• Journal of Life Science
• /
• v.18 no.9
• /
• pp.1186-1193
• /
• 2008

The growth performance of pangasiid catfish (Pangasius hypophthalmus), silver carp (Hypophthalmichthys molitrix) and catla (Catla catla) was evaluated in polyculture at varied combinations and stocking ratios in earthen pond for a period of 16 weeks. Combinations of pangasiid catfish, silver carp and catla with the total density of 30,000 fish per hectare were evaluated. A commercial pelleted feed containing 28% crude protein and 6% lipid was fed only to pangasiid catfish at the rate of 8% of body weight during the first six weeks, 6% during the second six weeks and 4% thereafter twice daily. The growth and feed utilization efficiency of pangasiid catfish were found similar in all treatments. The growth of silver carp was markedly decreased upon the increase of its own stocking density. The highest growth of silver carp achieved in polyculture of pangasiid catfish, silver carp and catla at 2:1:1 ratio where density of silver carp was lowest. The growth of catla was found to be affected by the presence of silver carp. The growth rate of catla markedly declined with the increase of silver carp density. The highest growth of catla obtained in polyculture of pangasiid catfish only with catla stocked at 1:1 ratio. The highest yield and economic return achieved in polyculture of pangasiid catfish, silver carp and catla at the ratio of 2:1:1 due to higher growth of silver carp and higher market value of catla. The water quality conditions in all different treatment ponds were within optimum ranges throughout the culture period and the values did not show any significant variation (p>0.05) among the treatments.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.276-282
• /
• 2008

It is estimated that over 80% of deer antlers produced in the world are consumed in Korea. However, mislabeling or fraudulent replacement of costly antlers with cheaper ones is one of the most common problems in the domestic antler market. Therefore, there is a great need for the development of technology to identify species of antlers. This study was carried out to develop an accurate and reliable method for the identification and authentication of species or subspecies of antlers using DNA sequence analysis and comparison of mitochondrial cytochrome band D-loop region genes among antlers of five deer species, Cervus elaphus sibericus, Cervus elaphus canadensis, Cervus nippon, Cervus elaphus bactrianus and Rangifer tarandus. A variable region of cytochrome band D-loop genes was amplified using PCR with specifically designed primers and sequenced directly. The cytochrome band D-loop region genes showed different DNA sequences between the species of antlers and thus it is possible to differentiate between species on the basis of sequence variation. To distinguish between reindeer (Rangifer tarandus) antlers and other deer antlers, PCR amplicons of the cytochrome b gene were digested with the restriction enzymes NlaIV and TaqI, respectively, which generates a species-specific DNA profile of the reindeer. In addition, samples of 32 sliced antlers labeled Cervus elaphus sibericus from commercial markets were collected randomly and the mt DNA D-loop region of these antler samples was sequenced. Among the antler samples investigated, only 62.5% were from Cervus elaphus sibericus, and others were from Cervus elaphus bactrianus (25.0%), elk (Cervus elaphus canadensis) and reindeer (Rangifer tarandus). Our results suggest that DNA sequencing of mt DNA and PCR-RFLP methods using NlaIV and TaqI enzymes are useful for the identification and discrimination of deer antler species by routine analysis.

• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2008

A total of 15 different residues of polycyclic aromatic hydrocarbons (PAHs) in each 20 samples of Pacific oysters, dried laver and rockfish obtained from seafood markets were analyzed. The prevalence of samples in which more than one PAH residues were found was 75% in oyster, 35% in rock fish hepatopancreas, 0% in rockfish muscle and laver, respectively. To estimate factors contributing to this residue level difference among organisms, tissue concentrations were analyzed after exposing three organisms to phenanthrene, a representative PAH, with concentration of 0.01 or $0.1{\mu}g/mL$ for 2 weeks. Phenanthrene levels after exposure were higher in the oyster digestive gland, laver and rockfish hepatopancreas, but were lower in the oyster whole meat or rockfish muscle. This finding disproved that any close relationship between the residue difference of market samples and concentrating properties of PAHs. The second possible factor analyzed was total lipid contents in the three organisms. Although higher lipid level in hepatopancreas of rockfish may contribute accumulation of PAH residues in the rockfish, lipid factor did not affect to PAH levels in other organism samples. Activity of 7-ethyoxyresorufin-O-deethylase (EROD), a kind of cytochrome $P_{450}$ enzyme, was measured to evaluate the eliminated amount of PAHs through metabolism. The higher EROD activity in rockfish, compared to that in oyster, was likely to contribute to the lower PAH residues in the rockfish. More factors, such as different exposure history, organisms' ability to escape, ingestion through prey organisms, and post-harvest loss, should be studied in the future.

