• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.158-162
• /
• 2001

In this report, a new process for patterning of YBaCuO thin films, ICP(inductively coupled plasma) method, is described by comparing with existing wet etching method. Two 100㎛ wide and 2mm long YBaCuO striplines on LaAlO$_3$ substrates have been fabricated using two patterning techniques. And the properties were compared with the critical temperature and the SEM photography. Then, the critical temperatures of two samples were about 88 K, but the cross section of sample using ICP method was shaper than that using the wet etching method. ICP method can be used as a good etching technique process for patterning of YBaCuO superconductor.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.1
• /
• pp.33-42
• /
• 1996

The high coherence of laser beam has made it possible to observe interference effects even in the light scattered from rough surfaces. That's why, when object with a scattering surface is illuminated with laser light, we do see a speckled appearance due to random interference. This sort of unique property of laser speckle has bruht into existence the new noncontaciting techniques such as speckle metrology method of measuring deformation, displacement, and vibration etc of objects with high optical sensitivity. The measurable range of speckle metrology especially used to measure in -plane information, however, is limited by some factors, the so-called strain, rotation tilt of surface and out of displacement perpendicular to the plane of analysis This restrictions severly limits the measurable range of speckle metrology by causing the decorrelation of speckle patterns. It is the purpose of this paper to give a survey on the measurable limitation of speckle photography method that is one of speckle metrology. Namely we will discuss the mutual relationships and problems of each limitations adding the restriction on the largest and smallest displacement measurable with speckle methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.989-992
• /
• 1997

The objective of this study is to develop stencil cutting process and determine optimal conditions which make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pressure, cutting speed and pulse width on the cut edge quality were investigated. In order to analyze the cut surface characteristics(roughness, kerf width, dross) optical microscopy, SEM photography and roughness test were used. A a results, the optimal conditions of process parameters were determined, and the practical feasibility of the proposed system is also examined by using a commercial gerber file for PCB stencil manufacturing.

• Publications of The Korean Astronomical Society
• /
• v.2 no.1
• /
• pp.47-60
• /
• 1985

Four observational astronomical item, have been pilottested with a 150mm refracting telescope in order to layout the detailed procedures for the suggested (inquiry) activities listed in the high school earth science curriculum and to contrive some adequate instructions for students stressed on how to make proper treatments with the collected materials. The tested items were of sunspots' motion, the size of lunar craters, the Galilian satellites' revolution, and the galactic distribution of stars. Following series of activities are suggested with respect to the way of collecting observational data and of giving proper instruction to students in class: 1) Photography and other material, he made by teacher and/or extracurricular group of students; 2) Replicas (xeroxed, photographs, Or slides) he made from the collected materials, '0 that they are available to all the students in class; 3) Quantative analyses, be taken as student' activity.

• Journal of the Korean Home Economics Association
• /
• v.44 no.1 s.215
• /
• pp.159-168
• /
• 2006

The purpose of this study was to analyse the types of expression of fashion magazine advertising using the Foote, Cone and Belding(FCB) GRID model. Consequently, this study examined the presentation of fashion magazine advertising. The fashion magazine advertising(771 cases in women's magazines, 120 cases in men's magazines) was classified according to the FCB GRID model. The fashion magazine advertising was categorized into high involvement-feeling goods(jewelry, accessories, bags, shoes, perfumes, men and women dresses, jeans, bathing suits etc.), low involvement-feeling goods(casual wears, imitation accessories etc.), high involvement-thinking goods(cosmetics, underwears, sports shoes etc.) and low involvement-thinking goods(hair goods, sports wears, undergarments etc.). A great of the fashion advertising consisted of photography and the emotional approach. Thinking goods placed emphasis on the functional value, whereas high involvement-feeling goods placed emphasis on the emotional value and low involvement-feeling goods on the fashionable value.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.4
• /
• pp.241-248
• /
• 2008

The purpose of the research is to investigate of diesel spray combustion for simultaneously reduction way of NOx and PM. The diesel injection were done into intermediates that are generated by very lean DME HCCI combustion using a RCM. The concentration of intermediate could not be directly measured, so we estimated it by CHEMKIN calculation. Two dimensional spontaneous luminescence images which are created by chemical species reaction at low temperature reaction (LTR) and high temperature reaction (HTR) are captured by using a framing streak camera. Also, combustion events were observed by high-speed direct photography. The ignition and combustion events were analyzed by pressure profiles and the KL values and flame temperatures were analyzed by the two-color method.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.23-30
• /
• 1975

To elucidate the dependability of seed variability determination by tetrazolium, 15 tree species were checked. For the comparison of potential germinability for these tree seeds, x-ray photography and routine germination test in a incubator were implemented. Though there were considerable differences of seed variability in percentage between germination test and tetrazolium test, the judgement by tetrazolium test and x-ray test gave similar results. These findings indicated that tetrazolium test is a reliable method if treated and inferred properly. Solution of 0.25 percent tetrazolium could give a complete colour reaction as well as 0.50 percent solution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.2
• /
• pp.329-339
• /
• 1995

This study intended to provide valuable basic data for an efficient using newspaper advertising to manufactures by investising and analyzing the character of newspaper as fashion advertising and media environment, consumer's attitude of advertising subscription, a degree of recognition and concern on a newspaper advertising and a degree of like on expressive form of a newspaper advertising. A question that is drawn up by researcher base on existing records and preceding study was used as major method for understanding consumer's consciousness. The sample group is composed of female students, working women, housewives who lives in Seoul. The results of this study were as follows. 1. Manufactures should be developing Headline in subject matter to get out of plain sale advertising and event advertising. 2. Manufactures should difference to understanding Illustration that consumer prefer. Also using of photography is efficient and it is importent to use of color advertising that appeal to consumer. 3. The informative advertising is a high degree of efficiency by reason that the newspaper offers great news source and information.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.4
• /
• pp.37-42
• /
• 2009

This study extracted Near Infrared (NIR) band using Image Processing Technology (IPT), and calculated Normalized Difference Vegetation Index (NDVI). Aerial photography from Daum portal in combination with high resolution satellite image was employed to improve vegetation sensitivity by extracting NIR band and calculating NDVI with comparison to QuickBird result. The extracted NIR band and NDVI through IPT presented similar distribution pattern. In addition, a regression analysis by land cover character showed high correlation paddy and forest Therefore, this approach could be acceptable to acquire vegetation environment information.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.31-38
• /
• 1992

The objective of this study is to determine the ignition feasibility of a single shot, air-assisted gasoline fuel injector operated in a constant volume combustion chamber under atmospheric condition. A number of parameters has been selected for this experiments, such as dwelling time, spark gap position(r,z), spark electrode geometry, supplied air and fuel masses and spray cone deflector angle. On-site visual inspection of the instantaneous flame glow was chosen as one way to judge the successful ignition. In addition, chamber pressure and occasional photography were mobilized as for data recording. It was clearly observed that there was an entrainment air-fuel mixture toward spray axis from the spray formation and its development later on. The optimum ignition conditions were found for those parameters given above.