• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.93-98
• /
• 2004

The sand-covered Muweilah archaeological site in the United Arab Emirates (UAE) is a unique Iron Age site, and has been subject to intensive investigations. However, excavations are time consuming and may require twenty years to complete. Thus geophysical surveys were undertaken with the objective of characterising the site more expeditiously. This paper presents preliminary results of these surveys. Ground penetrating radar (GPR) was tested as a primary imaging tool, with an ancillary shallow time domain EM (MetalMapper) system. Dense 3D GPR datasets were migrated to produce horizontal (plan view) depth slices at 10 cm intervals, which is conceptually similar to the archaeologists' excavation methodology. The objective was to map all features associated with anthropogenic activity. This required delineating extensive linear and planar features, which could represent infrastructure. The correlation between these and isolated point reflectors, which could indicate anthropogenic activity, was then assessed. Finally, MetalMapper images were used to discriminate between metallic and non-metallic scatterers. The moderately resistive sand cover allowed GPR depth penetration of up to 5 m with a 500 MHz system. GPR successfully mapped floor levels, walls, and isolated anthropogenic activity, but crumbling walls were difficult to track in some cases. From this study, two possible courtyard areas were recognised. The MetalMapper was less successful because of its limited depth penetration of 50 cm. Despite this, the system was still useful in detecting modem-day ferruginous waste and bronze artefacts. The results (subject to ongoing ground-truthing) indicated that GPR was optimal for sites like Muweilah, which are buried under a few metres of sand. The 3D survey methodology proved essential to achieve line-to-line correlation for tracking walls. In performing the surveys, a significant improvement in data quality ensued when survey areas were flattened and de-vegetated. Although MetalMapper surveys were not as useful, they certainly indicated the value of including other geophysical data to constrain interpretation of complex GPR features.

• Geophysics and Geophysical Exploration
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2018

To characterize virtual reflection images of deep subsurface by the method of seismic interferometry, we analyzed effects of offset range, ambient noise, missing data, and statics on interferograms. For the analyses, seismic energy was simulated to be generated by a 5 Hz point source at the surface. Vertical components of particle velocity were computed at 201 sensor locations at 100 m depths of 1 km intervals by the finite difference method. Each pair of synthetic seismic traces was cross-correlated to generate stacked reflection section by the conventional processing method. Wide-angle reflection problems in reflection interferometry can be minimized by setting a maximum offset range. Ambient noise, missing data, and statics turn to yield processing noise that spreads out from virtual sources due to stretch mutes during normal moveout corrections. The level of processing noise is most sensitive to amplitude and duration time of ambient noise in stacked sections but also affected by number of missing data and the amount of statics.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.159-169
• /
• 1993

As Global Positioning System is able to provide 24-hour all weather surveying capability and high precision survey in three dimension, expected that the extensive use of GPS to support geophysics, geophysics, millitary and time correction etc. But in order to use the GPS results effectively, we have to solve problems about coordinates transformation relating the WGS84 to Bessel Datums and development of the accurate geoid undulation model. In this paper, we derive polynomial model equations about geoid undulation around local area(longitude $126^{\circ}{\sim}129^{\circ}$, latitude $36^{\circ}{\sim}37^{\circ}$) in Korea by GPS/Leveling method, also study the geoidal height calcaulation methods supplemented by Earth Gravitational Models (OSU981A, OSU86F).

• Geophysics and Geophysical Exploration
• /
• v.23 no.2
• /
• pp.89-96
• /
• 2020

This tutorial summarizes the coordinate transforms for formulating geophysical problems. To ensure mathematical consistency, this discussion begins with the right-hand rule. Further, the concepts of active and passive transforms are introduced. By extending these concepts, the coordinate transform and its inverse between two coordinates are related to the matrix transpose. The yaw-pitch-roll rotation and the azimuth-deviation-tool face rotation transforms are described as the most frequently used schemes, and the relation between the Rodrigues' rotation formula and these two transforms are mathematically explained. The "Gimbal Lock" problem inherent in yaw-pitch-roll rotation is schematically presented and mathematically derived. As a useful tool overcome this problem, the principle and usage of the quaternion is also described.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.21 no.1
• /
• pp.17-30
• /
• 1993

The basic processes responsible for the generation of oceanic fronts were reviewed. In particular the process of a shelf sea front produced by tidal stirring was identified from the one dimensional model of the water column in the coastal area, which incorporates the microscale process for the formation of a tidal front. Also a new criterion to predict its location was suggested. The time evolutions of the distributions of density and turbulent kinetic energy calculated from the model show that the criterion for the formation of a thermocline can be predicted as $R{\delta}^4$~ constant for large $\delta$ ($\delta$＞0.5), but the dependence on $\delta$ decreases as $\delta$ goes to O, where $R=H^4Q/{K_b}^3$,{\;}{\delta}=1-Do/H$, Q is the buoyancy flux at the surface, $K_b$ is the eddy diffusivity maintained at the bottom and Do is the depth of a thermocline in the absence of bottom mixing. The depth of a thermocline was found to decrease as the bottom mixing increases for a given value of Do. The results were interpreted in comparison with the previous studies.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.21 no.1
• /
• pp.47-54
• /
• 1993

