• 산업공학
• /
• 제12권4호
• /
• pp.595-601
• /
• 1999

Accident analyses are used to identify common factors contributing to occupational accidents and to give recommendations for accident prevention. This study concerns with the accident characteristics and safety management in the small manufacturing industry. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. Two hundred and thirty injury accidents which results in more than 4 days absence were surveyed from the manufacturing companies with under 100 employees. The actual safety problems experienced today in the small manufacturing were also examined by interview method with safety engineers. We propose the safety management programs based on the accident characteristics and the actual safety problems. These results can be used to develop more effective occupational safety and health management policies in the small manufacturing industry.

• 산업공학
• /
• 제13권3호
• /
• pp.348-357
• /
• 2000

SCM(Supply Chain Management) is a new approach to satisfy customers via an integrated management for the whole business processes of the manufacturing from the raw material procurement to the product or service delivery to customers. Typically the semiconductor industry is the one whose supply chain network is distributed all over the world, and its manufacturing process has the particular characteristics which has to be considered in the modeling of supply chain. In this paper we suggest the push and pull type supply chain models based on the manufacturing characteristics and their mathematical formulation for the semiconductor industry. Push supply chain model pursuits the high throughput and the balance of the WIP flow, and pull supply chain model does to minimize the total cost of order-based manufacturing, distribution and transportation process in order to meet customer's request appropriately.

• 무역학회지
• /
• 제42권2호
• /
• pp.1-27
• /
• 2017

본 연구의 목적은 국내 제조 산업의 R&D 투자가 산업의 제품경쟁력과 원가경쟁력의 증대를 통해 높여 수출에 미치는 영향을 살펴보는데 있다. 이를 위해 한국 제조업을 대상으로 20개 업종별로 2004년-2014년도의 자료를 이용해 실증분석 하였으며, 산업의 제품 경쟁력을 신제품 혁신역량과 품질경쟁력으로, 산업의 원가경쟁력을 노동생산성과 자본생산성으로 나누어 살펴보았다. 경로분석을 통해 검증한 분석결과는 다음과 같다. 첫째, 제조 산업의 R&D 투자가 증가 할수록 산업의 신제품 혁신역량, 품질경쟁력, 노동생산성, 자본생산성이 증가하였다. 둘째, R&D투자로 증대된 제조업의 품질경쟁력, 노동생산성, 자본생산성의 향상은 수출 증가에 긍정적인 영향을 미쳤다. 따라서 한국 제조 산업의 R&D 투자는 품질경쟁력과 원가경쟁력의 강화를 통해 산업의 수출 증대에 긍정적 효과를 미친다는 것을 확인하였다.

• 한국안전학회지
• /
• 제26권6호
• /
• pp.79-84
• /
• 2011

There have been so many studies related to job stress or musculoskeletal disorders(MSDs) in the shipbuilding industry. However, study of employee performance evaluation that reflect on the industrial features of the deckhouse manufacturing industry has not been established. Therefore, this study aimed to evaluate workers' job stress and work ability through statistical significance tests according to age, work types, years of service, work forms and sex. For this, the study conducted a job stress test using the Korean Occupational Stress Questionnaire Short Form, and employee performance evaluations using the Work Ability Index(WAI) of the Finnish Institute of Occupational Health (FIOH) on 536 workers in the deckhouse manufacturing industry. MINITAB statistics program was used for statistics analysis and significance was verified with the Kruskal-Wallis test, a corporate body of nonparametric statistical analysis. As a result, employee performance had significant differences, depending on age, work types, years of service and sex, and job stress also depended on the number of service year and work form. Additionally, it was found that employee performance decreased more as job stress increased.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.59-65
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.332-335
• /
• 2017

The national competency standards (NCS) is the national standard for standardizing the skills needed to successfully carry out the duties of industrial sites. It consists of competency units and their sub units. Two standards were developed for the manufacturing of Korean rubber products: rubber compounding and rubber product manufacturing. Each standard consists of ten competency units and their elements. Learning modules will be developed in the near future. It is expected that researchers and workers in the Korean rubber industry will utilize these standards.

• 품질경영학회지
• /
• 제8권2호
• /
• pp.45-58
• /
• 1980

The relationship between the subcontractor and the subcontractor in current industries, especially in the machine manufacturing industry, should be developed to the "Efficient Q-C-D System" in which the three elements of consideration-Quality, Cost and Delivery condition, are in a state of equillibrium. From this point of view the two parts of a subcontract must cooperate in the whole activity: ranging from the initial products planning, through the manufacturing process, to the final usage by customers. In this report, we tried to present Korean machine manufacturing industry with the model of management system of subcontracts in order that machine manufacturers may assure the quality, reduce the production cost and enhance the productivity with the model.

• 무역학회지
• /
• 제47권6호
• /
• pp.211-228
• /
• 2022

With the advent of a recent knowledge-based society, interest in patents is steadily increasing. The patent is an important indicator that can capture the level of R&D investment and technology development. In an era of deepening new protectionism and the pandemic of COVID-19, patents play an important role in sustainable economic development and establishing a strong domestic industrial ecosystem. In this paper, we analyze the impact of patent applications on the corporate performance of the Korean manufacturing industry over the past 21 years from 1999 to 2019. We divide patents into overseas patents and domestic patents and analyze the respective effects on the entire manufacturing industry, ICT industries, and non-ICT industries. Major findings are summarized as follows. First, patents have a positive effect on both exports and sales of Korean manufacturing companies. Second, overseas patents have a greater impact on corporate performance than domestic patents. Third, Patents have a more positive effect on ICT industries than on non-ICT industries.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.219-238
• /
• 1998

The objective of this study was to establish a procedure of concurrent engineering which can be easily a, pp.icable in Korean industry. An investigation of various techniques of concurrent engineering was conducted. Problems of Korean companies which can be resolved by concurrent engineering techniques were identified. Techniques which can resolve these problems at the relatively low cost and without complicated computer facilities were selected and form a procedure for this study. The procedure was a, pp.ied to a manufacturing company for validation. It was found that this procedure can substantially reduce time and cost of R&D and manufacturing.

• International Journal of Quality Innovation
• /
• 제6권3호
• /
• pp.70-94
• /
• 2005

The IC packaging industry heavily relies on shop floor information, necessitating the development of a model to flexibly define shop floor information and timely handle manufacturing data. This study presents a novel data model of product manufacturing flow to define shop floor information to effectively respond to accelerated developments in IC package industry. The proposed data model consists of four modules: operation template setup, general process setup, enhanced bill of manufacture (EBOMfr) setup, and work-order process setup. The data model can flexibly define the required shop floor information and decision rules for shop floor product manufacturing flow, allowing one to easily adopt changes of the product and on the shop floor. However, to handle floor dynamics of the IC packaging industry, this work also proposes a WIP (i.e. work-in-process) system for monitoring and controlling the product manufacturing flow on the shop floor. The WIP system integrates the data model with a WIP execution module. Furthermore, an illustrative example, the MIRL WIP System, developed by Mechanical Industrial Research Laboratories of Industrial Technology Research Institute, demonstrates the effectiveness of the proposed model.