• Journal of dental hygiene science
• /
• v.4 no.1
• /
• pp.21-25
• /
• 2004

In modern times, children's trauma is increasing every year because of car accidents and life environment changes. There is a limit to prevent traumatic damage for oral cavity organization. The fundamental data of trauma treatment and prevention will be presented through the survey and analysis of traumatic teeth damage. I examined 113 patients from Oct. 4th, 2000 to Feb. 27th, 2004 at Dept. of Children's Dental Clinic, Kangnung National University. The results are as follows. (1) The trauma frequency of male subjects is higher than that of female at a rate of 2.05:1. The average age is 5.27 for men and 5.27 for women. The highest percentage of trauma patients is among 2 year old children. It is 21.2%. (2) A patient survey was taken at a trauma treatment hospital. On the first day 34.4% of the patients had come to receive treatment of their first set of teeth. However, after a week, 38.8% of the patients had received treatment on their permanent teeth. (3) As a result of falling, 59% of patients needing treatment on their first set of teeth. 55.1% of patients is permanent teeth. As a result of bump against physical solid, 26.6% of patients is the first set of teeth and 26.5% of patients is permanent teeth. (4) Teeth damage happened at home. 42.1% were male. 35.1% were female. According to trauma, 59.4% of teeth damage happened at home. 28.6% of permanent teeth damage happened at school or kindergarten. (5) According to trauma, the number of teeth damaged was in the first set of teeth are as follows: 56.3%, one-31.3%, three or four-6.3% each. For permanent teeth: two-46.9%, one-28.6%, four over-16.3% and three-8.2%. Over four teeth is larger number for permanent teeth. (6) 56% of first set of teeth patients and 43.4% of permanent teeth patients were male. 56.8% of first set of teeth patients and 43.2% of permanent teeth were female. Trauma happened to both male and female frequently in the first set of teeth. (7) Most of the tooth damage which was in the first set of teeth and permanent teeth was done to the upper jaw. 75% of patients are the first set of teeth. 63.8% of patients are permanent teeth. Trauma is very high in the two mid teeth of the upper jaw. (8) According to trauma survey, 30.2% is from impulse. 28.0% is from crown fracture, 14.7% is from depression. 8.9% is from concussion. 7.1% is from full dislocation of a joint. 2.2% of patients are extrusion. 1.8% is from displacement. According to teeth damage trauma, 35.8% is pulse in the first set of teeth. The breaking of the crown of a tooth happened a lot in permanent teeth. (9) According to data, 43.2% of teeth damage in the first set of teeth goes without treatment. In permanent teeth, it is 38.9%. After treatment, 22.0% of first set of teeth treatment requires a dental pulp treatment. In permanent teeth, which is used for temporary acid etching resin restoration.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.3
• /
• pp.239-248
• /
• 2010

