• The Korean Journal of Pharmacology
• /
• v.25 no.1
• /
• pp.53-58
• /
• 1989

For several years, we investigated the pharmacological action of several substances isolated from Buxus microphylla var koreana Nakai, which had been used as folk remedies of malaria and venereal disease. Cyclobuxine $D(C_{25}H_{42}ON_2)$, a steroidal alkaloid, exerted an antiinflammatory action, hypotensive and bradycardic effects in rats. In the present study, we isolated alkaloid from the acetone-insoluble fraction of the strong bases of this plants. This alkaloid $(C_{25}H_{38}ON_2)$ was identified as a steroidal alkaloid contained a cyclopropane ring by physical and chemical methods. It is a derivative of cyclobuxine D and named cyclobuxine E. We examined the effect of cyclobuxine E on the contractile response induced by acetylcholine and two distinct types of potassium-activated calcium channels in an intestinal smooth muscle of the rat. Cyclobuxine E inhibited significantly the Ach-induced contraction. The isolated longitudinal muscle from the rat duodenum was immersed calcium-depleted potassium depolarizing solution. Ten minutes after, 1.8 mM $CaCl_2$ was added to muscle bath and elicited a biphasic increase in muscle tension. Cyclobuxine E produced an appreciable inhibition of both components of the mechanical response. In addition, Cyclobuxine E introduced at a point when the tonic response had reached its maximum level, caused the muscle to exhibit a rapid loss of tension. Based on these experimental results, we proposed the possibility that the inhibitory action of cyclobuxine E on the isolated rat duodenum may be due to inhibiting the transmembrane fluxes of calcium ion in potassium-activated calcium channels.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.348-356
• /
• 2007

Statistical and probabilistic method was used in the analysis of data, which is the most effective one in describing the various natures, and the methodology relating the results with the design was developed. Influents and effluents of three treatment plants were analyzed and the focus was made on BOD, COD, SS, IN, TP The fluctuations of influent such as BOD, COD, SS were extremely large and their standard deviations(st.dev) were more than 10 mg/L. but those of TN, TP were small; the st.dev was 6.6 mg/L for TN, 0.6 mg/L for TP, respectively. But, effluent concentration showed consistent pattern regardless of the influent fluctuations, the st.dev was ranged between 0.28 and 4.48 mg/L. Effluent distributional characteristics were as follows; BOD, COD were distributed normally, but SS, TN, and TP, log-normally; unsymmetric and skewed to the right. The coefficient of reliability(COR) based on the results of statistics of data was introduced to evaluate the process performance an4 to reflect the process performance to the process design. The coefficient of reliability relates the design value(the goal) with the standards and it can be used in operating treatment facilities under a certain reliability level and/or in evaluating the reliability of the treatment facilities on operation. Each treated water quality of effluent showed the half of water quality standards in the level of 50% percentile and all treatment plant was achieved 100% probability of water quality standards. It was concluded that the variability of the process performance should be reflected to the design procedure and the standards through the analysis based on the statistics and the probability.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.25-35
• /
• 2005

This study analyzed total concentrations and existing forms of heavy metals in soils of Ulsan using a sequential extraction method. Soil samples were collected from 6 categorized areas including green, residential, heavy traffic, petrochemical industrial complex(IC), mechanical and shipbuilding IC, and non-ferrous metal IC areas. which represent different emission characteristics. The highest total concentrations of heavy metals by a sequential extraction analysis were observed in the soils collected from the non-ferrous metal IC area, followed by the mechanical and shipbuilding IC and heavy traffic areas. Dominant(> 50%) existing forms of Cd, Cr and Ni were residual forms followed by Fe and Mn oxides in almost areas. Residual fractions in the non-ferrous metal IC areas were relatively lower than those in other areas. However, the fractions of organic and sulphides in the IC areas were higher. The dominant farms of Cu were much different with the investigated areas. In most areas, the dominant forms of Pb and Zn were Fe and Mn oxides, followed by residual fraction for Pb. The exchangeable and carbonate fractions represent mobility of metallic elements in soils. They are also significantly affected by the environmental renditions, such as pHs of soil and rainfall. In this study the exchangeable and carbonate fractions were lower than other fractions. Because the total concentrations of heavy metals in the soils of the non-ferrous metal IC area were extremely high, however, the mobile fractions of heavy metals in the IC area would be significant. Thus a large amount of heavy metals can be released into plants, water bodies, and soils. Therefore, urgent measures, such as source control for soil remediation of heavy metals, in the non-ferrous metal IC areas are essentially required. Analysis results obtained from the sequential extraction and the aqua regia extraction showed a high correlation, whose determination coefficients(R2) of heavy metals except Cd approximately ranged from 0.7 to 0.9.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.61-72
• /
• 2004

