• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.135-144
• /
• 2002

Fabrication of high strength structural concrete was investigated by using a mechanochemically Surface Treated Fly Ash(MSTFA) induced by mechanochemical processing through ball-milling of (90 wt% As Recevied Fly Ash(ARFA) + 10wt% cement) mixture, which was compared to the specimen fabricated by using As Received Fly Ash(ARFA) in terms with compressive strength and microstructures. The compressive strength of concrete specimen fabricated by using MSTFA represented 10-20% and 2-7% higher value than that for the case of using ARFA and BPFA in each cases. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity generated between cement and fly ash during mechanochemical processing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.81-88
• /
• 2005

The fly ash has been widely used in the latest to complement the performance and economical efficiency of the concrete which uses only a normal portland cement, the pulp ash gained through the incineration of paper sludge is possible to be used as the material of concrete because it contains the properties similar to the previous fly ash in ingredients and physical characteristics. Therefore, this research has tested physical characteristics by replacing 20% of fly ash used with the paper ash to solve the problem which lowers the early strength caused when the fly ash was used. As a result, it showed that the fluidity becomes lower and the compressive strength becomes increased by using paper ash. In addition, after mixing the paper ash with the fly ash, it showed that time and heating amount of the 2nd peak of the minor heat of hydration affecting the revelation of strength was equivalent to the combination for normal portland cement, and also indicated that the compressive strength for 3 days is superior to the combination of the fly ash. Therefore, if the paper ash having a regular fineness is used, it was effective in improving the early strength of concrete used the fly ash.

• Mycobiology
• /
• v.42 no.4
• /
• pp.391-396
• /
• 2014

In the past two decades, European ash trees (Fraxinus spp.) have been severely damaged due to ash dieback disease, which is caused by the fungal species Hymenoscyphus fraxineus (Chalara fraxinea in the anamorphic stage). Recent molecular phylogenetic and population genetic studies have suggested that this fungus has been introduced from Asia to Europe. During a fungal survey in Korea, H. fraxineus-like apothecia were collected from fallen leaves, rachises, and petioles of Korean ash and Manchurian ash trees. The morphological and ecological traits of these materials are described with the internal transcribed spacer rDNA sequence comparison of H. fraxineus strains collected from Korea, China and Japan.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.260-265
• /
• 2012

Soil respiration under flooded conditions is considered to be very small compared with aerobic soil respiration of soil organic matter. However, anaerobic decomposition of soil plays a key role in carbon cycling in flooded ecosystems. On the other hand, coal-ash wastes, such as fly ash and bottom ash, are known to function as a soil amendment for mitigating $CO_2$ emission and enhancing carbon sequestration in up land soils. In this study, we investigated bottom ash as a soil amendment for mitigating $CO_2$ emission, and thus enhancing carbon sequestration under anaerobic conditions. We observed that amendment of bottom ash without external organic source led to significant reduction in $CO_2$ emission rate and in total cumulative $CO_2$ emission flux over the incubation period, which was proportional to the amount of bottom ash applied. We also found that soil microbial biomass increased in response to application of bottom ash. These results suggest that bottom ash can be utilized to store $CO_2$ as a stable soil organic carbon in flooded ecosystems, as in aerobic situations.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.247-252
• /
• 2017

The aim of this research is the feasibility analysis of the reject ash premixed cement mortar with combined aggregate. Namely, for the combined aggregate with two different qualities of aggregates, a fundamental properties of cement mortar was evaluated depending on various replacing ratios of reject ash(Ri). According to the experimental results, the combined aggregate consisted with low-quality aggregate and sea sand did not change the flow value depending on the reject ash while the combined aggregates consisted with low quality aggregate and sea sand; and consisted exploded debris sand and sea sand the increasing reject ash increased the air content with increased replacing ratio of reject ash. In the case of compressive strength, as the replacing ratio of reject ash was increased, the compressive strength was increased. It is considered that when 5% of reject ash replacing ratio made similar quality of cement mortar with favorable quality aggregate, hence, it can be suggested that 5% replacement of reject ash for desirable fluidity and compressive strength of concrete.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.92-101
• /
• 1997

