• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.499-505
• /
• 1993

The Imgye hornblendites occur as intrusive sills or dykes within the mylonite zone developed along the contact boundary between Precambrian Jungbongsan granite and Cambrian Jangsan quartzite or Myobong slate formations. The hornlendites belong to the subalkaline and tholeiitic series. In tectonomagmatic discrimination diagrams such as $TiO_2-K_2O-P_2O_5$, 2Nb-Zr/4-Y and $TiO_2-10MnO-10P_2O_5$, the hornblendites are classified into continental- and island-arc tholeiites. The hornblendites show fractionated REE patterns with $(La/Yb)_{CN}$ ranging from 3.73-4.56. In incompatible element abundance variations, the hornblendites show distinctive positive and negative anomalies for Rb and Nb, respectively, and unfractionated patterns of immobile incompatible elements such as Y and Yb. The REE patterns of the hornblendites are also similar to those of typical continental back-arc tholeiites and those of the Precambrian Okbang amphibolites in the Socheon-meon, Bonghwa-gun. Accoiding to geochemical characteristics above-mentioned, the hornblendites seem to have been formed from tholeiitic magmas of depleted upper mantle source, contaminated by crustal material en route to continental back-arc basin.

• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.231-243
• /
• 1994

To better understand the fundamental problems of the true micro-damage in medium-grained granite under uniaxial compressive stress, micro-damage localization, initiation and propagation have been observed in a great detail in contact portion of two grains such as quartz and feldspar. For this purpose, new experimental system allowing us to observe the micro-damaging process continuously was developed. Earlier studies used the specimens of unloaded state and it is difficult to visualize stress-induced microcracks under unloading state. Thus, direct observation under loading state is very important for understanding the true micro-damage process. The results explain well the mechanism of micro-damage at two grains, and mechanics of the micro-damage is clarified well by Hertzian fracture mechanics.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.6
• /
• pp.44-52
• /
• 2007

Recently, oystershell wastes cause serious environmental problem and the need for the researches on the recycling of oystershell have been increased and various methods are already in operation. Field plate bearing tests and numerical analysis were performed to investigate the bearing capacity of oystershell filled geotextile gabion which utilized the waste oystershell at the coastal oyster farm site. The waste oystershell mixed soil specimens were prepared for the laboratory test and field test in terms of varying blending ratio of granite soil and oystershell. Based on the cyclic plate load test results, the spring constant, subgrade modulus of ground, and the reinforcing parameters were determined. The field plate load test results indicate that the bearing capacity of the soil ground with the oystershell mixed ratio of 20% is greater than that of the original ground. Two-dimensional numerical analysis was evaluated the expected deformation in the given conditions. Analysis results show a similar characteristics on bearing capacity with the results of the field plate load test. These findings suggest that the oystershells are very promising construction materials for landfill and earth embankment in coastal area.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.245-261
• /
• 1998

In order to validate the variable aperture channel model that can deal with the non-uniform How rate in flow domain, migration experiments of conservative tracer were performed in two artificial fractures, a parallel and a wedge-shaped fracture. These different fracture shapes were designed to give different flow pattern. The fractures were made from a transparent acrylic plastic plate and a granite slab with dimensions of 10 $\times$ 61 $\times$ 61 cm. Uranine (Fluorescein sodium salt) was used as a conservative tracer. The volumetric flow rates of uranine feed solution were 30 mL/ hr, giving a mean residence time in the fracture of approximately 24 hours for the parallel fracture and 34 hours for the wedge-shaped fracture. The migration plumes of uranine were photographed to obtain profiles in space and time for movement of a tracer in fractures. The photographed migration plume was greatly affected by the geometric shape of fractures. The variable aperture channel model could have predicted the experimental results for the parallel fracture with a large accuracy. It is expected that the variable aperture channel model would be effective to predict the transport of the contaminant, especially, with the flow rate variation in a fracture.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.291-296
• /
• 2007

