gumi, Kyungpook province, when the wilt disease occurred slightly, the tomatoes grafted with tomato rootstocks B-blocking and Chung-gang, and eggplant rootstock EG203 showed similar disease severities, but EG203-grafted tomatoes formed lately cluster, resulting in the reduction of yield compared to tomato-grafted tomatoes. In 2011, at Gumi, Kyungpook province, when the wilt disease occurred severely, the tomato rootstocks 'B-blocking' and Chung-gang and eggplant rootstock EG203-grafted tomatoes showed disease occurrences of 60-85% and 0-1%, respectively. Therefore, it was concluded that tomato rootstocks 'B-blocking' and 'Chung-gang' are more useful in the areas contaminated with low levels of pathogen and eggplant rootstock EG203 is more useful in the areas contaminated with high levels of pathogen.

• Journal of Plant Biotechnology
• /
• v.41 no.3
• /
• pp.146-158
• /
• 2014

Camelina sativa that belongs to Brassicaceae family is an emerging oilseed crop. Camelina seeds contain approximately 40% storage oils per seed dry weight, which are useful for human and animal diets and industrial applications. Microsomal delta-12 fatty acid desaturase2 (FAD2) catalyzes the conversion of oleic acid to linoleic acid. The polymorphisms of FAD2 genes are correlated with the levels of oleic acids in seed oils. Microsomal delta-12 fatty acid desaturase2 (FAD2) catalyzes the conversion of oleic acid to linoleic acid. The polymorphisms of FAD2 genes are correlated with the levels of oleic acids in seed oils. In this study, three CsFAD2 genes (CsFAD2-1, CsFAD2-2 and CsFAD2-3.1) were isolated from developing seeds of Camelina sativa (L.) cv. CAME. The nucleotide and deduced amino acid sequences of three CsFAD2 genes were compared with those from dicotyledon and monocotyledon plants including Camelina cultivars Sunesone and SRS933. Three histidine motifs (HECGH, HRRHH, and HVAHH) required for FAD activity and a hydrophobic valine or isoleucine residue, which is a SNP (single nucleotide polymorphism) marker related with enzyme activity are well conserved in three CsFAD2s. The expressions of CsFAD2-1 and CsFAD2-3.1 were ubiquitously detected in various Camelina organs, whereas the CsFAD2-2 transcripts were predominantly detected in flowers and developing seeds. The contents of oleic acids decreased, whereas the amounts of linoleic acid increased in dry seeds of transgenic fad2-2 lines expressing each CsFAD2 gene compared with fad2-2 mutant, indicating that three CsFAD2 genes are functionally active. The isolated CsFAD2 genes might be applicable in metabolic engineering of storage oils with high oleic acids in oilseed crops.

• Journal of Plant Biotechnology
• /
• v.40 no.4
• /
• pp.210-216
• /
• 2013

Efficient regeneration methods and transformation system are a priority for successful application of genetic engineering to vegetative propagated plants such as grape (Vitis labrusca L.). This research is to establish shoot regeneration system from plant explants for 'Campbell Early', 'Tamnara', 'Heukgoosul', 'Heukbosek' using two types of plant growth regulators supplemented to medium. The highest adventitious shoot regeneration rate of 5% was achieved on a medium containing of Murashige and Skoog (MS) inorganic salts and Linsmaier and Skoog (LS) vitamins, 2 mg/L of TDZ and 0.1 mg/L of IBA. Leaf tissue of 'Campbell Early', was co-cultivated with Agrobacterium strains, LBA4404 containing the vector pBI121 carrying with CaMV 35S promoter, gus gene as reporter gene and resistance to kanamycin as selective agent, the other Agrobacterium strains, GV3101 containing the vector pB7 WG2D carrying with mPAP1-D gene. mPAP1-D is a regulatory genes of the anthocyanin biosynthetic pathway. 'Campbell Early' harboring mPAP1-D gene was readily able to be selected by red color due to anthocyanin accumulation in the transformed shoot. These results might be helpful for further studies to enhance the transformation efficiency in grape.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.366-369
• /
• 2011