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

• Korean Journal of Agricultural Science
• /
• v.31 no.1
• /
• pp.53-75
• /
• 2004

This study is aimed at identifying the national economic value of the irrigation facilities by reviewing the existing papers on economic values of the irrigation facilities and presenting current status of dual O & M problems of the irrigation facilities. This study suggested the unified O & M system rather than continuing the existing dual O & M system of irrigation facilities based on the surveyed results of the activities of irrigation fraternities in Chungnam Province. The findings and proposals for the successful unified and mono O & M system of the irrigation facilities are as follows: (1) Total number of irrigation facilities in the nation accounts for 67,582, while the total length of irrigation and drainage canals amounted to about 174,259km. On account of the total length of structural canals was estimated at 31%, much losses of water and much O & M costs have been inevitable for the full irrigation rice culture. In spite of the past heavy investment for irrigation facilities, the ratio of rain-fed and partially irrigated paddy fields accounts for 23% in 2003. Both Korea Agricultural and Rural Infrastructure Corporation (KARICO) and the city and Gun Governments have managed the irrigation facilities separately by irrigation fraternities. The KARICO have commanded 59% of irrigation paddy area with 18% of the total irrigation facilities, while the city and Gun governments covered 41% of irrigation paddy area with 82% of the existing number of irrigation facilities representing small and medium scale. (2) The 1999 demand prices of irrigation water per ton expressed in 2000 constant market price was estimated at 388 won, the supply price was amounted to 184 won per ton. Considering the supply and demand curve of the irrigation water, the existing irrigation facilities could not satisfy the demand of irrigation water. (3) In 1999, total present added value of the irrigation facilities during the economic life accounted for 48 trillion won, while total supply cost was 44.7 trillion won. The marginal benefit and cost ratio of irrigation water was 1.08. (4) The total O & M cost per year amounting to 681.1 billion won have been required to maintain and repair the existing irrigation facilities in Korea. For the successful unified O & M of irrigation facilities covering whole irrigated paddy field in Korea, 950 billion won of O & M costs are required to keep up the marginal benefit of irrigation water as 2,800 billion won per year. The total O & M cost as 950 billion won should be allocated 40%, 380 billion won for O & M costs of irrigation facilities and 60%, 570 billion won for improvement of irrigation facilities. (5) The study investigated and reviewed the present O & M status of the irrigation facilities by small and medium irrigation fraternities. Most of the farmers belong to the irrigation fraternities preferred not only unified O & M but also KARICO take-over of the whole O & M activities of the irrigation facilities. The prevailing O & M cost per 10a expended by the Corporation was amounted to 104,890 won, while that of city and Gun governments was only amounted to 4,600 won per 10a. regarding the small amount of O & M cost expended by city and Gun governments, it is evident that the existing irrigation system have been managed ineffectively and deteriorated the facilities comparing that of KARICO. In conclusion, the Government could not satisfied the demand of irrigation water by suppling water with existing irrigation facilities. Therefore new additional investment and financial support for irrigation water development should be made to convert rain-fed and partially irrigated paddy fields into fully irrigated ones. The operation and maintenance cost should be supported to keep the marginal values of rice production of existing irrigation facilities in the national economy and to modernize the obsolete irrigation facilities. By unifying the existing dual O & M systems, all the farmers belong to the irrigated paddy fields have to be equally benefited and could be increased their farm income and be stabilized their rural lives.