This study was conducted to investigate the effect of fly ash on the yield and quality and to determine the optimum application amount of fly ash for tobacco(Nicotiana tabacum L). Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 20, 40, 60 MT/ha. Dry weights of tobacco at middle and topping growth stage were increased with application of fly ash, showing the highest dry weight at 40 MT/ha in both kinds of fly ash. It was showed that the bituminous coal had a little more effective for yield than that of anthracite. Comparing with the control, yields of tobacco applied with fly ash were significantly increased about 17.7% and 17.1% by the application of bituminous coal and anthracite, respectively. Quality of flue-cured leaves was better by application of fly ash than that of the control. The quality index was given the highest at 40 MT/ha for bituminous coal increasing by 24.6% and at 60 MT/ha fur anthracite increasing by 13.4% compared with the control. The economical efficiency considered of the yield and quality of tobacco was the highest at 40 MT/ha of bituminous. Soil pH, contents of available P2O5, organic matter, exchangeable Ca2+ and Mg2+ of soil during the growing season were increased by application of fly ash, showing more effectiveness in bituminous than that in anthracite. By the application of fly ash, the nutrients availability and the acidity of soil were reformed and they caused significantly the increase of growths yield, and quality of tobacco. By the application of lime reforming soil acidity, growth response, yields and quality of tobacco were not increased compared to the control, although the effect of reforming soil pH was remarkable.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.63-79
• /
• 2011

In this study relative density tests of bottom ash and standard sand were carried out. And cyclic triaxial tests for samples with the relative density of 40%, 55%, and 70% were carried out on the basis of the test results. Cyclic triaxial tests were also conducted for fines content with 55% relative density. Residual samples were divided into No.40, No.60, No.60, and No.100, and No.200. In order to avoid crashing that can happen when compaction of the sample is initiated, bottom ash was crushed using the a compact mold. In consideration of the crushing characteristics of each residual samples, the fragmentation rate increased up to 30%, which led to the adjustment of fine-grained amount to 10%, 20%, and 30%. Through the repative triaxial test in accordance with the relative density, resistant characteristics of the liquefaction of bottom ash was analyzed. Test results show that, crushing strength of bottom ash was smaller than that of standard sand, resulting in different liquefaction behavior characteristics. And we could find fines content with maximum resistant characteristics of the liquefaction.

• Korean Journal of Poultry Science
• /
• v.33 no.1
• /
• pp.65-80
• /
• 2006

Ash amendment to manure holds potential as a method to neutralize manure for reducing odor and reduce phosphorus (P) solubility in runoff from fields where manure has been applied. This review focuses on the literature published about ash characteristics and their environmental uses. There is no uniform physico-chemical definition of the selected ashes (coal fly ash-CFA, wood ash-WA, and rice hull ash-RHA) used in various studies. These ashes vary greatly in their acidity (pH<6.0) or alkalinity (pH>12.5) based on the conditions at which they were farmed and the composition of the ash source. CFA amendment to manure reduced manure-P solubility and application of CFA amended manure to agricultural soils is a method to improve water quality WA may prove to be a valuable manure odor control amendment since WA contains a high level of carbon. A major biomass source is rice hull (husk) which provides an ash source (RHA). The .ice hull and RHA are sources of silica, compromising about 20% and 60%, respectively. So far research has been directed at the use of CFA, WA and RHA as soil amendments, but there is potential use of these materials as manure additives to sequester P and reduce odors.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1164-1170
• /
• 2002

The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using coal as fuel, containing free carbon of 8∼9 wt%. The starting natural materials were mixed with 5 different proportions of fly ash, pressed and then sintered at 1050, 1100, 1150 and 1200${\circ}C$. With sintering temperature, water absorption decreased and compressive strength increased. When specimens were sintered at the temperature lower than 1100${\circ}C$, water absorption increased and strength decreased with fly ash content. In contrast, when sintering was done at the temperature higher than 1150${\circ}C$, water absorption increased with fly ash content similarly but strength was improved.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.67-73
• /
• 2002

The carbon-in-ash system for simultaneously monitoring the unburned carbon in fly ash produced in a coal-fired power plan is designed and evaluated using the domestic fly ash produced in the coal-fired power plant. Real time monitoring is very important to control the combustion of the boiler in the coal-fired power plant and the purification system for fly ash recycling. The carbon-in-ash system based on the capacitance measurement consists of a LCR meter, a duct collector and an electrode cell. The capacitance of fly ash increases linearly with increasing fly ash carbon contents. The water content in fly ash plays an important role on the ash capacitance. The empirical equation for predicting the content of unburned carbon in fly ash produced in the domestic Boryung, Hadong and Samchenpo coal-fired power plants can be derived in the range of carbon content 0-20%.