The soil samples were collected from the paddy field near the mine tailing dumps in the abandoned Duckum mine in Korea. In the laboratory, the soil solution was extracted from the soil using centrifuge, and analysed for the chemical composition. Physical and chemical soil properties were also analysed. Kaolinite is the main clay minerals in the paddy soil and the CEC value is therefore relatively low. Nearly all soil samples show enrichment in their trace elemental concentrations(Cd, Cu, Pb and Zn) compared with natural background level. Some soil samples exceed the soil remediation intervention values for Cd, Pb and Zn and target value for Cu, when compared with Dutch standard, whereas As, Ni and Cr are in normal range. Lead concentrations in some samples near the mine tailing dumps also exceed the standard for remediation act for agricultural area set by Korean soil conservation law. The trace elemental concentrations are higher in the paddy soil nearer the mine tailing dumps and lower for the samples from distance. Similar trend with distance is found for the soil solution chemistry but the decrease with distance from the mine tailing dumps are sharper than the changes in soil chemistry. Cadmium, Cu and Pb concentrations in the soil solution are very low, ranging from a tenth and hundredths to a maximum of several mg/l, whereas their concentrations in soils are highly enriched for natural background. Most of the trace elements are thought to be either removed by reduced iron sulphides or iron oxides, depending on the redox changes. Geochemical equilibrium modelling indicate the presence of solubility controlling solid phases for Cd and Pb, whereas Zn and Cu might have been controlled by adsorption/desorption processes. Although pollutants migration through solution phase are thought to be limited by adsorption onto various Fe, Mn solid phases, the pollutants exist as easily releasable fractions such as exchangeable site. In this case, the paddy soil would act as pollutant pool, which will supply to plants in situ. whenever the geochemical conditions favour.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.282-286
• /
• 2005

This study was to investigate the content of total phenolic compounds, electron donating ability, nitrate-scavenging effect, and angiotensin converting enzyme(ACE) inhibition effect of medicinal plant liquors prepared from Cnidium officinale, Angelica gigas, Pueraria thunbergiana(root), Pueraria thunbergiana (flower), and Glycyrrhiza uralensis. Physicochemical characteristics of the medicinal plant liquors are as follows: pH $5.65{\sim}6.36$; reducing sugar, $0.13{\sim}0.45\%$. The highest value of total phenolic compounds was found in liquor prepared with Pueraria thunbergiana(root) as $23.9{\sim}54.3\;mg\%$. The electron donating ability of liquor prepared with Pueraria thunbergiana showed the highest value($67.4{\sim}85.3\%$) among the liquors, and its nitrite scavenging ability($24.56{\sim}78.3\%$) showed the highest value than those of other medicianal plant liquors. ACE inhibitory activity showed the highest value in liquor prepared with Cnidium officinale.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.62-72
• /
• 1985

In order to find out the effects of seeding time on growth, dry matter production and nutritive content of Pioneer 931, Pioneer 988 and Piper, this study was carried out on the experimental field of Livestock Experiment Station in 1981-83. Seeding time were 7 with 14-day interval from April 16 to July 9. The results are summarized as follows: 1. It tool about 12 to 13 days from seeding to emergence in case of Mid-April seeding and 7 to 8 days in Late-June. Earlier seeding, more longer growth period from emergence to heading they required. 2. Plant height of Pioneer 931 seeded lately was longer than 4.5 meters in primary growth and Sudangrass was about 2.0 to 2.5 meters. Leaf area was the greatest in Mid-August by early seeding but it was increased until Early-October by late seeding. 3. Sorghum gas brought the highest yield in dry mater and Sudangrass the lowest. In general dry matter yield reduced gradually in response to later seeding but Pioneer 931 has brought more than 10 tons per hecter until Late-June. 4. Relative Growth Rate, Leaf Area Ratio and Leaf Weight of all varieties decreased in accordance with growth development. 5. Crude protein content of leaf was higher than stem and the younger the plants, the more protein they contain. Nitrogen Free Extract was just opposite to crude protein.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.261-274
• /
• 1996

