• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.37-45
• /
• 1990

An analytical procedure is proposed for the seismic analysis of a soil-structure interaction system with besemat uplift, including the effects of concurrent vertical seismic ground motion, nonlinear distribution of bearing soil pressure under the basemat, and 3-dimensional behavior of the system. The soil-structure interaction system is assumed to have rectangular-shaped basemat on elastic half-space. Nonlinearity of soil spring constants and soil damping coefficients induced by the base mat uplift is modeled by considering not only the reduction of contact area between soil and structure but also the effects of rigid body rotational motion of the superstructure, and the shift in the point of action of the resultant reaction on the basemat. Throught various parametric studies. it has been confirmed that the seismic responses of the superstructure reduce notably while response at the basemat increases considerably. The results also show that the effects of concurrent vertical ground motion. nonlinear soil pressure distribution under basemat, and 3-dimensional behavior of the system shall be included in uplift analysis in order to obtain the correct structural responses.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.623-640
• /
• 2017

The full nonlinear equations of an unmanned aerial vehicle ground taxiing mathematical dynamic model are built based on a type of unmanned aerial vehicle data in LMS Virtual.Lab Motion. The flexible landing gear model is considered to make the aircraft ground motion more accurate. The electric braking control system is established in MATLAB/Simulink and the experiment of it verifies that the electric braking model with the pressure sensor is fitted well with the actual braking mechanism and it ensures the braking response speediness. The direction rectification control law combining the differential brake and the rudder with 30% anti-skid brake is built to improve the directional stability. Two other rectifying control laws are demonstrated to compare with the designed control law to verify that the designed control is of high directional stability and high braking efficiency. The lateral displacement increases by 445.45% with poor rectification performance under the only rudder rectifying control relative to the designed control law. The braking distance rises by 36m and the braking frequency increases by 85.71% under the control law without anti-skid brake. Different landing conditions are simulated to verify the good robustness of the designed rectifying control.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.532-536
• /
• 2008

In this paper, we propose the method to measure tensions of character motions, using LMA (Laban Movement Analysis). Using tension values, we tan take advantage of them as a standard for synchronization of motion and BGM(Back Ground Music). In LMA, a motion is divided into 4 space-time factors which are called Efforts, and each Effort has two bases opposed to each other. We can analyze the motion by justifying which basis is stronger than the other in each Effort of motion. To measure quantitatively tension values, we propose some equations based on kinematics and dynamics. Then we can measure the tension value by the weighted sum of values calculated from those equations. Each weight can be determined by the optimization process which tries to minimize the difference between the calculated tension value and human's decision. The experimental result shows that the in creasing order of the motion tension value is similar to that of the tension score given by human.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.490-497
• /
• 2009

The horizontal and vertical response spectra using the observed ground motion from the recent 5 macro earthquakes were analysed and then were compared to both the seismic design response spectra(Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings(1997). 74 horizontal and 89 vertical observed ground motions, without considering soil types, were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that the horizontal MPOSD(Mean Plus One Sigma Standard Deviation) response spectra revealed much higher values for the whole frequency bands above 1 Hz than Reg. Guide(1.60). For the vertical response spectra, the results showed slightly higher than just between 7 and 8 Hz frequency band. The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the horizontal MPOSD response spectra revealed much higher values for the whole periods below 2 second(0.5 Hz) than those of SE soil type. The vertical response spectra showed similar to the values of the Korean Standard Response Spectrum of SD soil type. These spectral values dependent on frequency could be related to characteristics of the domestic crustal attenuation and the effect of each site amplification. However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the whole frequency bands above the 1 Hz.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.84.1-84.1
• /
• 2010

Globular clusters (GCs) are known to be one of the oldest objects in the Milky Way. Therefore the dynamical informations of GCs are very important to understand the formation and evolution of our Galaxy. Motion of GCs in the halo of Galaxy can be traced by radial velocities of individual stars and proper motions of GCs. Measuring the radial velocities of stars in GCs has been challenging for decades because the brightness of stars (even for the brightest stars) in GCs are too faint (V>14) to measure the radial velocities. The available large telescopes (D>4m) enable us to observe the spectra of stars in the red giant branch of GCs, and it is now more plausible to measure the radial velocities of stars in GCs. On the contrary it is still very difficult to measure the sky-projected two-dimensional motion of GCs in Galaxy even with the large telescopes because the distance to GCs is quite large (~10kpc) compared to the spatial resolution of present-day large ground-based telescopes. Instruments on-board Hubble Space Telescope are ideal to study the proper motion of GCs thanks to their extremely high spatial resolution (~0.05arcsec). We report a study of proper motion of NGC 104, one of the most metal-rich Milky Way GCs, based-on archival images of NGC 104 observed using HST/ACS. Using the stars in Small Magellanic Cloud as reference coordinate, we are able to measure the proper motions of individual stars in NGC 104 with a high precision. We discuss the internal dynamics of stars in NGC 104 by comparing proper motion results based-on shorter (<1yr) and longer (~7yrs) time durations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.60-69
• /
• 2019