This paper describes a collaborative project between academia and industry which focused on improving the marketing and product development strategies for two private label apparel brands of a large regional department store chain in the southeastern United States. The goal of the project was to revitalize product lines of the two brands by incorporating student ideas for new solutions, thereby giving the students practical experience with a real-life industry situation. There were a number of key players involved in the project. A privately-owned department store chain based in the southeastern United States which was seeking an academic partner had recognized a need to update two existing private label brands. They targeted middle-aged consumers looking for casual, moderately priced merchandise. The company was seeking to change direction with both packaging and presentation, and possibly product design. The branding and product development divisions of the company contacted professors in an academic department of a large southeastern state university. Two of the professors agreed that the task would be a good fit for their classes - one was a junior-level Intermediate Brand Management class; the other was a senior-level Fashion Product Development class. The professors felt that by working collaboratively on the project, students would be exposed to a real world scenario, within the security of an academic learning environment. Collaboration within an interdisciplinary team has the advantage of providing experiences and resources beyond the capabilities of a single student and adds "brainpower" to problem-solving processes (Lowman 2000). This goal of improving the capabilities of students directed the instructors in each class to form interdisciplinary teams between the Branding and Product Development classes. In addition, many universities are employing industry partnerships in research and teaching, where collaboration within temporal (semester) and physical (classroom/lab) constraints help to increase students' knowledge and experience of a real-world situation. At the University of Tennessee, the Center of Industrial Services and UT-Knoxville's College of Engineering worked with a company to develop design improvements in its U.S. operations. In this study, Because should be lower case b with a private label retail brand, Wickett, Gaskill and Damhorst's (1999) revised Retail Apparel Product Development Model was used by the product development and brand management teams. This framework was chosen because it addresses apparel product development from the concept to the retail stage. Two classes were involved in this project: a junior level Brand Management class and a senior level Fashion Product Development class. Seven teams were formed which included four students from Brand Management and two students from Product Development. The classes were taught the same semester, but not at the same time. At the beginning of the semester, each class was introduced to the industry partner and given the problem. Half the teams were assigned to the men's brand and half to the women's brand. The teams were responsible for devising approaches to the problem, formulating a timeline for their work, staying in touch with industry representatives and making sure that each member of the team contributed in a positive way. The objective for the teams was to plan, develop, and present a product line using merchandising processes (following the Wickett, Gaskill and Damhorst model) and develop new branding strategies for the proposed lines. The teams performed trend, color, fabrication and target market research; developed sketches for a line; edited the sketches and presented their line plans; wrote specifications; fitted prototypes on fit models, and developed final production samples for presentation to industry. The branding students developed a SWOT analysis, a Brand Measurement report, a mind-map for the brands and a fully integrated Marketing Report which was presented alongside the ideas for the new lines. In future if the opportunity arises to work in this collaborative way with an existing company who wishes to look both at branding and product development strategies, classes will be scheduled at the same time so that students have more time to meet and discuss timelines and assigned tasks. As it was, student groups had to meet outside of each class time and this proved to be a challenging though not uncommon part of teamwork (Pfaff and Huddleston, 2003). Although the logistics of this exercise were time-consuming to set up and administer, professors felt that the benefits to students were multiple. The most important benefit, according to student feedback from both classes, was the opportunity to work with industry professionals, follow their process, and see the results of their work evaluated by the people who made the decisions at the company level. Faculty members were grateful to have a "real-world" case to work with in the classroom to provide focus. Creative ideas and strategies were traded as plans were made, extending and strengthening the departmental links be tween the branding and product development areas. By working not only with students coming from a different knowledge base, but also having to keep in contact with the industry partner and follow the framework and timeline of industry practice, student teams were challenged to produce excellent and innovative work under new circumstances. Working on the product development and branding for "real-life" brands that are struggling gave students an opportunity to see how closely their coursework ties in with the real-world and how creativity, collaboration and flexibility are necessary components of both the design and business aspects of company operations. Industry personnel were impressed by (a) the level and depth of knowledge and execution in the student projects, and (b) the creativity of new ideas for the brands.

• Journal of dental hygiene science
• /
• v.5 no.2
• /
• pp.45-49
• /
• 2005

This study is designed to present basic materials necessary for offering the more effective way of dental hygienists, or those who are in charge of the education of Oral health, the treatment and prevention of dental problems, educating Oral health by stage by dint of determining the actual condition of the knowledge and management of dental hygiene, or prevention of the basic dental disease except the professional methods of dental management and evaluating their abilities to manage dental hygienes. In terms of the real conditions of the management of dental hygienes, the majority of the subjects said, "not bad" or "healthy". Most of them (62.1%) said that they brush their teeth three times a day, and most of them (85.2%) depend on rolling methods. 69.2% of them used brushes that are neither hard nor soft, and 28.4% of them use soft brushes and 49.7% of them brush their teeth for about 3 minutes. In terms of brushing time, 27.8% of them brush their teeth after lunch, while 23.8% of them brush their teeth after breakfast. 66.3% of them use fluoric tooth pastes while 19.5 percent of them said, "I have no idea." and 14.2% of them said, "No." In terms of complementary dental hygiene goods, dental goggles are used by 23% of them, and dental threads are used by 78.1% and tooth brushes are used by 78.1% of them, and 42.4% of the subjects use the instruments one to twice a day, and 53.8% of them use them for less than one minute a time. In terms of dental health care, 17.2% of them have a chew of gum and 8.3% of them pay a regular visit to dental clinics and 5.3% of them don't smoke.