In the present age dominate by both cer-taingty of 1% and uncertainty of 99% 'Fuzzy thinking' of Bart Kosko that is the way to solve the problems by the scientific way through a worldview of Buddhism or Taoism greatly prevails around the world over 'Lateral greatly prevails around the world over 'Lateral thinking' and the authenticity or the right and-wrong of the uncertainty which is the thinking way to find the answer of the problems of illogical way of Edward de Beno against the western vertical thinking were Concurrently fashion designers over the world also adopt the oriental elements. But there exist differences of thoughts between the orient and the occident. And they have dif-ferent thinking way of aestheticism and references of the value on the beauty. Not only beauty but the view through the mind as intuitional thought in which not only the rec-ognition of sense but also the rationalism and the naturalness play key role. The aesthetic sense in the orient contains both the truth and virtue. 2) The beauty of the mean It's from the thought of neutralization of Confucius. The mean or moderation state which in harmony with ethical virtue and aes-thetic beauty is the ideal and is the ultimate. Therefore the thought of Confucian is the creativity in which the balance and the har-mony is most important. Fashion design is also one of the representation of the mean because the spirit of the designer is harmonized for-mlessly with the object of the model of the fashion design. 2) The beauty of skillfulness It indicates the Taoism of Lao-tzu and Chuangtzu. It takes a super-artistic declar-ation that human can feel and recognize the color of colorlessness the sound of sound-lessness and the taste of tastelessness. The thought of arts affected by Taoism is 'ad-vanced age' called the beauty of skillfulness. The view of arts of lao-tzu takes the beauty of cosmos and the nature as a standard. Es-pecially the beauty of inactivity is recognized by the linkage between the beauty and the ugliness. And these things appear in fashion design as a design element such as humor or exaggeration. 3) The beauty of non-dualism It is thought of Buddhism that all evil passions of worry occur form the opposition in dualism. Finally this thought leads to that everything is consistent and truth is only one from the point of view that virtue and vice has on linkage that is 'no virtues no vices' and 'one with two, two, with one, one is not two' A big tendency like this became the root forma-tion of the thought of the oriental arts. 3. Characteristics of the oriental aesthetic sense on the present fashion design 1) The formation of the fashion design on the oriental elements In the picture-incantation which was a representation of an era when the thought of 'cosmic dual forces' dominated the basic polygons of 'a circle square triangle' means both 'one two three' and 'the negative positive mean' of cosmic elements. From this point of view the was of planner cutting in the Orient is dif-ferent from that of the Occidental which is in three-dimensional. The planner polygon type of the cut-pieces comes to have the meaning of the three-dimension when they consist of a suit that has the combination of each cut-piece. This shows the consistency with the principle of cosmos creation of Taoism that one is two two is three and three is every-thing. 2) The coloring and the symbolic represen-tation of the fashion design on the orien-tal elements The sense on the colors in the Orient from the thought of 'the cosmic dual forces and the five elements' is not the experi-enced from the knowledge but contains the consideration of philosophy Five-primary-color representing compass directions Blue(East) Red(South) Yellow(Center) White (West) and Black (North) is called ' the posi-tive' for this five-primary-color secondary-color which comes from the compound of the primary colors is called 'the negative' The thought of 'the cosmic dual forces and the five elements' is also an theory containing the natural order of the cos-mos and this shows the perceptional differ-ence that they are not conceptual but to be recognized and fell directly. A thought of Buddhism which is 'Colors are colorlessness and Clolorlessness are color's proves that. 3) The pattern and symbolic representation of the fashion design on the oriental elements The pattern as a visual style is a figure of symbolic representation which adopt the mental and physical world of human and are the compo-sition of artistic revelation of the human nature and the religous thought of incantation. Es-pecially the symbolic representation of the oriental thought of Confusion. Buddhism and Taoism There are patterns such as plants aminals the oriental four gods and geometry. From the above it's the time toward the 21'th century when the world is constructing one global area and one historical zone. And the exotic mood of the Orient represented in the fashion which doesn't make the common feeling in general does not cease to develop only to express the visual modeling but also adopts the thought religion and the art which are the root of the Orientail and contains inherent willing of modeling.