• Korean Journal of Agricultural Science
• /
• v.21 no.2
• /
• pp.103-110
• /
• 1994

Since the supply of the Southeast Asian tropical timber decreases and its price steeply increases in the international lumber market, door and window frame manufacturers in this country are eagerly searching for their substitutes. This is the first step to replace Southeast Asian tropical timber by low grade North American softwoods, whose reliable and steady supply is expected, but their appearances are not as good as the tropical timber. In this study, knot distribution on the softwood boards and their warp were examined The yield and production cost were also calculated. The average numbers of knots on a door frame were 7.2 for Douglas-fir and 3.4 for Western hemlock. Only 11% of the knots of Douglas-fir door frames are larger than 5cm in diameter, while are 35% of the knots of Western hemlock. The deformations of door frames, after 2 months air-drying, were measured with a warp table. The deformations of Western hemlock door frames were mostly less than 6mm, while those of Douglas-fir distributed in the range of 0.5 and 9.5mm. The yield of Western hemlock is higher than that of Douglas-fir. It can be concluded that the door frames made of the softwoods are compatible with those made of the tropical timber in most aspects except appearance.

• Proceedings of the Technology Innovation Conference
• /
• 1998.06a
• /
• pp.116-127
• /
• 1998

The Necessity of Cyber University. Within the rapidly changing environment of global economics, the environment of higher education in the universities, also, has been, encountering various changes. Popularization on higher education related to 1lifetime education system, putting emphasis on the productivity of education services and the acquisition of competitiveness through the market of open education, the breakdown of the ivory tower and the Multiversitization of universities, importance of obtaining information in the universities, and cooperation between domestic and oversea universities, industry and educational system must be acquired. Therefore, in order to adequately cope wi th these kinds of rapid changes in the education environment, operating Cyber University by utilizing various information technologies and its fixations such as Internet, E-mail, CD-ROMs, Interact ive Video Networks (Video Conferencing, Video on Demand), TV, Cable etc., which has no time or location limitation, is needed. Using informal ion and telecommunication technologies, especially the Internet is expected to Or ing about many changes in the social, economics and educational area. Among the many changes scholars have predicted, the development and fixations of Distant Learning or Cyber University was the most dominant factor. In the case of U. S. A., Cyber University has already been established and in under operation by the Federate Governments of 13 states. Any other universities (around 500 universities has been opened until1 now), with the help of the government and private citizens have been able to partly operate the Cyber University and is planning on enlarging step-by-step in the future. It could be seen not only as U. S. A. trying to elevate its higher education through their leading information technologies, but also could be seen as their objective in putting efforts on subordinating the culture of the education worldwide. UTRA University in U. S. A., for example, is already exporting its class lectures to China, and Indonesia regions. Influenced by the Cyber University current in the U.S., the Universities in Korea is willing .to arrange various forms of Cyber Universities. In line with this, at JUNAM National University, internet based Cyber University, which has set about its work on July of 1997, is in the state of operating about 100 Cyber Universities. Also, in the case of Hanam University, the Distant Learning classes are at its final stage of being established; this is a link in the rapid speed project of setting an example by the Korean Government. In addition, the department of education has selected 5 universities, including Seoul Cyber Design University for experimentation and is in the stage of strategic operation. Over 100 universities in Korea are speeding up its preparation for operating Cyber University. This form of Distant Learning goes beyond the walls of universities and is in the trend of being diffused in business areas or in various training programs of financial organizations and more. Here, in the hope that this material would some what be of help to other Universities which are preparing for Cyber University, I would 1ike to introduce some general concepts of the components forming Cyber University and Open Education System which has been established by JUNAM University. System of Cyber University could be seen as a general solution offered by tile computer technologies for the management on the students, Lectures On Demand, real hour based and satellite classes, media product ion lab for the production of the multimedia Contents, electronic library, the Groupware enabling exchange of information between students and professors. Arranging general concepts of components in the aspect of Cyber University and Open Education, it would be expressed in the form of the establishment of Cyber University and the service of Open Education as can be seen in the diagram below.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.60-65
• /
• 2004