In this paper, we deal with forward-looking imaging, and focus on forward-looking synthetic inverse scattering imaging for a vehicle with curved motion. For image formation, time domain correlation(TDC) is used and a 2D image of the ground in front of the vehicle is generated. Because TDC is a technique that implements matched filtering for a space-variant system, it is robust to Gaussian additive noise of measurements. Furthermore, comparison and analysis between images from linear motion and curved motion show that the resolution of the image is improved; however, the entropy of the image is increased owing to curved motion.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.257-263
• /
• 2015

Objective : The purpose of this study was to investigate the effect of genu valgum on the body mass index, movement of lower limb joints, and ground reaction force. Methods : Gait patterns of 30 college students with genu valgum were analyzed and the static Q angle of the femur was measured for selecting genu valgum of the subjects. To analyze the kinetic changes during walking, the six-camera Vicon MX motion analysis system was used. The subjects were asked to walk 12 meters using the more comfortable walking method for walking. After they walked 12 meters more than 10 times, their most natural walking patterns were chosen three times and analyzed. Results : As a result of measuring a relationship between genu valgum and Q-angle, as the Q-angle increases, it showed a genu valgum also increased. Body Mass Index showed a significant difference between the groups was higher in the genu valgum group.(p<.001). The analysis result showed that genu valgum had a significant effect on the internal rotation moment in the hip joint(p<.05). Also, genu valgum had a significant effect on the internal rotation moment of the knee joint(p<.05). The comparative analysis of the Medial-Lateral ground reaction force in the genu valgum group showed a tendency to increase the medial ground reaction force(p<.05). The vertical ground reaction forces of the middle of the stance phase(Fz0) showed a significant increase in genu valgum group(p<.05), in particular the results showed a decrease in the early stance phase(p<.001). Conclusion : In conclusion, the change in body mass is considered to be made by proactive regular exercise for improvement of the genu valgum. In addition, the prevention of the deformation caused by secondary of the genu valgum in this study may be used as an indicator of the position alignment rehabilitation for structural and functional improvements. Applying a therapeutic exercise program for the next lap will require changes in posture alignment.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.457-466
• /
• 2009

This study puts the purpose in providing the scientific basis of dance motion as an artistic expression by analyzing the kinematic variable and the distribution factor of power affecting the motion, which is connected to the turn, right after the arabesque motion according to the existence and non existence of using the arm in the arabesque motion of modern dance. As a result of this study, arabesque turn motion, not using the upper limbs, used more turning force of head and body than the arabesque turn motion, using the upper limbs, and arabesque turn using the upper limbs obtained the turning force, using the right shoulder. The range of the hip joint on the left and the position change of left tiptoe in the Arabesque turn motion using the upper limbs is largely ascended to the vertical axis, while, the position of tiptoe in the Arabesque turn motion, not using the upper limbs is dropped to the lower part of each event. In the replacement of body center, Arabesque turn motion using the upper limbs is moved more to the turning axis than arabesque turn motion not using the upper limbs. As a result of maximum vertical ground reaction force, Arabesque turn motion using the upper limbs appeared to be a lower value than the Arabesque turn motion not using the upper limbs.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.597-600
• /
• 2008

Observed ground motions from the January 2007 magnitude 4.9 Odaesan earthquake and the events occurring in the Gyeongsang provinces are compared with the previously proposed ground attenuation relationships in the Korean Peninsula to select most appropriate one. The selected relationship from the ones for the Korean Peninsula has been compared with attenuation relationships available in HAZUS. Then, the attenuation relation for the Western United States proposed by Sadigh et al.(1997) for the Site Class B has been selected for this study. It has been used for the earthquake loss estimation of the Gyeongju area located in southeast Korea using the deterministic method in HAZUS with a scenario earthquake (M=6.7). Application of the improved methodology for loss estimation in Korea will help decision makers for planning disaster responses and hazard mitigation.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.146-154
• /
• 1994

A series of numerical calculations are performed in order to investigate the dispersion mechanism of toxic gaseous and solid pollutants in extremely short-term and short range. The calculations are carried out in an open space characterized by turbulent boundary layer. The simulation is made by the use of numerical model, in which a control-volume based finite difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling problem. The Reynolds stresses are solved by two-equation, k-$\varepsilon$ model modified for buoyancy. The major parameters consider-ed in this study are temperature, velocity and Injection height of toxic gases, environmental conditions such as temperature and velocity of free stream air, and topographic factor. The results are presented and discussed in detail. The flow field is commonly characterized by the formation of a strong recirculation zone due to the upward motion of the hot toxic gas and ground shear stress. The driving force of the upward motion is explained by the effect of thermal buoyancy of hot gas and the difference of inlet velocity between toxic gas and free stream.