• Journal of muscle and joint health
• /
• v.5 no.2
• /
• pp.238-252
• /
• 1998

Reumatic arthritis is a disease with joint pain being one of the key symptoms. The patient suffers from the pain, stiff sensation and edema due to the inflammation taking Place In one or more joints. Accompanying these problems are fatigue, unusual exhaustion, fever, tachycardia and weakness. Inaddition, joints are often deformed and muscles shrink along with the progress of edema, coupled with depression and psychological instability resulting from the loss of the mobile function and limitations on the daily life. Some patients become fed up with the long and hard flight with the disease and just give up, which aggravates the symptoms. Others come to the hospital only when the conditions have become serious. We need to prevent these and guide the patients in the right direction. Against this backdrop, this study aims to look into the relations between the knowledge on the part of the patients together with their feeling of self-efficacy and the compliance. The results are expected to help the patients improve their life, In addition to providing useful materials for setting up appropriate plan for nursing intervention. The study was conducted by distributing questionnaire to 88 patients selected from the out-patient department of a university hospital in Inchon, from April 6 to 27, 1998. The following tools were used the yardstick of self-efficacy, developed in 1997 by the Society for the Health of Rheumatism Patients, was used for measuring the levels of knowledge and the feeling of self-efficacy. The degree of compliance was measured by the data collected from documents in addition to the results of the analysis of the interviews with the patients. The reliability of the tools was confirmed. In the analysis, the general characteristics were expressed in figures and percentages. The levels of knowledge, feeling of self-efficacy, and compliance were expressed in the average values and standard deviations. The relations among the variables following the general characteristics were analysed by the t-test and one-way ANOVA. The Pearson correction coefficient was used for the analysis of factors. Multiple-loop analysis was used to identify the variables affecting the compliance. The following are the results of this study. 1. Among the 88 patients, 18 were men and the remaining 70 were women, with a ratio 1 : 3.87. Regarding the age groups, 23 were between 50 and 59 years old, with those between 50 and 69 accounting for 51.1% of the total. High school graduates or higher amounted to 58%. Religious patients was 67% or 59 persons. Fifty nine percent were unemployed, and 58.3% (49 persons) had two children or fewer. The period of suffering from rheumatism varied between 2 months and IS years, with 70% less than years. 2. The average figure In relation to the of knowledge was 17.63 points over 30 or 58. 76%, which means a medium level. 3. The average figure of the feeling of self-efficacy was 60.06 points. 4. The level of compliance was 3.26, which was above average. 5. The relation between the feeling of self-efficacy and compliance showed an "r" value of 0.37, which was significant. It means that the higher the feeling, the greater the compliance points. 6. The analysis of the knowledge level revealed that the difference is found only between the college graduates and junior-high graduates or lower. 7. The feeling of self-efficacy varied along with the age and education level. 8. The general characteristics of patients as discussed above did not show significant difference with the compliance. 9. Regarding the elements influencing the compliance, the number of children, period of suffering, income, age, feering of self-efficacy, knowledge, and compliance had 54% of significance. In conclusion, rheumatism victims can lead a better life if they are appropriately educated, based on efficient training program from the early days of the disease ; if they become able to manage themselves thanks to the training ; and if they are helped by a program focusing on the increase of the feeling of self-efficacy aimed at changing patient's behavior.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.3
• /
• pp.71-83
• /
• 2018

Recently, there are many efforts to define the field of entrepreneurship as an area of independent study. According to Shane & Venkataraman, the study of entrepreneurship is moving toward understanding the combination of entrepreneurial individual and valuable opportunity in becoming entrepreneurs. In Korea, entrepreneurship education is spreading widely on the basis of universities and in 2010 the entrepreneurship major was created in Sookmyung Women's University for the first time in Korea. The results of this study are as follows. First, there are many research about examining the relationship between entrepreneurship education and entrepreneurship intention. Nevertheless, there are lack of the study focusing on the opportunity recognition which many scholars have recognized as the independent study field of entrepreneurship domain. Therefore, the purpose of this study is to examine the effect of satisfaction of entrepreneurship major education on entrepreneurial opportunity recognition and to examine the mediating effect of entrepreneurial opportunity recognition according to educational commitment. The questionnaires were carried out for 3 weeks to entrepreneurship major students in Sookmyung Woment's University. A total of 84 surveys were collected and statistically analyzed by the R program. As a result of the analysis, it was found that the satisfaction of education positively influences the recognition of entrepreneurial opportunities. Commitment also has a full mediating effect on the recognition of entrepreneurial opportunities. The results of this analysis confirm that the ability to recognize entrepreneurial opportunity is developed by entrepreneurship education, and during the study students' commitment has an important role in the relationship between educational satisfaction and entrepreneurial opportunity recognition. The results were verified through empirical analysis. Satisfaction with entrepreneurship education and awareness of entrepreneurship opportunities through entrepreneurship can be anticipated as entrepreneurship activities in the future.

• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.127-134
• /
• 2015

This study was designed to determine the prevalence of gallstones in the last three years and evaluate the associated risk factors in the population who underwent health screening. Although there are many studies reporting the prevalence and risk factors of GB polyp, the results varied among each report. The aims of this study were to evaluate the prevalence rate and risk factors of GB polyp, colon polyp and fatty liver in the population who underwent health screening. The study population consisted of 4,877 visited the health promotion center in Dalseogu, Daegu in Korea from January 2011 to December 2013. Each participant in the study had their biliary system gallbladder examined using ultrasonography. The prevalence of GB polyp was evaluated along with age, gender, metabolic syndrom, body mass index (BMI), Fatty liver, Colon polyp. A showed of total 383 (7.9%) people were found to have GB polyps. The prevalence of sex among 256 (9.8%) patients men and 127 (5.6%) women which showed significantly higher in male than in female subjects(p=0.001). The mean size of the GB polyps 4.92 mm (1.6-17 mm). The sizes of most GB polyps (73.6%) were less than 10 mm in diameter. 122 subjects (31.28%) had multiple GB polyps which 2 or more polyps and 261 subjects (68.2%) had single polyp. Independent risk factors related with GB polyp were male gender (OR 0.551, p<0.001), overweight that BMI above $23kg/m^2$ (OR 0.713, p=0.002) triglyceride (OR 0.571, P<0.001), metabolic syndrome (OR 0.049, p=0.033) and colon polyp (OR 1.409, p=0.002). In spite of the conclusion, the prevalence GB polyp was higher than previous Korea and other country reports. The GB polyp in a healthy population was results as 7.9%. The risk factors of GB polyps were found to be male, being overweight, triglyceride, metabolic syndrome and colon polyp. Not only the subject of a health examination is needed but, a further study of the general public when possible.

• Korean Journal of Ichthyology
• /
• v.1 no.1_2
• /
• pp.73-82
• /
• 1989

The development of eggs and larvae, and minute scale-like tubercles on the skin surface of the larval Acanthorthodeus asmussi from Korea were observed in the laboratory. The egg was nearly ovoid-shaped. The number of egg averaged 195 per an oviposition. The morphological character of larval development was relatively similar to those of Acheilognathus tabira tabira, A. tabira subsp. (a), A. yamatsutae, A. moriokae, A. cyanostigma and A. rhombeus. The larvae of this species had many scale-like tubercles ellipsoided in a diagonal cross section on the skin surface of the body. And also this species moved like incessant wiggly movement pattern as that of fly maggot duing the larval development. As regards the tubercles and larval movement pattern, the larvae of A. asmussi shared similar characters with those of Acheilognathus rhombeus, A. longipinnis and Pseudoperilampus typos. Hence A. asmussi may be closely related to these species. The latter three species are autumn-spawning bitterlings and the larval development always retard in a certain stage, while A. asmussi is a spring-summer spawning species and the larval development never retards. Judging from these facts, it should be considered that there are close relations in evolutionary trend between the two spawning species.

• Journal of Food Hygiene and Safety
• /
• v.16 no.3
• /
• pp.168-177
• /
• 2001

Sanitary management practices were assessed to insure the safety of school foodservice, to prevent the outbreak of foodborne illness, and to improve the quality of school foodservice. To accomplish these objectives, a survey was conducted and analyzed on elementary and high school foodservice operations located in Seoul area. A Questionnaire from based on HACCP standards was developed and used for self-reported evaluation of the school foodservice managers on their sanitary management practices. The results were analysed by examining their activities and identifying weaknesses in those activities. The questionnaire was composed of three sectors with all 53 questions; 33 questions for time-temperature management, 5 for personal hygiene and 15 for equipment/facility sanitation. Five-point-scale was used on the questionnaire answers. Among the schools responded,253 (98.4% of the total) were elementary schools and 19 (1.6%) were high schools. Among the three sectors, personal hygiene performance was mostly well conducted by marking average 4.06$\pm$0.57. Equipment/facility sanitation came next by marking average 3.84$\pm$0.53. Time-temperature marked average 3.45$\pm$0.46. “Storage after cooking (2.03$\pm$0.94)”was identified as the least managed activities because the school foodservice operations were not equipped well with hot holding and/or cold holding. “Separate use of sink per usage (3.03$\pm$1.10)” and “proper location of hand washing facility (3.07$\pm$1.13))” were identified as the least practiced activities in equipment/facility sanitation sector. To enhance these practices, proper number of sinks and hand washing facilities should be equipped first within the kitchen area.