120 samples of ready-to-eat salad product were purchased at department stores, marts and family restaurants in metro area. Coliform bacteria and food borne pathogenic bacteria were isolated from these samples. In 73 samples among the 120 salad product samples, coliform bacteria and food borne pathogenic bacteria were detected by 60.8％ of isolated rate. Salad were classified into organic and non-organic salad. According to a salad type, salad were classified into vegetable salad and mixed vegetable salad with fried chicken and extra food. According to a packing type, packed salad product and salad-bar product were classified. After the classification, the results of each cases were compared. There is no statistical relation between cultivation or packing methods and contaminated bacteria. But the incidence number of microbial strains was significantly different between vegetable salad and mixed vegetable salad(p＜0.005). In vegetable salad, more various strains were detected. E. coli was isolated in 10 cases among the 90 cases in non-organic vegetable and in 7 cases among the 30 cases in organic salad. Food borne pathogenic bacteria were isolated in non-organic vegetable salad product. Staphylococcus aureus was isolated in 4 cases of vegetable salad product and Salmonella spp. isolated in 1 case. After 5 times examination of each 4 market products, the total number of aerobic bacteria was average 4.8$\pm$0.19 log cfu/g. One sample from this product, saline and a detergent for vegetable were used for 3 minutes to notice the effect. As a result, when saline was used 5 times and detergent for vegetable was used 1 time, bacterial contamination was decreased up to 95.5％.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.118-124
• /
• 2020

We investigated the content of sugar and sodium in 4 types of chicken (fried, seasoned, soy sauce-flavored, cheese powder-flavored). A total of 123 samples were collected from franchise stores and markets in Seoul. The sugar content of chicken samples was analyzed by HPLC-ELSD (High Performance Liquid Chromatography-Evaporative Light Scattering Detector). The average sugar content of seasoned chicken was highest at 8.7±2.3 g/100 g while that of fried chicken was lowest at 0.6±0.3 g/100 g. The average content of sugar sorted by place of sale showed a significant difference (P<0.05). The sodium content in chicken samples was analysed using the ICP-OES (Inductively Coupled Plasma-Optical Emission Spectrometry). The sodium content of seasoned chicken with cheese powder was the highest at 627.0±109.2 mg/100 g and that of fried chicken was the lowest at 448.0±65.3 mg/100 g. The sugar content of seasoned chicken sold in both franchise stores and markets was found to exceed the 50 g daily level as recommended by the WHO. In addition, the average sodium content in seasoned chicken (franchise stores and markets) and cheese-powdered chicken was more than twice as high as the daily 2,000 mg recommended by the WHO.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.179-184
• /
• 2007

The objective of this study was to investigate the contents of meat and non-meat ingredients, calorie, fatty acid composition, and cholesterol contents of processed meat products of which informations are being provided for consumer and partly required for the current labeling system in Korea. A total of sixty-one domestic processed meat products produced from 6 domestic meat companies were collected at the large supermarkets in Suwon city; 1) 31 ham products(3 loin hams, 6 press hams, 20 mixed press hams and 2 fish hams), 26 sausage products(15 pork sausages, 7 mixed sausages and 4 fish sausages) and 4 ground processed meat products. Soy protein and com starch were widely used as non-meat ingredients for the most of processed meat products. The contents of meat, protein, fat, cholesterol contents, and calories were 75-98, 12-23, 1-16%, 7-50 mg/100g, and 1,620-3,127 cal/g for ham products and 60-96, 5-17, 3-27%, 5-73 mg/100g, and 1,271-3,546 cal/g for sausage products, respectively. The saturated(SFA), monounsaturated(MUFA) and polyunsaturated fatty acids(PUFA) contents of ham products were 31-40, 44-53 and 60-72%, and those of sausage products were 17-38, 34-61, and 13-37%, respectively. The ranges of meat contents and nutritional compositions were considerably broad even in the same type of the meat products. Therefore, the labeling system of the nutritional facts for ham as well as sausage products is necessary to categorize the quality level and thus to give the nutritional information to consumer for better choice of products in market.