Study on the Hydration and Strength Properties of Fly-ash Modified Cement Paste and Mortar Using a CSA and Pulp Ash

CSA 및 제지애쉬를 혼합재료 사용한 플라이애쉬 시멘트 모르타르의 수화 및 강도 특성에 관한 연구

  • Song, Tae-Hyeob (Korea Institute of Construction Technology Building Research) ;
  • Lee, Sea-Hyun (Korea Institute of Construction Technology Building Research) ;
  • So, Chee-Ho (Dept. of Architectural Engineering, Konkuk University)
  • 송태협 (한국건설기술연구원 건축연구부) ;
  • 이세현 (한국건설기술연구원 건축연구부) ;
  • 서치호 (건국대학교 건축공학과)
  • Received : 2005.10.05
  • Accepted : 2005.11.09
  • Published : 2005.12.15

Abstract

The fly ash has been widely used in the latest to complement the performance and economical efficiency of the concrete which uses only a normal portland cement, the pulp ash gained through the incineration of paper sludge is possible to be used as the material of concrete because it contains the properties similar to the previous fly ash in ingredients and physical characteristics. Therefore, this research has tested physical characteristics by replacing 20% of fly ash used with the paper ash to solve the problem which lowers the early strength caused when the fly ash was used. As a result, it showed that the fluidity becomes lower and the compressive strength becomes increased by using paper ash. In addition, after mixing the paper ash with the fly ash, it showed that time and heating amount of the 2nd peak of the minor heat of hydration affecting the revelation of strength was equivalent to the combination for normal portland cement, and also indicated that the compressive strength for 3 days is superior to the combination of the fly ash. Therefore, if the paper ash having a regular fineness is used, it was effective in improving the early strength of concrete used the fly ash.

플라이애쉬를 콘크리트 혼화재로 사용할 경우 수화열의 저감, 내화학성의 증대, 건조수축의 저감, 장기강도의 개선 등의 여러 가지 장점이 있으나, 3일 이내의 초기강도 발현이 낮은 점과 성분중의 미연탄소분의 영향으로 인하여 AE제 흡착에 의한 공기량의 변동 등의 몇 가지 이유로 인하여 일부 공사를 제외하고는 일반적으로 10% 전후만을 사용하고 있다. 본 연구에서는 플라이애쉬 사용량을 시멘트량의 최대 30%까지 치환하고, 이때 발생할 수 있는 초기강도를 개선하기 위하여 무기질계 혼합재인 CSA 및 제지애쉬를 플라이애쉬 사용량의 8, 20%를 혼합하여 조기강도 특성 및 미소수화열 발생에 의한 조기강도 개선 가능성에 분석을 하였다. 미소수화열 측정결과 플라이애쉬를 10, 20, 30% 치환한 경우 강도에 영향을 줄 수 있는 제 1 Peak의 발열량 및 발현 시간이 OPC 배합보다 낮고 늦게 나타나고 있으며, CSA 및 제지애시를 혼입할 경우 발열량이 증가하고 시간도 단축되는 것으로 나타났다. 특히 제지애시를 혼합할 경우 강도에 영향을 줄 수 있는 제 2 Peak의 발현 시간 및 발열량이 OPC와 유사한 것으로 나타났다. 응결시간의 경우 CSA 및 제지애시를 혼입할 경우 플라이애쉬 배합보다 단축되는 것으로 나타났으며, 이는 미소수화열 발열량과 상관성이 있는 것으로 나타났다. 압축강도의 경우 플라이애쉬 배합에 CSA 및 제지애시를 혼입항 경우 조기강도 증진효과가 있는 것으로 나타났으며, 특히 제지애시를 혼입할 경우 강도 증진이 효과적으로 나타나는 것으로 분석되었다. 따라서 플라이애쉬를 다량 사용할 경우 이에 따르는 조기강도 하락 방지에 CSA 및 제지애시가 효과적으로 사용될 수 있을 것으로 검토되었다.

Keywords