• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.180-184
• /
• 1998

It was examined that the rheological behaviors of fly ash 70wt%-clay 30wt% slip in which nonplastic fly ash was a major component. We have systematically investigated the effects of deflocculant(Tetrasodium pyrophosphate ; Na4P2O7 nH2O Sodium silicate; Na2SiO3) and coagulant(CaSO4) on the rheological behavior of ash-clay slip. Ash-clay slip have been characterized on the basis of the time dependent rheology which was done out by the gel-curve test. Dispersion mechanism of ash-clay slip is the steric stabilization by the Na2SiO3 coating of cenospheres surface. Coagulated slip seems to have the new network structure and shows the gellation behaviors which makes it possible to direct coagulated casting(DCC).

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.458-465
• /
• 2000

Although Fly ash possess viable engineering properties, an overwhelming majority of the fly ash from coal combustion is still placed in storage or disposal sites. Similarly, sludges generated from various water treatment operations are predominantly subject to the fate of land disposal. To prepare sludges for land disposal typically requires time consuming dewatering schemes, which can become extremely difficult to execute dependent upon the composition of the sludge and its affinity for water. This test was undertaken to reuse of fly ash and sludge with mix. In this paper includes of geotechnical properties of fly ash and fly ash-sludge mixture and results of compaction test, unconfined test, falling head test and CBR test and it was analyzed the effect on mixing fly ash with sludge.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.3
• /
• pp.107-113
• /
• 2000

This study is performed to examine the physical and mechanical properties of concrete with fly ash. Test results show that the unit weights of concrete with fly ash are decreased 1-3% and the highest strength is achieved by 10% filled fly ash concrete with it is increased 7% than that of the normal cement concrete. the ultrasonic pulse velocity is in the range of 3.705~4.204m/s and the dynamic and static modulus of elasticity is in the range of 271$\times$103 ~289$\times$103kgf/cm2 and 208$\times$103 ~262$\times$103kgf/cm2 respectively. The acid-resistance is increased with increase of the content of fly ash. It is 1.2 times of the normal cement concrete by 10% filled fly ash concrete and 1.7 times by 30% filled fly ash concrete respectively.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.489-495
• /
• 2007

Effects of ultrafinely ground ash on the rheological properties of cement paste were investigated. Also compressive strength development and setting time of ultrafine ash blended cement mortar were investigated in the study. A sample with silica fume was included for comparison. According to the results of ultra fine ash blended cement paste in the lower W/B ratio, the fluidity were high, and the setting time was a little retarded. And the compressive strength of ultrafine ash blended mortar was increased in the long term. In the case of hardened cement paste at 28 days, $Ca(OH)_2$ contents was decreased in order of control, ultrafine ash, silica fume blended cement due to difference of the pozzolanic reaction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.209-210
• /
• 2019

Current international concerns are the energy crisis due to climate change and depletion of fossil fuels due to global warming. Korea has a very high dependency on energy imports 93%. In Korea, 63% of the country is forested, and a power plant using wood biomass is being built in Korea. Biomass fly ash, a by-product of biomass energy generation, is now being discarded. There is little research to utilize discarded biomass fly ash. Therefore, this study aims to solve the environmental problems, develop new mixed materials, improve the quality and utilize the biomass fly ash, which is a by-product of the industrial waste. As a result of the experiment, the flowability decreased as the replacement ratio of biomass fly ash increased. As the replacement ratio of biomass fly ash decreased, the amount of air content.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.166-167
• /
• 2013

Bottom ash, which is discharged through a wet process in a thermal power plant, contains much unburned coal due to quenching and much salt due to seawater. However, dry bottom ash discharged through a dry process contains low unburned coal and salt, and has light -weight due to many pores. Therefore, it is expected that it can be used as lightweight aggregate. This study deals with the basic properties of concrete used dry bottom ash as coarse aggregate. As a results, the concrete having high content of dry bottom ash aggregate showed high slump by using water reducing agent and its air content was within 5±1.5% as designed value, similarly to normal weight concrete. It also showed a lower compressive strength than 100% of crushed stone.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.125-126
• /
• 2021

