• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.352-362
• /
• 1991

Recent popular trends in pressurized water reactor(PWR) fuel management are to extend the cycle length and to employ the low-leakage core designs for the optimal utilization of the uranium resources. In control strategy incorporated with the fuel management, turnable absorbers are required to control the power peaking and to ensure a negative moderator temperature coefficient during reactor operation. In this study, the nuclear characteristics and the optimal allocation of gadolinium-poisoned rods within the fuel assembly are considered using KWU SAV 79 A Code Package. First, analyses are carried out to compare the nuclear characteristics of the fuel assemblies contain-ing WABA(Wet Annular Burnable Absorber) and Gadolinium burnable absorbers respectively. The analyses show that the gadolinium-bearing fuel assembly has peculiar depletion characteristics ensuing from the very large thermal neutron absorption cross section. Peculiar characteristics of gadolinium provide basis for the optimal allocation of Gd rods in fuel assembly. Second, the methodology of an optimal allocation of gadolinium-poisoned rods within the fuel assembly is developed and applied to some nuclear designs.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.251-255
• /
• 2015

Thermal deformation, such as bending and twisting, occurs among the polymer parts of air-conditioner indoor units because of repetitive temperature change during heating operation. In this study, a numerical method employing finite-element analysis to efficiently simulate the thermal deformation of an assembly is proposed. Firstly, the displacement of an actual assembly produced by thermal deformation was measured using a 3D optical measurement system. The measurement results indicated a general downward sag of the assembly, and the maximum displacement value was approximately 1 mm. The temperature distribution was measured using a thermographic camera, and the results were used as initial-temperature boundary conditions to perform temperature-displacement analysis. The simulation results agreed well with the measured data. To reduce the thermal deformation, the stiffness increased 100%. As the results, the maximum displacement decreased by approximately 5.4% and the twisting deformation of the holder improved significantly.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.1
• /
• pp.60-83
• /
• 2014

This paper aims to propose a research framework of analyzing voting activities of a national assembly on the basis of member-level voting similarity and provides a case study in the $18^{th}$ national assembly in South Korea. First, we propose a bill contentiousness measure that gives a higher score to bills for which ayes and noes are more diversified in both conservative and progressive parties. Based on the bill contentiousness measure, the top 5%, 10%, and 20% bills were identified and used for further analyses. Moreover, we propose a member-level voting similarity measure that compensates for the lower frequency of noes, and evaluate the pair-wise voting similarities for all lawmakers. Then, voting similarity differences to the affiliated/non-affiliated parties were analyzed for the members in the two major parties according to some internal/external key factors. Finally, similar voting groups were identified and their affiliations were investigated based on the multi-dimensional scaling (MDS) and network analysis techniques. A case study on the $18^{th}$ national assembly of South Korea showed that the cohesion of the members in the 'Hanara' party becomes higher than that of the 'Minju' party as the bill contentiousness increases, whereas the number of elected, local constituency versus proportional representation, and the competition intensity in a local constituency were found to be partially influential to the voting activities of lawmakers. In addition, MDS and network analysis showed that there is a distinctive difference between two parties when all bills are analyzed, whereas the diversity of parties increases in the same group as the bill contentiousness increases.

• IE interfaces
• /
• v.20 no.1
• /
• pp.33-40
• /
• 2007

In this paper, we consider a scheduling problem of shipyard sub-assembly process. We introduce a skid conveyor system in a shipbuilding company. We develop a mathematical model and a genetic algorithm for shipyard sub-assembly process. The objective of the scheduling is to minimize the makespan which is the final completion time of all jobs. Numerical experiments show that the genetic algorithm performs efficiently.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2120-2130
• /
• 2024

This study significantly reduced the seismic analysis time of PCSG assembly by introducing a reduced model using homogenization and sub-structuring methods. The homogenization method was applied to the primary and secondary micro-channel sheets, and the sub-structuring method was applied to the PCSG module sets. Modal analysis and frequency response analysis were then performed to validate the accuracy of the reduced model. The analysis results were compared with the full model and it was confirmed that the reduced model provided almost the same analysis results as the full model. To verify the computational efficiency of the reduced model, the computational time was then compared with the full model, and it was confirmed that the modal analysis time was reduced by 3.42 times and the frequency response analysis time was reduced by 4.59 times.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.1-8
• /
• 2020

