• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.233-236
• /
• 2021

Recently, the Justice Party is pushing for legislation of a bill called the Algorithm Transparency Act. The bill is a revision to the Information and Communication Network Act proposed by Rep. Ryu Ho-jung on June 25, 2021, and aims to form a separate committee under the Korea Communications Commission to ask organizations operated for profit to search algorithms and explain the principles of arrangement. Currently, Korea treats algorithms as corporate secrets and does not disclose them, while the European Union (EU) implements the Personal Information Protection Regulations (GDPR) in relation to algorithm regulations. Therefore, this study summarizes the main contents of the Algorithm Transparency Act currently proposed to the National Assembly and reviews the current status of algorithm-related laws and systems in the European Union (EU) and the improvement of algorithm transparency.

• Health Policy and Management
• /
• v.33 no.3
• /
• pp.273-294
• /
• 2023

Background: Most developed countries are working to improve their universal health coverage systems. This study investigates regional disparities in unmet healthcare needs and their causes in South Korea. Additionally, it compares the unmet healthcare needs rate in South Korea with that of 33 European countries. Methods: The analysis incorporates information from 13,359 adults aged 19 or older, using data from the Korea Health Panel. The dependent variables encompass the experience of unmet healthcare needs and the three causes of occurrence: "burden of medical expenses," "time constraints," and "lack of care." The primary variable of interest is the region of residence, while control variables encompass 14 socio-demographic, health, and functional characteristics. Multivariable binary logistic regression analysis, accounting for the sampling design, is conducted. Results: The rate of unmet healthcare needs in Korea is 11.7% (95% confidence interval [CI], 11.0%-13.3%), which is approximately 30 times higher than that of Austria (0.4%). The causes of unmet healthcare needs, ranked in descending order, are "lack of care," "time constraints," and "burden of medical expenses." Predictive probabilities for experiencing unmet healthcare needs and each cause differ significantly between regions. For instance, the probability of experiencing unmet healthcare needs due to "lack of care" is approximately 10 times higher in Gangwon-do (13.5%; 95% CI, 13.0%-14.1%) than in Busan (1.3%; 95% CI, 1.3%-1.4%). The probability due to "burden of medical expenses" is approximately 14 times higher in Seoul (4.1%; 95% CI, 3.6%-4.6%) compared to Jeollanam-do (0.3%; 95% CI, 0.2%-0.4%). Conclusion: Amid rapid sociodemographic transitions, South Korea must make significant efforts to alleviate unmet healthcare needs and the associated regional disparities. To effectively achieve this, it is recommended that South Korea involves the National Assembly in healthcare policy-making, while maintaining a centralized financing model and delegating healthcare planning and implementation to regional authorities for their local residents-similar to the approaches of the United Kingdom and France.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.887-908
• /
• 2022

In order to confirm the effects of economic growth and environmental improvement, this study analyzed the existence of environmental Kuznets curve (EKC) for SO₂ emission, greenhouse gas emission, and waste generation in OECD countries. As a result of panel analysis, the shape of the EKC were different depending on environmental pollutants. SO₂ generated peaks relatively early in economic growth, and the peak of greenhouse gas emissions was showed in higher income level. But both emissions showed the a complete inverted U-shaped curve decreasing after the peak. On the other hand, for waste, there was no environmental Kuznets curve that could confirm the peak. Therefore, this study confirmed that it is difficult to expect a voluntary reduction in all environmental pollutants, and additional global joint efforts are needed to pass the peak. In particular, since waste has a greater impact on population density and industrial structure than income level, additional policy efforts are needed to reduce generation and create a resource circulation system.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.60-66
• /
• 2023

As supply chain management becomes a key factor in the sustainable growth of the industry, securing minerals at the national or corporate level is becoming important. Depending on the industrial structure, the economic status of each minerals is different and the supply risk is different In this study, to examine the economic status of minerals, an index that can quantify the Industrial Economic Importance by minerals was developed and calculated by reflecting the demand structure and cost weight of each industry. As a result, Li, Al, Cu, Si, Co, Ni, etc. were evaluated as having high industrial importance in Korea. In addition, by industry, Al, Cu, Zn, and Pb for primary metal manufacturing, general machinery, assembly metals,Sn, Ba, Ti, Si and Ga for precision equipment, Si and Ga for semiconductors, and Li, Ni, Co, Si, etc. for electronic components had high industrial importance. Such as Europe and the United States, in order to select Critical-minerals, Korea will need to analyze the economic impact on the domestic industry as well as the risks of supply chain by minerals.

• Korean Journal of Legislative Studies
• /
• v.15 no.2
• /
• pp.187-217
• /
• 2009

The purpose of this study is to analyze whether there is gender difference in Members' voting on women's issue bills, and to find out determinants of Members voting decisions on the same bills. The findings are as follows. First, there is no gender difference in women's issue voting, so women Members as a group were not significantly different from men Members in voting behavior. That's not because women Members were split in voting but because both men and women Members are very supportive of the bills. Secondly, Members' party and ideology play a significant role in Member' voting on women's issue. Compared to the majority party(Uri party)'s overwhelming support, minority parties are much less supportive on the issues. Member's ideology also proved to be important indicator of voting decision. The more ideologically liberal Members are, the more supportive of the bills.