In this study, the contamination levels of total aerobic bacteria, E. coli, total coliform and S. aureus of seasoned dried fishes (SDF) in Korea were investigated. A total of 81 SDF samples were purchased randomly from 28 stores. Contamination range of total aerobic bacteria, total coliform and S. aureus were 150~1,700,000, 10~31,000 and 10~220 CFU/g, respectively. E. coli was detected in only one samples in the qualitative test. We have analyzed quantitatively Staphylococcal enterotoxins (SE-type A, C and D) produced by S. aureus contaminated in SDF using a TECRA kit and standard curve. The curve equation was Y = 0.1499 * X + 0.1183 and maximum amount of SEs in SDF was 0.71 ng/ml. Reduction speed of S. aureus in SDF stored at $37^{\circ}C$ was the highest among the samples stored for 8 days at different temperature of 7, 18 and $37^{\circ}C$. On the basis of the results, SDF in Korea can be contaminated by a variety of pathogenic bacteria. Therefore, precautionary measures are necessary for consumer protection, including the improvement of sanitary conditions in the processing plants in Korea.

• Journal of Arbitration Studies
• /
• v.24 no.2
• /
• pp.33-52
• /
• 2014

Although climate change is a global scale question, some concerns have been raised that principles of investment arbitration may not adequately address the domestic implementation of climate change measures. A recent ICSID investment arbitration of Vattenfall v. Germany with regard to the investor's alleged damages from the phase-out of nuclear plants is a salient climate change case. The 2005 Kyoto Protocol was made to reduce greenhouse gas emissions and it provides a number of flexible mechanisms such as Joint Implementation (JI) and Clean Development Mechanism (CDM). Implementation of the Kyoto Protocol allows dispute settlement through investor-state arbitration. Any initiation of stricter emission standards can violate the prohibition on expropriations in investment agreements, regardless of the measures created to reduce greenhouse gas emissions. The effect-based expropriation doctrine can charge changes to existing emission standards as interference with the use of property that goes against the legitimate expectation of a foreign investor. In regulatory chill, threat of investor claims against the host state may preclude the strengthening of climate change measures. Stabilization clauses also have a freezing effect on the hosting state's regulation and a new law applicable to the investment. In the fair and equitable standard, basic expectations of investors when entering into earlier carbon-intensive operations can be affected by a regulation seeking to change into a low-carbon approach. As seen in the Methanex tribunal, a non-discriminatory and public purpose of environmental protection measures should be considered as non-expropriation in the arbitral tribunal unless its decision would intentionally impede a foreign investor's investment.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2009

The greatest and major cost for cut rose production during winter seasons in Korea is cost of heating the greenhouse. A study was conducted on a cost-efficient heating system to reduce expenses of cut rose growers in times of high energy prices. An infrared heating system utilizing radiant energy has an obvious advantage over other heating methods in that the energy is first used to raise temperatures of plants and other objects and subsequently that of the atmosphere, resulting in faster reaching to desired plant temperatures at a reduced heating cost. In this study the heating effect and heating cost saving of a nano-carbon fiber infrared heating system (NCFIHS) installed in cut rose greenhouses in Gimhae, Gyeongnam Province were analyzed comparatively. In addition growth, quality, and vase life of 'Orange Fresh' roses grown in greenhouses heated by NCFIHS against those grown in greenhouses heated by so called an electrical heating system. In greenhouses with a NCFlHS with a set point air temperature of $20^{\circ}C$, plant temperature was maintained at $1{\sim}2^{\circ}C$ higher than the air temperature, and temperatures of growing bed surface and root zone were maintained at $17{\sim}19^{\circ}C$ throughout cold winter nights. The cost for heating in NCFIHS was about 25 and 51% of that of an electrical heating system and a hot water heating system heated by petroleum, respectively. Growth of roses harvested in greenhouses with a NCFIHS was similar to those grown in greenhouses with an electrical heating system. However, cut roses with more intense petal and leaf colors and a longer vase life (fresh weight and amount of water uptake) were harvested in greenhouses with a NCFIHS as compared to those harvested in greenhouses with an electrical heating system.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.87-90
• /
• 2013

