• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.167-175
• /
• 2012

For establishing a standard of design element of the smart highway, this study investigated driver's anxiety EEG according to running speeds and geometric designs. Also, the experiment was implemented on 60 subjects. Based on running speed data and brainwave data, which were obtained from the experiment, this study analyzes anxiety EEG according to running speeds and geometric designs, and finally draws a forecasting model of anxiety EEG by selecting affecting factors of anxiety EEG. Forecasting model shows that left curve is the most influential on anxiety EEG figure. The reason is because when driver is driving on the first-lane, his or her visibility is impeded by a median strip. For this reason, anxiety EEG figure increases. And also steep downward slope and large radius of curve are heavily influential on driver's anxiety EEG figure. It is judged that anxiety EEG figure is increased by high speed on those section. Thus, the forecasting model of anxiety EEG suggested on this study will be utilized for design phase, and will decide the design speed on the superhighway. So, it will be used to make practical and safety road.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.363-367
• /
• 2022

Transparent ZnO/Ti/ZnO (ZTZ) tri-layered films were prepared with radio frequency (RF) and direct current (DC) magnetron sputtering on the glass substrate. The thickness of the ZnO and Ti films was kept at 50 and 10 nm to consider the effect of the electron irradiation on the crystallization and optoelectrical properties of the films. From the XRD spectra, post-depostion electron irradiated films showed the characteristic peaks of ZnO(002) and Ti(200), respectively. the observed grain size of the ZnO(002) and Ti(200) enlarged up to 18.27 and 12.16 nm at an irradiation condition of 750 eV. In the figure of merit which means an optoelectrical performance of the films, as deposited films show a figure of merit of 2.0×10^-5 𝛺^-1, while the films electron irradiated at 750 eV show a higher figure of merit of 5.7×10^-5 𝛺^-1.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.1-30
• /
• 1991

The lubrication state between contacting bodies with rolling and sliding under loaded condition is generally understood by the conception shown in Figure 1. When the lubricating oil film formation between facing bodies is good enough to separate these bodies by the hydrodynamic pressure, this state is called by the expression of "hydrodynamic lubrication". The thickness of oil film is so large that the lubricating oil between facing bodies behaves as fluid and metal-to-metal contact between surface roughness asperities on facing bodies does not occur. When the oil film thickness becomes thinner or when the surface roughness height becomes larger, top of surface roughness asperities on facing bodies reaches very near to each other and there the oil or absorbed oil molecules on the surface of facing bodies behave no more as fluid. Partly metal-to-metal contact of surface roughness asperities occurs. Such lubrication state is called by the expression "mixed-lubrication". When the oil film thickness becomes more thinner or surface roughness height becomes larger, metal-tometal contact or contact via absorbed oil molecules dominate at most of the part in contact zone. Such state is called by the expression "boundary lubrication". Schematic representation of these three regimes of lubrication is shown in Figure 1.rication is shown in Figure 1.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.63-63
• /
• 2009

In this work, we demonstrate 800V 4H-SiC power DMOSFETs with several structural alterations to observe static DC characteristics, such as a threshold voltage ($V_{TH}$) and a figure of merit ($V_B^2/R_{SP,ON}$). To optimize the static DC characteristics, we consider four design parameters; (a) the doping concentration ($N_{CSL}$) of current spreading layer (CSL) beneath the p-base region, (b) the thickness of p-base ($t_{BASE}$), (c) the doping concentration ($N_J$) and width ($W_J$) of a JFET region, (d) the doping concentration ($N_{EPI}$) and thickness ($t_{EPI}$) of epi-layer. Design parameters are optimized using 2D numerical simulations and the 4H-SiC DMOSFET structure results in high figure of merit ($V_B^2/R_{SP,ON}$>~$340MW/cm^2$) for a power MOSFET in $V_B{\sim}1200V$ range.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.499-504
• /
• 2001

We evaluated the degree of texture through depth of the superconductor core of Bi-Sr-Ca-Cu-O(BSCCO) superconductor tape. The degree of texture was characterized by pole figure analysis indicating that the degree of texture varied significantly with depth of the superconductor core. It was observed that the degree of texture was higher near the interface than inside the superconductor core. Specifically, as getting near to the center from the sheath/core interface, the orientation of BSCCO became dispersed from normal direction(ND) which, in turn, resulted in the degradation of <001>-fiber texture. In addition, the <001> texture was non-uniform an, better texture was developed along rolling direction(RD), compared to transverse direction(TD). Microstructural investigation showed that grain alignment was locally degraded by the existence of second phases. I was observed that larger grain size and better texturing were developed near the relatively straight interface compared to those inside the superconducting core. Based on our study, the region near the interface is thought to carry significant current compared to that inside the core.