• Journal of Food Hygiene and Safety
• /
• v.13 no.3
• /
• pp.278-293
• /
• 1998

The purposes of this study were to develop Hazard Analysis Critical Control Point-based standardized recipe applicable to cook/chilled Broiled Spanish Mackerel in school foodservice operations and to establish reasonable shelf-life limits by assessing food quality during chilled storage period of 5 days. HACCP for the production of menu items was identified in simulation study. At each critical control point, time-temperature profile was recorded and microbiological analysis was done. Also chemical analyses and sensory evaluation were conducted for 5 days of chilled storage. The results of time-temperature measurement of Broiled Spanish Mackerel by each production phase showed satisfactory condition that met the standards. Broiled Spanish Mackerel showed excellent microbiological quality from raw ingredient phase ($TPC:2.58{\pm}0.12\;Log\;CFU/g$) to holding phase ($TPC:2.70{\pm}0.42\;Log\;CFU/g$). Coliform (0.84 Log MPN/g) and fecal coliform (0.84 Log MPN/g) were detected from marinating phase ($TPC:3.82{\pm}0.52\;Log\;CFU/g$). After heating, only few mesophiles were detected ($TPC:1.83{\pm}0.49\;Log\;CFU/g$). No psychrophiles, coliforms and fecal coliforms were detected. In the phases after rapid chilling, during chilled storage and after reheating and distribution, almost none of the above microbes were detected. Salmonella and Listeria monocytogenes were not detected in all production phases. The pH immediately after cooking was 6.65 and then increased significantly to 6.81 on the third day of chilled storage (p<0.001). Acid value did not show significant changes while total volatile based nitrogen (TVBN) dramatitically increased during storage periods (p<0.01). In the result of sensory evaluation, general acceptability points had been rated high in the first day of storage, and then, the points were decreased significantly on the third day (p<0.05). General acceptability points ranged from 8.86 to 10.68. Accordingly, Broiled Spanish Mackerel is highly recommendable cook/chill system. Considering the DHSS standards for storage, the ideal shelf-life recommended for Broiled Spanish Mackerel is within 4 days excluding cooking day. For Broiled Spanish Mackerel, critical control points were purchasing and receiving of frozen Spanish Mackerel, heating, chilling, chilled storage, reheating and distribution.

• Journal of Nutrition and Health
• /
• v.44 no.3
• /
• pp.243-254
• /
• 2011

The purpose of this study was to investigate the general characteristics, body shape, and perceptions of weight control in individuals consuming functional health foods and weight-control foods. The survey was conducted between April 15 and June 17, 2010 among 199 (57 males and 142 females; age range, 25-45 years) in Seoul and Gyeonggi-do, who experienced eating functional health foods or weight control foods during the past year (June 2009 to June 2010). The subjects were divided into a weight-control food group (89 adults) and a functional health food group (110 adults). The subjects were comprised of a high proportion of aged (average age, $34.2{\pm}5.9$ years), graduates (71.9%), and married (65.8%) individuals. In the weight control food group, gender, age, and educational background were similar and the ratios of service/technical employees, college students, and normal-weight individuals [body mass index (BMI), < 23] were high. BMI was significantly different by gender (p < 0.001), age (p < 0.01), marital status (p < 0.001), and job type (p < 0.001). Self-perceived health status showed a higher response for "in good health" in the 35-44 year old group than that in the 25-34 year old group (p < 0.05). Male group satisfaction for body shape was significantly higher than that in the female group. The main reason for going on a diet was significantly different by gender (p < 0.05) and BMI (p < 0.01). The main motives for dieting were "because I am not at an ideal weight" and "because of the social atmosphere and the attention of others " in men, but "can't wear the clothes I want" in women (p < 0.01). The most preferable product type related to the two groups was significantly different by job (p < 0.001) and BMI (p < 0.05). However, no significant differences were observed for questions about body shape perception and weight control. Consumers who had different general characteristics and used diet products perceived body shape and weight control differently. Additionally, no meaningful differences were observed when the results were categorized by product type, except job and BMI, but the distribution of consumer characteristics showed different tendencies. These results can be utilized as basic data for developing new diet products to help people control their weight more scientifically and appropriately in the future.