We measured potential waveform of load, displacement, micro electric signal generated by rock and mortar fracture using PXI A/D Converter. The rock type used for measurement was used granite, limestone and sandstone, and mortar specimen. we made measuring equipment of physical properties to confirm basic information of physical properties, measured physical properties of rock engineering, electric resistivity and seismic velocity. Potential waveform system was built using PXI A/D Converter and measured potential waveform of load, displacement, micro-electric signal generated using this during uniaxial compressive test by the specimen finished such test of physical properties. Using the saturated rock and mortar specimen, micro electric signal increased, and It didn't increase a signal in dried rock and mortar specimen according as load and strain rate increases. But signal also increased in saturated or dried specimen in case of sandstone. It was possible to check the close correlation relationship the signal and fracture behavior by a compressive load as the signal of fracture position was increased bigger than the other position. It was also possible to check the correlation relationship between physical properties and micro geo-electric signal.

• Journal of Plant Biology
• /
• v.6 no.3
• /
• pp.1-5
• /
• 1963

Determination of the chemical properties in some forest soils and the naked soil developed on granite in the mountains of the vicinity of Seoul, Korea are presented in this study. The soil under the broad leaved forests has a higher nutrient indicated by available nitrogen, nitrate nitrogen, and phosphorus contents, compared with that under the needle leved forests. On the contrary the content of organic matter and base exchange capacity in the needle forest soils is higher than in the broad leaved forest soils. The significant difference between two horizons of each soil appeared only to be in the content of the available phosphorus, and that of the needle and the broad leaved forest soils, and the naked soils was the nitrate nitrogen and organic matter content among the several chemical properties.

• Geotechnical Engineering
• /
• v.14 no.1
• /
• pp.49-58
• /
• 1998

It was investigated whether the scrap tire can be recycled as a construction material for controlling the frost heave of the ground. Some frost heave tests and a frost penetration depth test in the laboratory were performed on the weathered granite soil mitred with variable amount of scrap tire powder under the atmospheric temperature at -$17^{\circ}$ to find the basic effects of the scrap tire on the control of frost. The frost heave control layer of the crushed stone mixed with scrap tire chips directly below thin subbass in the bituminous pavement was found to be effective for practical use. And the equation for the required thickness of this frost heave control layer with freezing index was suggested.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.127-135
• /
• 2002

The relationship between the seismic velocity and RQD was estimated using the RQD data obtained from the optical borehole image processing and drill core logs and the seismic velocity measured from the PS logging. The seismic velocity and crack aperture show a high correlation in the granite in Yuseong area and banded gneiss in Paldang area. However, such a relationship cannot be found in the sedimentary rock in Sabuk area. In the sedimentary rock of Sabbuk area, the seismic velocity shows widespread distribution especially in the 0∼20mm range of accumulated crack aperture probably because the wide distribution of fracture zone in coaly shale results in the inaccurate measurements of the crack aperture.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.179-187
• /
• 2006

Two specimens of mortar containing artificial slit and Geochang granite containing the straight notch were selected to be used in this research. Source mechanism of micro-crack by radiation pattern based on dislocation the-ory was estimated by the first motion of longitudinal wave and spatial distribution between the location of transducers for monitoring acoustic emission and source coordinates determined by the application of the least square method. Result of analysis showed that the orientation of dislocation surfaces due to shear dislocation and tensile dislocation squares considerably with crack direction visually observed. The ultimate goal of this study is to provide fundamental information for source mechanism of micro-crack within materials.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.33-45
• /
• 2011

The purpose of this study to analyze landslide-triggering factors using the 38 landslide cases occurred by typhoon, Rusa in 2002, Maemi in 2003 and Ewiniar in 2006 and geospatial characteristics in Hamyang and Geochang County. where two day's heavy rainfall was concentrated on. The rainfalls factors to trigger landslides were accumulative rainfall (>230mm) and rainfall intensity(>30-75mm). The highest landslide frequency was concentrated on the areas of 400-900m in height and on the slopes of $25-40^{\circ}$ in degree. The frequency of landslide was high exceedingly above 80% of a slope attitude, while the frequency is very low below 70%. Granite was more susceptible as much as 9 times than metamorphic rocks. In areas mixed soil with gravels and rock blocks, the frequency of landslide was 73%.