Fly ash, has been widely used as one of the main supplementary cementitious materials (SCMs) in the world, to replace part of cement to significantly save energy and reduce greenhouse emission. Via mechanical activation, fly ash can replace more cement without impairing early age compressive strength. This study focuses on the strength-based evaluation of carbon dioxide emission for blended cement composite containing mechanically activated fly ash. Results indicate that under similar compressive strength, a prominent drop has been witnessed in embodied energy of binary cement and CO2 emission of the composite containing mechanically activated fly ash compared with those containing ordinary fly ash.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.834-841
• /
• 2004

The purpose of this study is to investigate the properties of traditional Korean ash glazes by using locally available sources; 10 kinds of grain stems,2 kinds of husks (pod, chaff), and 4 kinds of vegetables (spinach, radish leaf and stem, pumpkin leaf and stem, pepper stem), and to develop their practical uses as ash glazes. The test results of these ash glazes indicate that these ashes can be classified into four categories. The first group, which includes perilla stem ash, sesame stem ash, black bean stem ash and red-bean stem ash, shows strong milky white due to relatively lower content of $SiO_2$, and relatively higher content of CaO and P$_2$O$\_$5/ content (10% higher than others), and their glazes were found to be suitable for opaque glaze as they show relatively stable bright greenish color. The second group includes pepper stem ash, spinach ash, pod ash, radish leaf and stem ash, and bean stem ash, and this group was found to contain even quantity of every component. And their glaze show somewhat greenish color because of especially high content of MgO and more than 2% of Fe$_2$ $O_3$. They were found to be suitable for basic glaze of IRABO glaze. The third group, which includes com stalk ash, white bean ash, pumpkin leaf and stem ash, has more $SiO_2$ and Al$_2$ $O_3$ than other ashes, and it also contains 3～5% of Fe$_2$ $O_3$. As a result of those components, this third group shows the greatest change of color and chroma, and was found to be suitable glazes as basic glaze of Temmoku and black glazes. The fourth group (reed ash, rice straw ash, indian millet stalk ash and chaff ash) has as much as 45～82% of $SiO_2$ and relatively lower content of Fe$_2$ $O_3$ and P$_2$ $O_3$. This group shows blue or greenish white color, and was found to be suitable as the basic glaze of white glaze.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.61-66
• /
• 2014

The various recycling methods of mixed coal ash have been developed considerably and it's recycling quantity has been increased. However, the more relatively finer grain content of coal ash in ash pond is increased the more it's quantity is increased in recycling as products for drainage in soft ground etc. Accordingly, the geotechnical properties of mixed coal ash in ash pond would be inferior and it's recycling rate should reach the limitations in increase. In this study, to recycle mixed coal ash contained fine grain in considerably amount as products for strength, etc. By adding binder to it and manifesting, it's compressive strength is stronger than the criteria, these are suggested; 1) the variety of compressive strength test performed on mixed coal ash of various grain distributions as main material, 2) the kind of binder, it's mixing quantity and the optimum content rate range of fine grain coal ash that the compressive strength stronger than a certain compressive strength is manifested. Cement is more excellent than quicklime as binder in manifesting stronger compressive strength and the sieve type to sort it is #40 sieve in order to recycle all mixed coal ash in ash pond efficiently as products for drainage as well as products for strength, etc. And, it could increase insufficient compressive strength remarkably that content of pure sand is more in the rate as pure sand and the part of mixed coal ash in ash pond to pass through #40 sieve is mixed in the ratio of 2 to 8.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.126-134
• /
• 2002

Fabrication of mortar containing fly ash for high strength structural material was investigated by using a Mechanochemically Processed Cement (MPC) and/or Fly Ash (MPFA), which was compared to the specimen (at the same fabrication condition of fly ash adding contents (10, 20 and 30 wt%) and curing time (7 and 28 days)) fabricated by using Ball-mill Processed Cement (BPC) and As Received Fly Ash (ARFA) in terms with compressive strength and microstructures. Mortar specimen fabricated by using MPC and ARFA showed 5-11% higher compressive strength than that in the case of using BPC and ARFA, and mortar specimen by using BPC and MPFA represented 10-20% higher compressive strength than that for the case of using BPC and ARFA. Furthermore, mortar specimen fabricated by simultaneously using MPC and MPFA exhibited about 24% higher value of compressive strength than that for the case of using BPC and ARFA, which was considered to be synergic efficiency in increasing compressive strength. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity between cement and fly ash induced during mechanochemical Processing(MP).