The average annual and winter ambient air temperatures in Korea have risen by $0.7^{\circ}C$ and $1.4^{\circ}C$, respectively, during the last 30 years. Due to climate change, the occurrence of abnormal weather conditions has become more frequent, causing damage to vegetable crops grown in Korea. Hot pepper, chinese cabbage and radish, the three most popular vegetables in Korea, are produced more in the field than in the greenhouse. It has been a trend that the time for field transplanting of seedlings is getting earlier and earlier as the spring temperatures keep rising. Seedlings transplanted too early in the spring take a longer time to resume the normal growth, because they are exposed to suboptimal temperature conditions. This experiment was carried out to figure out the change of cellular tissue of chinese cabbage under the condition of low temperature to provide the information regarding the coming climatic change, on the performance of 'Chunkwang' chinese cabbage during the spring growing season. In our study, plant height, number of leaf, chlorophyll and leaf area was lower at the open field cultivation than heating house treatment after transplanting 50 days. Especially in fresh weight, compared with heating treatment, open field and not heated treatment were notably low with the 1/3 level. Of damage symptoms due to low temperature cabbage leaves about 10 sheets when $-3.0^{\circ}C$ conditions in chinese cabbage was a little bit of water soaking symptoms on the leaves. $-7.4^{\circ}C$ under increasingly severe water soaking symptoms of leaf turns yellow was dry. Microscopy results showed symptoms of $-3.0^{\circ}C$ when the mesophyll cell of palisade tissue and spongy tissue collapse, $-7.4^{\circ}C$ palisade tissue and spongy tissue was completely collapsed. The result of this study suggests that the growers should be cautioned not to transplant their chinese cabbage seedlings too early into the field, and should be re-transplanting or transplanting other plants if chinese cabbage are exposed to suboptimal temperature conditions ($-3.0^{\circ}C$ or $-7.4^{\circ}C$).

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.182-187
• /
• 2013

In closed plant production system like plant factory, changes in environmental factors should be identified for conducting efficient environmental control as well as predicting energy consumption. Since high relative humidity (RH) is essential for crop production in the plant factory, transpiration is closely related with RH and should be quantified. In this study, four varieties of lettuces (Lactuca sativa L.) were grown in a plant factory, and the leaf areas and transpiration rates of the plants according to DAT (day after transplanting) were measured. The coefficients of the simplified Penman-Monteith equation were calibrated in order to calculate the transpiration rate in the plant factory and the total amount of transpiration during cultivation period was predicted by simulation. The following model was used: $E_d=a*(1-e^{-k*LAI})*RAD_{in}+b*LAI*VPD_d$ (at daytime) and $E_n=b*LAI*VPD_n$ (at nighttime) for estimating transpiration of the lettuce in the plant factory. Leaf area and transpiration rate increased with DAT as exponential growth. Proportional relationship was obtained between leaf area and transpiration rate. Total amounts of transpiration of lettuces grown in plant factory could be obtained by the models with high $r^2$ values. The results indicated the simplified Penman-Monteith equation could be used to predict water requirements as well as heating and cooling loads required in plant factory system.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.406-413
• /
• 2020