The major positive sea surface temperature(SST) anomalies not only occur in the region with the most moisture increase, but also in the flank of the area with sinking motion in the Subtropics. As the large amount of water vapor has been increased by the SST anomaly, the increased of the SST is expected to destabilize the air and leads under moist adiabatic unstable conditions, to an enhanced development of moisture cluster. The 4.0 K change of SST causes the positive difference of Brightness Temperature(TB) of about 10.0k for water vapor channels of TOVS over the north eastern and central tropical Pacific Ocean, but the negative difference of TB of about 7.5 K is shifted southward and southeastward to Southern Pacific Ocean along the equator correspondingly. The difference of the TBs for IR water vapor channel $11(7.3{\mu}m)$ and $12(6.7{\mu}m)$ of TOVS indicative of the moisture distribution during two time periods(January 1983 and 1984), leads us to infer significant changes in the entire tropospheric circulations and the dynamic processes over the Pacific Ocean.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.24 no.1
• /
• pp.29-45
• /
• 1996

Before (March 26, 1994) or after the occurrence of a downslope windstorm (March 29), the NO, $NO_2$, and $SO_2$ at the ground level of Kangnung city were monitored with high concentrations in the afternoon, due to a large amount of gases emitted from combustion of motor vehicle and heating apparatus, especially near 1600-1800 LST and 2000-2100 LST, but at night, they had low concentrations, resulting from small consumptions of vehicle and heating fuels. When both moderate westerly synoptic-scale winds flow over Mt. Taegwallyang and easterly meso-scale sea breeze during the day, atmospheric pollutants should be trapped by two different wind systems, resulting in higher concentration at Kangnung city in the afternoon. At night, the association of westerly synoptic wind and land breeze can produce relatively strong winds and the dissipation by the winds cause these low concentrations to lower and lower, as nightime goes on. From March 27 through 28, an enforced localized windstorm could be produced along the lee side of the mountain near Kangnung, generating westerly internal gravity waves with hydraulic jump motions. Sea breeze toward inland appartantly confines to the bottom of the eastern side of the mountain, due to the interruption of eastward violent internal gravity waves. As the windstorm moves down toward the ground, an encountering point of two opposite winds approaches Kangnung, and a great amount of NO and $NO_2$ were removed by the strong surface winds. Thus, their maximum concentrations are found to be near 18 and 20 LST, 17 and 21 LST. In the nighttime, the more developed storm should produce very strong surface winds and the NO and $NO_2$ could be easily dissipated into other place. The $SO_2$ concentration had no maximum value, that is, almost constant one all day long, due to its removal by the strong surface winds. Especially, the CO concentrations were slightly lower during the strom period than both before or after the strom, but they were nearly constant without much changes during the during the daytime and nighttime.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.308-313
• /
• 2007

The small-loop electromagnetic technique has been used successfully for many geophysical qualitative investigations, particularly for shallow engineering and environmental surveys. Recently, various geophysical imaging methods based on numerical modeling and inversion have been tried in order to get more quantitative subsurface structure. However, conventional 2.5D small loop EM modeling takes a lot of time because responses should be calculated for several wave numbers and transformed into space domain. In this study, we developed a 2.5D HCP small loop EM modeling algorithm using extended Born approximation, which does not require transformation. Also, we checked its validity by comparison with other numerical results.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.381-392
• /
• 2006

The passive surface wave survey using microtremor is conducted in areas of crystalline rock basements to obtain average shear-wave velocity structures to 30 m deep (Vs30), on which the earthquake-resistant design standard is based. Test data were recorded at two sites with triangular and L-shaped arrays for 4 seconds with an sampling interval of 2 ms. The microtremor recorded at a site were analysed using the spatial autocorrelation method to obtain phase-velocity spectra and effects of major factors such as size and shape of away and number of record and receiver were examined. At the other site, shear-wave velocities were derived from VSP and microtremor data separately. The results from these two methods agree to each other reasonably well, indicating that the microtremor method can be an effective geophysical tool to measure Vs30.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.525-532
• /
• 2015

After comparing the effectiveness of standoff compensation between current techniques using data obtained from a series of borehole model experiments for standoff compensation in 2007, 2008, and 2009, a follow-up study was conducted to find a more effective standoff compensation algorithm, Comparing the results of the application of the conventional spine and ribs technique, and the spine and ribs technique in terms of apparent density shows that the standoff compensation error obtained from the latter method is more than twice that obtained from the former. The larger size of the compensation error from the spine and ribs plot using the radioactive decay equation indicates that there are no benefits in using this equation in standoff compensation. Based on these results, we propose a reverse transform spine and ribs technique by essentially combining the conventional spine and ribs technique and the spine and ribs technique in terms of apparent density.