• The Journal of Korean Physical Therapy
• /
• v.24 no.5
• /
• pp.325-333
• /
• 2012

Purpose: The purpose of this study was to determine the concurrent validity between Figure-of-8 Walking Test (F8W), Berg Balance Scale (BBS), Four Squared Step Test (FSST), and Timed UP and GO Test (TUG) in patients with stroke. Methods: Forty two participants (26 men, 16 women, $55.0{\pm}11.72$) with at least three months post stroke who were able to walk at least 10 m without walking aid participated in this study. Assessment of concurrent validity between the F8W (time and steps) and BBS was performed using Spearman rank order correlation and between the F8W (time and steps), FSST and TUG assessed using Pearson correlation. Results: The time of the F8W showed correlation with BBS (r=-0.46, p<0.01), FSST (r=0.64, p<0.01), and TUG (r=0.81, p<0.01), and steps of the F8W showed correlation with BBS (r=-0.43, p<0.01), FSST (r=0.47, p<0.01), and TUG (r=0.51, p<0.01). Conclusion: The F8W is a valid measure of balance and walking skill among patients with stroke and may provide complementary information with regard to dynamic balance and functional walking for the real life of stroke patients.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.111-122
• /
• 1992

Studying the dress style of the Buddhist Goddess of Mercy SU WOL KWAN EUM DO (Drawings on the Buddhist Goddess of Mercy who is watching the Moon reflected in the still water), it is composed of a splendid, jewel crown with five colors, a light and flimsy, non-colored veil with many kinds of gold·plated patterns. This gold·plated carapace figures on a scarlet ground are drawn on the veil and the oval-type flower figures mixed with a scarlet lotus blossom ard arranged. An arabesque pattern of BOSANGHWA (an imaginary, Buddhistic flower figure) is mainly used for both line decorations and necklace. Like this, various kinds and types of figures are in harmony in spite of many changes in figure design. The SU WOL KWAN EUM DO in Koryo dynasty is full of colorful, subtle, harmonious figures which are unique style, which cannot be found in japan, China, and so on. In other words, most of most of dress patterns which are shown in SU WOL KWAN EUM DO are China ink paintings with mountains and waters as its setting. In case of color painting, figure designs are seldom used. The dress pattern in SU WOL KWAN EUM DO of koryo dynasty is characteristic of its variety and magnificent colors.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.6
• /
• pp.291-295
• /
• 2015

IGZO single layer and $IGZO/TiO_2$ bi-layered films were deposited on glass substrate at room temperature with radio frequency magnetron sputtering to investigate the effect of $TiO_2$ buffer layer on the electrical and optical properties of the films. For all deposition, the thickness of IGZO and $TiO_2$ Buffer layer was kept at 100 and 5 nm, respectively. In a comparison of figure of merit, IGZO films with a 5-nm-thick $TiO_2$ buffer layer show the higher figure of merit ($8.40{\times}10^{-5}{\Omega}^{-1}$) than that of the IGZO single layer films ($6.23{\times}10^{-5}{\Omega}^{-1}$) due to the enhanced optical transmittance and the decreased sheet resistance of the films. The observed results mean that a 5 nm thick $TiO_2$ buffer layer in the $IGZO/TiO_2$ films results in better electrical and optical performance than conventional IGZO single layer films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.81-85
• /
• 2017

$SnO_2/Ag/Nb_2O_5/SiO_2/SnO_2$ multilayer films were prepared on glass substrate by sequential using RF/DC magnetron sputtering at room temperature. The influence of top $SnO_2$ layer thickness on optical and electrical properties of the multilayer films was investigated. Experimentally measured results exhibit transmittances over 84.3 ~ 85.8% at 550 nm wavelength. As the top $SnO_2$ layer thickness increased from 40 to 55 nm, the sheet resistance (Rs) increased from 5.81 to $6.94{\Omega}/sq$. The Haacke's figure of merit (FOM) calculated for the samples with various $SnO_2$ layer thicknesses was a maximum at 45 nm ($35.3{\times}10^{-3}{\Omega}^{-1}$).

• Journal of The Korean Association For Science Education
• /
• v.16 no.3
• /
• pp.278-285
• /
• 1996

High school students' achievements in algorithmic problems, and figure-formatted and textual-formatted conceptual problems concerning stoichiometry, gaseous state, and solution, were measured by the Chemistry Problem Solving Ability Test. The relationships among the achievement scores in the three types of problems and cognitive variables such as logical thinking ability, mental capacity, and field dependence/field independence were examined. The portion of variance of explanation for each achievement score was also studied by a multiple regression analysis. The results showed that logical thinking ability was significantly correlated with the achievement score in the algorithmic problems, and accounted for the significant portion of the variance of the score. Mental capacity accounted for the significant portion of the variance of the score in the figure-formatted conceptual problems. Although field dependence/field independence was significantly correlated with all the achievement scores, it did not significantly account for any scores in multiple regression analyses. However, the magnitudes of correlation coefficients among the achievement scores were higher than those between the achievement scores and cognitive variables. The best predictor for each score was also found to be one of the other achievement scores. Educational implications are discussed.