• 한국조경학회지
• /
• 제23권1호
• /
• pp.111-122
• /
• 1995

12 populatiDns of Ch indicum L. and it's variation antogenous in Tforea were selected throughout the country and their morphological characteristics were studied in this paper. The results are as follows. 1) The mean of the plant height is 97.3cm. Ch. indicunl is 76.5cm and Ch. boreale is 116. 6cm in height. The number of nodes is 58 on the average. The color of the stem is generally black-red in the case of Ch. indicum and is green for Ch. boreale. 2) The leaves of Ch. inficum are smaller In size and thicker than chose of Ch. boreale, and it has a stipule. This fact enables us to distinguish one species from the other, however, the Gyukpo-population of Ch. indicum has a large leaf, and Byunsan-population of Ch. boreale has a stipule so that the above fact is not an exact criterion on which to base one classification. 3) The size of the capitulum is 24.9mm for Ch. indicum and 15.6mm in the case of Ch. boreaje so that the difference between species is admitted. It was confirmed hat the size of the capitulum has positive correlation to that of the pedicel and has egative correlation to the number of flowers, so that of inflorescence, Ch. indicumhas corymb, and Ch. boreale has crowed corymb or umbel-type.The number of ligulates is 19 on the average, which no the difference being founnd between species and populations.4) The cluster analysis of morphological characteristics showed that Ch. indicum wasdivided into two groups, which was shown thought to be due to the difference of speciesbetween Ch. indicum and Ch. boreale. However, it could not be shown that their morphological characteristics explain a geographical relationship between populations

• 한국농공학회논문집
• /
• 제66권3호
• /
• pp.1-14
• /
• 2024

Gaining an accurate 3D stream geometry has become feasible with Unmanned Aerial Vehicle (UAV), which is crucial for better understanding stream hydrodynamic processes. The objective of this study was to investigate series of filters to remove stream vegetation and propose the best method for generating Digital Terrain Models (DTMs) using UAV-based point clouds. A stream reach approximately 500 m of the Bokha stream in Icheon city was selected as the study area. Point clouds were obtained in August 1st, 2023, using Phantom 4 multispectral and Zenmuse L1 for Structure from Motion (SfM) and Light Detection And Ranging (LiDAR) respectively. Three vegetation filters, two morphological filters, and six composite filters which combined vegetation and morphological filters were applied in this study. The Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were used to assess each filters comparing with the two cross-sections measured by leveling survey. The vegetation filters performed better in SfM, especially for short vegetation areas, while the morphological filters demonstrated superior performance on LiDAR, particularly for taller vegetation areas. Overall, the composite filters combining advantages of two types of filters performed better than single filter application. The best method was the combination of Progressive TIN (PTIN) and Color Indicies of Vegetation Extraction (CIVE) for SfM, showing the smallest MAE of 0.169 m. The proposed method in this study can be utilized for constructing DTMs of stream and thus contribute to improving the accuracy of stream hydrodynamic simulations.

• 복식
• /
• 제64권8호
• /
• pp.55-66
• /
• 2014

Baeja(背子), which was excavated from the tomb of Sim, Su-ryun(沈秀崙, 1534-1589), a civil official, has a distinctive pattern. Two rectangles are connected by button knots on both shoulders and below the armpits, and surround the front and back of the upper body. Also, the back is shorter than the front, while the center-front is not opened. It also has a round neckline without a collar. Jeojuji(楮注紙), which is a traditional Korean paper made from mulberry bark, is put between the outer shell and lining of this clothing as an interlining. The purpose of this study is to perform a morphological feature analysis of the Baeja to examine its characteristics and name, and clothes with similar features, attire relic, pictorial and ceramic materials as well as precedent studies were used in the analysis. The Baeja, which was excavated from the tomb of Sim, Su-ryun, has the same pattern as Yangdang(裲檔), which was worn in the ancient northern region and China. Its composition and the way it was worn are very simple. Also, the shorter back length can be used as evidence that it was worn as everyday outer clothing, and not in a ceremony. Jeojuji, used as an interlining, made it easy to sew and maintain attire pattern and played a role of maintaining warmth. Therefore, this Baeja is presumed to be an outer clothing simply worn in the everyday life for convenience and warmth. In regards to its morphological feature, it was most likely a Yangdang in Joseon Dynasty.