• Journal of Radiation Protection and Research
• /
• v.49 no.1
• /
• pp.29-39
• /
• 2024

Background: The gamma emission tomography (GET) device has been reported a reliable technique to inspect partial defects within spent nuclear fuel (SNF) of pin-by-pin level. However, the existing GET devices have low accuracy owing to the high attenuation and scatter probability for SNF inspection condition. The purpose of this study is to design and optimize a Yonsei single-photon emission computed tomography version 2 (YSECT.v.2) for fast inspection of SNF in water storage by acquisition of high-quality tomographic images. Materials and Methods: Using Geant4 (Geant4 Collaboration) and DETECT-2000 (Glenn F. Knoll et al.) Monte Carlo simulation, the geometrical structure of the proposed device was determined and its performance was evaluated for the ¹³⁷Cs source in water. In a Geant4-based assessment, proposed device was compared with the International Atomic Energy Agency (IAEA)-authenticated device for the quality of tomographic images obtained for 12 fuel sources in a 14 × 14 Westinghouse-type fuel assembly. Results and Discussion: According to the results, the length, slit width, and septal width of the collimator were determined to be 65, 2.1, and 1.5 mm, respectively, and the material and length of the trapezoidal-shaped scintillator were determined to be gadolinium aluminum gallium garnet and 45 mm, respectively. Based on the results of performance comparison between the YSECT.v.2 and IAEA's device, the proposed device showed 200 times higher performance in gamma-detection sensitivity and similar source discrimination probability. Conclusion: In this study, we optimally designed the GET device for improving the SNF inspection accuracy and evaluated its performance. Our results show that the YSECT.v.2 device could be employed for SNF inspection.

• Journal of Animal Science and Technology
• /
• v.66 no.1
• /
• pp.1-30
• /
• 2024

Interest and investment in cultivated meat are increasing because of the realization that it can effectively supply sufficient food resources and reduce the use of livestock. Nevertheless, accurate information on the specific technologies used for cultivated meat production and the characteristics of cultivated meat is lacking. Authorization for the use of cultivated meat is already underway in the United States, Singapore, and Israel, and other major countries are also expected to approve cultivated meat as food once the details of the intricate process of producing cultivated meat, which encompasses stages such as cell proliferation, differentiation, maturation, and assembly, is thoroughly established. The development and standardization of mass production processes and safety evaluations must precede the industrialization and use of cultivated meat as food. However, the technology for the industrialization of cultivated meat is still in its nascent stage, and the mass production process has not yet been established. The mass production process of cultivated meat may not be easy to disclose because it is related to the interests of several companies or research teams. However, the overall research flow shows that equipment development for mass production and cell acquisition, proliferation, and differentiation, as well as for three-dimensional production supports and bioreactors have not yet been completed. Therefore, additional research on the mass production process and safety of cultivated meat is essential. The consumer's trust in the cultivated meat products and production technologies recently disclosed by some companies should also be analyzed and considered for guiding future developments in this industry. Furthermore, close monitoring by academia and the government will be necessary to identify fraud in the cultivated meat industry.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.35-39
• /
• 2004

Ship structures are basically an assembly of plate elements and the load-carrying capacity or the ultimate strength is one of the most important criteria for safety assessment and economic design. Also, Structural elements making up ship plated structures do not work separately, resulting in high degree of redundancy and complexity, in contrast to those of steel framed structures. To enable the behavior of such structures to be analyzed simplifications or idealizations must essentially be made considering the accuracy needed and the degree of complexity of the analysis to be used On this study, to investigate effect of modeling range, the finite element method are used and their results are compared varying the analysis ranges. The model has been selected from bottom panels of merchant ship structures. For FHA, three types of structural modeling are adopted in terms of the extent of the analysis. The purpose of the present study is to numerically calculate the characteristics of ultimate strength behavior according to the analysis ranges of stiffened panels subject to uniaxial compressive loads.

• Journal of the Korean Geographical Society
• /
• v.49 no.3
• /
• pp.371-389
• /
• 2014

This study aims to analyze the redistricting problems in non-autonomous Gu. Although non-autonomous Gu is a just local administrative district, it has been regarded as an important and basic spatial unit in electoral redistricting. By the reform of Public Official Election Act in 2012, however, non-autonomous Gu is distinguished from local governments like Si, Gun and autonomous Gu, in boundary delimitation for the 19th National Assembly election, and some are divided into a part of another constituency. About these background, this study points out the following problems. First, in national scale, the reform of Act made the malapportionment in constituencies of non-autonomous Gus, comparing with those of local governments. Second, there was the discriminative application of Act in each non-autonomous Gu and it will make the malapportionment worse in next election, considering the reorganization of local administrative system. Finally, this study propose that it is necessary to select one from a variety of redistricting principles, especially between the prevention of gerrymandering, the representativeness of local government and the apportionment, prior to another amendment of redistricting system and the debate about political reform.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.76-84
• /
• 2012

In this paper, two kinds of E-plane microstrip-to-waveguide transitions are optimally designed and fabricated for combining output power from multiple small-power amplifiers in a WR-28 waveguide because conventional K connectors cause unnecessary insertion loss and adaptor loss. The transition design is based on target specifications such as a center frequency of 35 GHz, bandwidth of ${\pm}500MHz$, 0.1 dB insertion loss and 20 dB return loss. Performance variation caused by mechanical tolerance and assembly deviation is fully evaluated by three dimensional electromagnetic simulation. The fabricated back-to-back transitions with 16 mm and 26.57 mm interstage microstrip lines show insertion loss per transition of ~0.1 dB at 35 GHz and average 0.2 dB over full Ka band. Also the back-to-back transition shows return loss greater than 15 dB, which implies that the transition itself has return loss better than 20 dB.