This study was conducted to find out optimum fruiting node order, pinching node order, and harvesting time in hydroponics using coir substrates to produce high quality melon (Cucumis melo L.) fruit. Three plants per coir slab (100 × 20 × 10 cm) were planted for each treatment. Yamazaki standard nutrient solutions for melon were supplied with 1.8, 2.0, and 2.3 dS·m^-1 at the early, middle (fruit enlargement step), and late growth stages, respectively. Two cultivars of 'PMR Dalgona' and 'Earl's Aibi' were used for fruiting node order and pinching node order experiments. Fruiting node treatments were conducted three replications (8-10 ^th, 11-13 ^th, and 14-15 ^th nodes) and pinching node treatments treated with three replications (18 ^th, 21 ^th, and 24 ^th nodes). Two cultivars of 'PMR Dalgona' and 'Earl's Crown' were used for fruit harvesting time experiment and treated with in four replications (45, 50, 55, and 60 days after fruiting). In growth characteristics, the leaf width and leaf area of 'PMR Dalgona' were the greatest 28.2 cm and 10,845 ㎠. Respectively, 11-13 ^th fruiting nodes or more. The node length of 'Earl's Aibi' was the longest by 147.6 cm at 11-13 ^th fruiting nodes. For fruit quality characteristics, the fruit weight of 'Earl's Aibi' at 11-13 ^th fruiting node fruiting was the greatest by 2.0 kg. The soluble solids content (SSC) of 'PMR Dalgona' was the highest by 14.5 °Brix at 8-10 ^th nodes in fruiting node orders and 14.5 °Brix at the 24 ^th pinching node order, respectively with significant difference. The SSC tends to increase in the same for both cultivars of 'PMR Dalgona' and 'Earl's Aibi' as the position of fruiting node was lower. The SSC and fruit weight of melon harvested at 55-60 days after fruiting was the best. From the results of this study, most of SSC tends to increase in the lower position of fruiting node order and the higher pinching node order, whereas the fruit weight shows a tendency of increasing with higher fruiting node. In addition, the SSC of fruit increased as the number of days after fruiting increased, and further research is needed for more various cultivars. In melon hydroponics using coir substrates, it is needed to figure out the characteristics of each cultivar to determine optimum fruiting node order, pinching node order, and fruit harvest time.

• Microbiology and Biotechnology Letters
• /
• v.13 no.4
• /
• pp.409-415
• /
• 1985

This study has been carried out in order to investigate the bacterial quality of fish meat paste products and the characteristics of isolated thermodurics from the products. Twenty samples of crab-flavored fish stick (Kematsal), 23 samples of plate fish meat paste (Panomuk, Kamaboko), 5 samples of fried fish meat paste (Tigimomuk), 2 samples of roasted fish meat paste (Puduromuk, Chikuwa), 20 samples of fish sausage were collected from processing plants and supermarkets in Pusan, Korea during the period from May to October in 1984. The results obtained are as follows. Amont the samples collected from supermarkets, roasted fish meat paste and fried fish meat paste marked hish counts in coliforms and fungi while very low in the samples of crab-flavored fish stick and plate fish meat paste. Salmonella was not detected in all the samples examined and Staphylococcus aureus was detected only in fried fish meat paste, Thermoduric bacteria were detected less than 10$^2$/g in the samples of crab-flavored fish stick and plate fish meat paste, which might come from subsidiary materials such as starch and seasonings. Among the isolated bacteria, distribution of the proteolytics were more than 87％ and the lipolytics were less than 20％. Gram positive bacteria was more than 70％ in crab-flavored fish stick and plate fish meat paste, 47.3％ in fried fish meat paste. And rod in shape was almost more than 90％ in all the samples. The most heat resistant bacterium isolated from the samples was identified as a Bacillus licheniformis(named B. licheniformis CR-11). The strain showed strong proteolytic activity and also grew well at above 2$0^{\circ}C$. The growth rate and generation time of CR-11 strain were 0.31 hr$^{-1}$ , 2.24 hr at 2$0^{\circ}C$, 0.64 hr$^{-1}$ , 1.09 hr at 3$0^{\circ}C$ and 0.78 hr$^{-1}$ , 0.89 hr at 35$^{\circ}C$. Heat resistance value of the spores of CR-11 strain suspended in phosphate buffer solution was D$_{85}$ $^{\circ}C$=41.9 min, D$_{90}$ $^{\circ}C$=27.9 min, D$_{95}$ $^{\circ}C$=10.2 min, D$_{100}$ $^{\circ}C$=4.3 min (Z=13.8$^{\circ}C$)