• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1702-1703
• /
• 2011

MEMS 소자의 Wafer level Package 관련하여 Deep cavity를 가진 Cap Wafer와 Polymer bonding 중 cavity 단차로 인한 Polymer Patterning 및 접합 불량의 어려움을 극복할 수 있는 새로운 공정 flow를 제안하였다. Cavity를 형성할 때 사용하는 Si deep etching Mask인 기존의 Photoresist를 접합용 감광성 Polymer로 대체하고, cavity 형성 후, 별도의 추가 공정 없이 이 Polymer를 이용해 Wafer bonding을 진행하였다. 이를 통해 cavity 단차에 따른 문제를 해결함과 동시에 공정이 단순하고 제작 비용이 저렴하며, 신뢰성 있는 Wafer level Package를 구현하였다.

• 농촌계획
• /
• 제14권2호
• /
• pp.99-110
• /
• 2008

The purposes of this paper are first, to develop and adapt auditing methodology of rural amenity resource investigation and second, to propose strategic planning of amenity web data base system. Relating with auditing methodology, we make the life cycle of rural amenity resource investigation based on value chain method. we make 8 stage of auditing process and 105 auditing items in details. We adapt these guidelines in real world and then improve developed methodology. Therefore we expect to promote the quality and accuracy of investigation project using these guidelines. Relating with blue print of strategic planning, we first analyse external environment about Competitors, Suppliers, New entrants, Buyers, Substitutes with 5 force model for amenity information system. We second make the blue print of strategic planning of amenity web data base system project. Then we propose the FIRST, BEST, MOST strategy of amenity web data base system and the web hub system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.305-309
• /
• 2000

In this paper, we presents a new methodology for face recognition after analysing conventional ICA(Independent Component Analysis) based approach. In the literature we found that ICA based methods have followed the same procedure without any exception, first PCA(Principal Component Analysis) has been used for feature extraction, next ICA learning method has been applied for feature enhancement in the reduced dimension. However, it is contradiction that features are extracted using higher order moments depend on variance, the second order statistics. It is not considered that a necessary component can be located in the discarded feature space. In the new methodology, features are extracted using the magnitude of kurtosis(4-th order central moment or cumulant). This corresponds to the PCA based feature extraction using eigenvalue(2nd order central moment or variance). The synergy effect of PCA and ICA can be achieved if PCA is used for noise reduction filter. ICA methodology is analysed using SVD(Singular Value Decomposition). PCA does whitening and noise reduction. ICA performs the feature extraction. Simulation results show the effectiveness of the methodology compared to the conventional ICA approach.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.90-97
• /
• 2015

Optimization of multi-quality characteristics in injection molded parts is very important, but it is sometimes difficult for part/mold designers. The objective of this study is to develop a practical design methodology for optimizing two-quality characteristics of injection molded parts. To attain this end, we developed a new design-range reduction algorithm based on Taguchi's orthogonal arrays for two characteristics. Then, the algorithm was integrated with commercial injection-molding simulation tools. A feature of the proposed methodology is that it allows field-designers unfamiliar with general optimization methods to be able to apply the methodology to their design problems with ease. Finally, we have applied the proposed design methodology to optimization of weldlines and deflections in an actual bezel model. The results show the usefulness of this methodology.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.101-107
• /
• 1997

In order to detect and suppress chatter in turning process, a stability control methodology was studied through manipulation of spindle speeds regarding to chatter frequencies, The chatter frequency was identified by monitoring and signal processing of sound pressure during turing on a lathe. The stability control methodology can select stable spindle speeds without knowing a prior knowledge of machine compliances and cutting dynamics. Reliability of the developed stability control methodology was verified through turing experiments on an engine lathe. Experimental results show that a microphone is an excellent sensor for chatter detection and control .

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.613-616
• /
• 1997

MDO(Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided engineering(CAE) system. And this paper treats the structural design problem of RIROB(Reactor Inspection Robot) through the application of MDO methodology. In a MDO methodology application to the structural design of RIBOS, kinetodynamic analysis is done using a simple fluiddynamic analysis model for the warter flow over the sensor support surface instead of difficult fluid dynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. The minimum thickness (0.8cm) of the RIROB housing is obtained for the safe design of RIROB. The kinetodynamic analysis of RIROB. The kinetodynamic analysis of RIROB is done using ADAMS and the static structural analysis of RIROB is done using NISA.

• 경영과학
• /
• 제13권3호
• /
• pp.49-73
• /
• 1996

Common problems have been observed in the existing Information Requirements Analysis (IRA) methodologies such as BSP(IBM), CSF(Rockart), or ISP(Information Engineering), etc. These methodologies require too much time and human resources for the IRA process, involves high complexity, and their IRA outcomes are frequently biased by the subjective views of the people involved. In this paper, we introduce a new methodology for the enterprise wide information requirements analysis utilizing templates and nine closed-ended questions. Extending the BIAIT(Business Information Analysis and Integration Technique) method, this methodology presents nine question about each firm's order type(7Q's for customer side and 2Q's for supplier side) to derive information processing characteristics of the firms. As the central component of this methodology, data and process templates for the manufacturing industry were established. To validate the methodology, suitability of the data and process templates were examined through six real world business cases.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 춘계학술발표회 논문집
• /
• pp.83-89
• /
• 1998

In case of Radar Simulator ,the target ships should be generated and displayed on the monitor to provide the trainee with the feeling of real situation. The scenario methodology, which has been developed and used in Korea so far, however, has a fixed scenario, in which target ships are generated in the same manner at all time. As a result, the Radar simulator developed in Korea so far was in lack of training efficiency, as the trainee can get earily familiarized with the fixed scenaio. The paper, therefore, suggests the target ship generating methodology using random variables to improve the training efficiency of the existing simulator. In generating the target ships using this methodology, the speed, distance between the ships , and time interval of ships and time of ships were considered as a major factors which dterminie the ship's movements. The new methodology suggested was examined and found to generate target ships successfully giving a trainee the feeling of real situation.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.211-216
• /
• 2004

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through DFSS methodology research and analysis.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.370-376
• /
• 2009

Study of IFI(Integrated Field Innovation) means change of management. This study sill introduces IFI which is a new methodology of change and innovation of workers, and will describe how workers participated in the activities voluntarily. The principle of IFI is that letting employees to find the problems of the sites -anything that makes employees considering as the problem while they are working-and solve those problems through any tools own their own. Workers do not have to waste their time on bounding by unnecessary tools and processes. There are some cases that company "D" has been actually applied the IFI methodology in 2008. By application of IFI methodology to "D" company, which is proved that methodology is good change management program for workers who work in the manufacturing field.