• 한국환경생태학회:학술대회논문집
• /
• 한국환경생태학회 2008년도 추계 학술대회
• /
• pp.129-132
• /
• 2008

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2006년도 Grop Science and Biotechnology in the 21st Century
• /
• pp.31.1-31.1
• /
• 2006

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1998년도 춘계 학술대회지
• /
• pp.163-164
• /
• 1998

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권6호
• /
• pp.44-49
• /
• 2003

The morphological analysis of wear debris can provide early a failure diagnosis in lubricated moving system. It can be effective to analyze operating conditions of oil-lubricated tribological system with shape characteristics of wear debris in a lubricant. But, in order to predict and recognize an operating condition of lubricated machine, it is needed to analyze and to identify shape characteristics of wear debris. Therefore, If the morphological characteristics of wear debris are recognized by computer image analysis using the neural network algorithm, it is possible to recognize operating condition of hydraulic driving members. In this study, wear debris in the lubricating oil are extracted by membrane filter (0.45$\mu\textrm{m}$), and the quantitative values of shape parameters of wear debris are calculated by the digital image processing. This shape parameters are studied and identified by the artificial neural network algorithm. The result of study could be applied to prediction and to recognition of the operating condition of hydraulic driving members in lubricated machine systems.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.88-96
• /
• 1996

The characteristic analysis of fly ash generated from a fired power plant using bunker-C oil has been investigated. Ash size distribution by an optical microscopy with image processing technique, morphological shape by a scanning electron microscope(SEM) and microscope, chemical composition by the inductively coupled plasma emission spectrometry(ICP), and resistivity measurement as a function of temperature and moisture content by the resistivity meter are performed. A study of physical, chemical and electrical characteristics of bunker-C fly ash plays an important role of improving the performance of an electrostatic precipitator and protecting air pollution. The samples of bunker-C fly ash for analysis were collected from the electrostatic precipitator hopper of Ulsan Power Plant Unit 1 and Pusan Power Plant Unit 1. Mass median diameter(MMD) of bunker-C fly ash was measured 12.7${\mu}{\textrm}{m}$, while MMD of fly ash generated from the mixture of bunker-C oil(40%) and domestic anthracitic coal(60%) was 25.7${\mu}{\textrm}{m}$. The morphological structure of bunker-C fly ash consisted of fine particles of non-spherical shape. The primary chemical components of bunker-C fly ash were composed of SiO2(2.36%), Al2O3(4.91%), Fe2O3(14.33%) and C(11.84%). Resistivity of bunker-C fly ash was found to be increased with increasing temperature at the range of 100~15$0^{\circ}C$ and was measured 103~104 ohm-cm.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.25-32
• /
• 1996

Hough변환을 이용하여 정자의 행태학적 특성을 분석하는 새로운 방법을 개발하였다. 이 방법은 정자의 머리부분이 주위의 배경과 밝기의 차이를 갖는다는 특성과 함께 그 형태가 타원에 근접한다는 특성에 근거하고 있다. 정자의 머리부분은 타원을 나타내는 5개의 파라메터로 표현되고, 최적의 파라메터 값이 반복적인 Hough 변환에 의하여 검출된다. 일차적으로 정자가 있는 영역을 선택한다. Hough변환을 이용한 계산을 가능하게 하기 위하여 Hough변환된 공간의 크기를 최소한으로 줄이고, 검출된 오차가 최소화되는 방향으로 검사영역을 이동 시켜가며 최적의 파라메터들을 도출한다. 형태학적 특성을 나타내는 지표들은 정자의 형태를 나타내는 타원의 다섯개 파라메터들로부터 계산된다.

• Journal of Plant Biotechnology
• /
• 제46권2호
• /
• pp.61-70
• /
• 2019

There is vast genetic diversity of Myanmar Mangoes. This study mainly focused on indigenous thirteen different mango landraces cultivated in central area of Myanmar, Kyauk-se District and their fruit characteristics by 18 descriptors together with genetic relationship among them by 12 SSR markers. Based on the morpho-physical characters, a wide variation among accessions was found. Genetic characterization of thirteen mango genotypes resulted in the detection of 302 scorable polymorphic bands with an average of 4.33 alleles per locus and an average polymorphism information content (PIC) of 0.7. All the genotypes were grouped into two major clusters by UPGMA cluster analysis and a genetic similarity was observed in a range of 61 ~ 85%. This study may somehow contribute insights into the identification of regional mango diversity in Myanmar and would be useful for future mango breeding program.