• Korean journal of applied entomology
• /
• v.12 no.3
• /
• pp.115-120
• /
• 1973

An experiment was carried out to investigate possible use of several systemic insecticides as seed treatment to control some insect pests of rice, barley and soybean. The insecticides were impregnated with active carbon dust and $2\%$ water solution of methyl cellulose as skicker. The seeds were dressed with the insecticides: Fussol (Monofluoroacetamide), Dimethoate (0, 0-dimethyl-S-(N-methyl carbamoylmethyl) phosphorodithioate), Metasystox (0, 0-dimethyl 0-2 ethylthioethyl phosphorodithioate), Dimecron (0, 0-dimethyl (diethylamide-1-chlorocrotonyl) Phosphate). The seeds were treated at the rate of $4\%$ by grain weight. Effects of seed treatments with systemic insecticides on the seed germination and insecticidal effectiveness were tested. Fer rice, no seed germination was observed in Fussol treatment. Dimethoate, Metasystox and Dimecron showed a slight reduction in germination when seeds were sown 1 day after treatment, but they showed gradual reduction in germination when seeds were sown 20 and 45 days after treatment. Especially Diriethoate treatment showed significant reduction in germination after 20 and 45 days of storage. All the insecticides reduced seedling stands of barley somewhat. No plant emergence was observed in Fussol treatments after 25 and :to days of storage. In case of the 40 days of storge in barley seed treated with Dimethoate, Hetasystox and Dimecron there was no gignificant reduction in plant emergence except Fussol treatment. Dimethoate was highly toxic to the soybean seed viability. However, there was no significant reduction in the soybean germination after 1 day of storage. in Fussol, Metasystox and Dimecron treatments After 25 days of storag in Fussol and Dimethoate treatments, no plant emergence was observed, and there was $13.3\%$ emergence in Metasystox treatment, and $93.0\%$ emergence in Dimecron treatment. Dimethoate treatment in rice seed(variety Suwon # 82) showed $90\%$ mortality at the twentieth day and $33.3\%$ at the thirtieth day after sowing against the green rice leafhopper, Nephotettix cincticeps But no visible effectiveness was observed in Metasystox and Dimecron treatments. Dimethoate treatment in barley seed resulted in low population density of aphids. Rhopalosiphum spp. Final observation on the number of eggs per plant was made at the fiftieth day after sowing; 2 in Dimethoate, 4 in Fussol, 6 in Metasystox, 7 in Dimecron, and 13 in check plots. All the insecticides tested resulted in good insecticidal effectiveness against the aphids, Aulocorthum solani on soybean plant at the ninth day infestation after sowing. Dimethote, Metasystox, and Dimecron treated soybean plants was still effective in controlling the aphids to the eighteenth day infestation.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.157-162
• /
• 1996

Experiments were conducted from 1994 to 1995 to understand the effects of the labor-saving seeding and planting density on growth and root yield of Astragalus membranaceus. The drilling seeder reduced seeding time than the hand seeding; It takes 3. 5hrs/l0a to seed by drilling seeder while 33. 0hrs/l0a by hand seeding, which labor reducing rate was 89. 4 %. Emergence rate in the drilling seeder was increased 17% than in the hand seeding, so the root yield were increased 23% to 136. lkg/l0a in using drilling seeder compared to 110. 3kg in hand seeding. On the effect of planting density on the growth characteristics plant height was long in dense planting and stem diameter was thick in spacious planting. Root diameter and dry root weight root per plant were decreased in dense planting and root yield was highest in optimum planting densities $(6\;row\;(15cm)\;{\times}\;10cm)$ in the harvest of 1 year old plants in Astragalus membranaceus. The gross profit were increased 23% to 1,933 thousand won per l0a in the drilling seeder compared to 1,566 thousand won in the hand seeding, also the managing costs were reduced 18% to 406 thousand won per l0a in the drilling seeder than 494 thousand won per l0a in the hand seeding.