• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.281-285
• /
• 2008

The railroad roadbed plays an important role in distributing and transferring the train loading to subgrade, preventing subgrade from bearing softened by providing appropriate stiffness for subgrade, and eventually supporting the track structures. Presently, the reinforced roadbed was widely constructed in high speed line and is proceeding a research about economical thickness and methodologies for the design of reinforced roadbed. Field test section is located at Kyungbu line which is from Suwon to Cheonan In this study, field test were measured a track irregularity with several types of reinforced roadbed materials by using Track Master. The field testing were conducted between March, 2006 and April, 2008.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.442-446
• /
• 2009

As the railway transportation is getting faster and its operation speed has increased rapidly, its signal control has been complicated. For real time signal processing it is very important to prohibit any critical error from causing the system to malfunction. Today, most of the railroad's controling communications between wayside and train are made in one way. Therefore, by using a forward error correction technique, which receiver can actively correct the signal error, we can increase the performance and the stability of the railroad signaling system. In this paper, we introduce low density parity check(LDPC) that is used by next generation wireless communications and DMB technique. We verified that we can achieve low bit error rate(BER) in high signal to noise ratio(SNR) by using LDPC.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.1074-1079
• /
• 2002

Long term measurement data on the bridge response caused by moving loads are fundamental ingredient to the development or improvement of the new bridge design. In addition, proper establishment of the systematic analysis and diagnosis together with the maintenance system become the essential procedure to the effective repair/reinforcement/retrofit of not only the high speed but also the conventional railway bridges. Therefore, the real time health monitoring system on the important railway bridges should be enhancing the proper maintenance of the structures. The main objective of this study is, therefore, to develop a monitoring device including Weigh-In-Motion (WIM) function and the emphasis is place on the easy and economic installation of the developed system in the field condition.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.824-829
• /
• 2004

In this paper, the process of development of resilient sleepers, which improves the train safety, passenger comfort and reduces the noise and vibration, is presented. To optimize the bonding method between elastic pad and PC sleeper, special pad shape like arrow is adopted and is applied in manufacturing. Bonding strength and reduction effects of vibration of the resilient sleepers are experimentally investigated. From the experiment results, it is investigated that the bonding strenth is enough to satisfaction the criteria and the vibration characteristic is also more effective for sleeper with elastic pad than that in ordinary PC form. These results indicate that the elastic pad can reduce possibility of rail-corrugations and thus resulting in the reduction of maintenance costs.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1502-1507
• /
• 2004

In the 21st century, the traffic culture is changing suddenly with the advent of high-speed train era so called the traffic revolution age. The policy management for inducing the creativity becomes important for research institutes since the research institutes play an important role for the lead and distribution of new technologies. Therefore, the approach strategy of this investigation is based on the viewpoint of the organizational culture for better performance of research and development through stimulating inducements of creativity and active action of members. A questionnaire survey was performed on five research institutes including a professional railway research institute (PRRI) and four industrial research institutes for the current research, and a development plan for organizational culture of a PRRI has been presented based on the comparison study between two different types of research institutes.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.353-354
• /
• 2007

GIS(Geographic Information System)를 이용한 응용기술은 철도 선로구축물의 유지보수 분야에서 많이 사용하고 있다. 하지만 실제 철도차량 운행시에 이상 징후가 발생하는 위치를 정확히 파악한다면 유지보수 업무에 도움이 될 것이다. 본 논문에서는 고속열차의 원격모니터링을 위해 철도기본지리정보와 같은 GIS를 활용하는 방법을 소개한다. 철도기본지리정보 GIS에 현재 열차의 주행위치를 현시하고 별도의 그래프를 통해 주행속도, 가속도 등을 현시할 수 있는 기능에 대해 소개한다.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.433-438
• /
• 2003

The recent operating trains including the high speed train are mostly moving system on the rail and system use the mechanical propulsion force to drive the gear and wheel by the traction motor. Advanced countries are interested in Magnetic Levitation Vehicle and they have been studying about it continuously. Thus this paper is analyzed the feature of analysis the feature for Linear Induction Motor as the propulsion equipment of Magnetic Levitation Vehicle. And the Magnetic Levitation Vehicle is being developed for the transportation system of next generation using the Finite Element Method

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.318-325
• /
• 2005

In present, KTX's wheel is worn inevitably according to the interaction with rail in service. It was analyzed by wearing type, damage type and wheel reprofiling cycle on the running surface. As a result, damage on the running surface is main cause to reprofile the wheel. Wearing type of wheel is normal and it hasn't reprofiled according to normal wheel wear. As a follow-up result of the whee] defects on the running surface, if the defects size is well managed by periodical inspection, it would be efficient to increase the wheel life.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.49-58
• /
• 2003

In this paper, the structural strengths of a rolling stock seat were numerically evaluated under several design load conditions based on the UIC requirements. The rolling stock seat was designed for the high speed train of a Chinese conventional line. To maximize its weight reduction and structural strength, some aluminium alloys like 6N01-T5 and ALDC8-T5 were applied to the base frame, side frame and armrest. The designed seat frame satisfied the strength requirements on inertia loads due to accelerations, and fatigue test conditions. However, it violated the requirements on the static test of UIC 566 OR. Some design modifications were suggested and numerically evaluated to satisfy the static test requirements.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.281-286
• /
• 2003

Experimental study is conducted to clarify the inside and outside pressure variation of passenger cabin for KTX. These pressure variation may give rise to the ear-discomfort. Generally ear-discomfort has been considered as a problem related to high speed train. In this study, the pressure variation of interior, gangway and exterior of KTX passenger car is measured by using the atmospheric pressure sensors and portable data acquisition system. The tunnel from 4000m to 200m in length are chosen for the investigation of length effects. From the results of experiment, the pressure variation of interior per second is under the ear-discomfort limitation in all of tunnel. And, We found that there is a similar pattern of exterior pressure variation. These results generally agree with RTRI's experimental result for Shinkansen.