In this paper, we propose a gene family based RNA-seq read distribution method in means to accelerate the overal transcriptome assembly computation time. To measure the performance of our transcriptome sequence data distribution method, we evaluated the performance by testing four types of data sets of the Arabidopsis thaliana genome (Whole Unclassified Reads, Family-Classified Reads, Model-Classified Reads, and Randomly Classified Reads). As a result of de novo transcript assembly in distributed nodes using model classification data, the generated gene contigs matched 95% compared to the contig generated by WUR, and the execution time was reduced by 4.2 times compared to a single node environment using the same resources.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.211-217
• /
• 2006

Diphenyl amine (DPA) was polymerized inside the channels of the mesoporous silica (MCM-41). MCM-41 (C) and MCM-41 (D) were prepared with cetyltrimethyl ammonium bromide (CTAB) and dodecyltrimethyl ammonium bromide (DTAB), respectively and used as hosts. Initially, the self assembly of DPA inside the pores of MCM-41 was made in ${\beta}$-naphthalene sulfonic acid (NSA) medium and subsequently poly (diphenylamine), PDPA was formed by oxidative polymerization. $N_2$ adsorption-desorption measurements of PDPA loaded MCM-41 (C) and MCM-41 (D) show variations in pore volume and surface area between them. A tubular form of poly (diphenylamine), PDPA was envisaged to form in the pores of MCM-41 and supported by high resolution transmission microscopy. The presence of PDPA inside the channel of MCM-41 was further confirmed by FTIR spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2477-2486
• /
• 2000

A planetary gear assembly is a key component to combine and/or split a power from the source. With a planetary gear assembly, a continuously variable unit extends its capacity by means of power bra nching mechanism. Power branching with one planetary gear assembly and one continuously variable unit is categorized into 12 basic types. Each type represents peculiar power transmitting characteristics. Additionally, a multi-mode (range) continuously variable transmission can be designed with accompanying clutches. A multi-mode continuously variable transmission changes the path through which the source power is transmitted. Each path has its own features, such as high efficiency. In this paper, some design principles are examined such as, criteria to guarantee the minimum power efficiency, and constraints to guarantee the smooth mode shift after discussing well-known features of multi-mode M mathematically.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2193-2198
• /
• 2011

We prepared polycatenar 1H-imidazole amphiphiles having a structure in which a 1H-imidazole head was connected through a benzene ring to a pheny group having two or three oligo(ethylene glycol) chains and studied their supramolecular assembly by fluorescence spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM). When the aqueous solutions of the amphiphiles ($5{\times}10^{-5}M{\sim}10^{-3}M$) were deposited onto a carbon-coated copper grid and dried, twisted structures with diameters of ~200-300 nm were imaged by TEM and AFM. We presume that the structures comprised a chain of the amphiphile dimers formed via successive hydrogen bonding between the 1H of the imidazole group and 3N of the neighboring one. In a solution of pH 4, entangled fibers with diameters of several nanometers were observed by TEM. In a pH 10 solution, film-like aggregates formed exclusively. The 1H-imidazole amphiphiles hydrolyzed tetraethoxysilane to induce gelation to form fibrous and spherical silica structures at neutral pH in aqueous solutions. No silica was formed when imidazole was used instead of the amphiphiles, suggesting that the selfassembled aggregates of the amphiphiles were responsible for the gelation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3542-3546
• /
• 2014

Relationship between molecular freedom of amyloidogenic protein and its self-assembly into amyloid fibrils has been evaluated with ${\alpha}$-synuclein, an intrinsically unfolded protein related to Parkinson's disease, by restricting its structural plasticity through an end-to-end disulfide bond formation between two newly introduced cysteine residues on the N- and C-termini. Although the resulting circular form of ${\alpha}$-synuclein exhibited an impaired fibrillation propensity, the restriction did not completely block the protein's interactive core since co-incubation with wild-type ${\alpha}$-synuclein dramatically facilitated the fibrillation by producing distinctive forms of amyloid fibrils. The suppressed fibrillation propensity was instantly restored as the structural restriction was unleashed with ${\beta}$-mercaptoethanol. Conformational flexibility of the accreting amyloidogenic protein to pre-existing seeds has been demonstrated to be critical for fibrillar extension process by exerting structural adjustment to a complementary structure for the assembly.