• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.2
• /
• pp.164-172
• /
• 2005

A loss function approach to a multiresponse problem is considered, when process parameters are regarded as random variables. The variation of each response may be amplified through so called propagation of error (POE), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. The forms of POE for each response and for a pair of responses are proposed and they are reflected in our loss function approach to determine the optimal condition. The proposed method is illustrated using a polymer case. The result is compared with the case where parameter fluctuation is not considered.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_2
• /
• pp.89-95
• /
• 2001

The solidification and leaching characteristics of cyclone ash collected from an industrial incineration plant were investigated. Cement and calcium hydroxide were used as the solidifying materials. The leaching characteristics of the solidified cyclone ash were found to vary depending on both the quantitative and the qualitative aspects of the solidifying materials. Except for copper and lead, all the heavy metal ions in the leachate of the solidified material composed of 10~20 % cement or 10~20 % calcium hydroxide were found to be within their standard limit. Moreover, all the heavy metal ions were also observed to be within satisfactory limits in the leachate obtained from the solidified material composed of 30 % cement or 30 % calcium hydroxide. Therefore, to satisfy the standard compressive intensity and permissible limits of heavy metal ions leached from solidified material, it would appear that a 30 % proportion of either additive in the solidification product can meet the required standard for the leachate. The cost of solidifying cyclone ash per ton for ash-30 % cement and ash-30 % lime was calculated as 26,750 and 26,070 won, respectively. Accordingly, significant reduction in the waste toxicity and mobility as well as an improvement in the engineering properties of the solidified products were successfully achieved.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.90-96
• /
• 2013

Since the last 50 years, the terminology 'risk' has been widely used in general and industrial applications, with different meanings. The different definitions of risk can lead to the different risk assessments and risk management process elements, and the misunderstandings. For the reasons, the ISO(International Standard Organization) has recently defined a new risk concept through the publication of IS0 31000:2009. Although the new concept of risk was globally accepted, it seem to be argued in its definition debate. Thus, this paper reviews the definition and meaning of the concept of risk in terms of risk origin, general and industrial applications, related domestic laws and risk management standards published to improve an understanding of risk concept.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.1-14
• /
• 1995

ISO 3951 (1989) Sampling Procedures and Charts for Inspection by Variables for Percent Nonconforming is an acceptable quality level (AQL) type sampling scheme. Sample size code letters and inspection levels in this International Standard correspond to those given in the ISO 2859 (1989), a standard for sampling plans by attributes. Two acceptance sampling procedures can be used ; tabular and graphical methods. The graphs could be used in less critical applications while the tabular method would be available for those familiar with MIL-STD-414 tables and to confirm the results of the graphs when needed. The sampling procedures of the ISO 3951 are matched to the ISO 2859 to enable us to move between them. Composite OC and ASN curves are given for AQL 2.5% and code letter F.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.441-461
• /
• 1995

This research proposes an Integrated Product Information Model (IPIM) using STEP (Standard for the Exchange of product model data) for Computer Integrated Manufacturing (CIM) of Concurrent Engineering (CE). IPIM is based on Geometry and Topology (STEP Part 42), Form Feature (STEP Part 48), and Tolerance (STEP Part 48) for representing the integrated information of mechanical parts. For the IPIM, 1) new entities are developed for integration of existing entities, and 2) the existing entities are restructured and modified for a special application protocol. In CIM or CE, the advantages of using IPIM having integrated form of geometry, feature and tolerance are 1) integration of product design, process design and manufacturing sequentially or concurrently. 2) keep the product data consistency, modified by different domain, and 3) automatic data exchange between different application software and different hardware. The prototype system is composed of CAD, Data Probe, DBMS and SDAI (Standard Data Access Interface), and the generated STEP data is stored in a step file of DBMS for other applications.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.46-55
• /
• 1996

As industrial standard data, the STL format which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system in recent days. Because most RP system take the only form of two dimensional line segments as an input stream inspite of its imperfectness while converting into STL format, a CAD model is converted into a standard industrial format which is composed of many triangular facets. The error verifying process is composed of four main steps, and these are 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to anedge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Correct the wrong direction and normal vectors. This paper is concerned with serching the mentioned errors in advance and modifying them.

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.19-26
• /
• 2015

The amended law of railway safety in Korea has recently come into effect in order to strengthen the railway safety management system. The new law, which took effect March 1, 2014, will implement stricter oversight of railway companies. As a result, a company that manufactures railroad system or components for domestic use must obtain an approval in accordance with the technical specifications of manufacturer approval. Although Korea had established the legal system in enforcing railway safety, the government wants the companies continue to develop the more improved safety systems until they gain competitive edge on the world class railway manufacturers. This paper presents an in-depth analysis of the technical specifications for manufacturer approval in International Railway Industry Standard (IRIS), which is the global standard. This paper also proposes measures and guidelines that would help Korean manufacturers those who want further develop their safety management systems, as a prerequisite for them to obtain the manufacturer approval.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.579-580
• /
• 2006

In this study, an injection mold of tensile test specimen was manufactured by international standard. Pressure and temperature in the cavity of the injection mold was measured by sensors. Simulation of injection molding process was performed with the same condition of experiment and linear structural tensile analysis was also performed with the initial condition of the residual stress induced by injection molding analysis. Normalized elastic coefficient of tensile test was compared with that of structural analysis. It was shown that the residual stress induced by injection molding has an effect on both the experiment of tensile test and linear structural analysis.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.20 no.4
• /
• pp.295-308
• /
• 2016

We propose a projection-based analysis of a new hybridizable discontinuous Gale-rkin method for second order elliptic equations. The method is more advantageous than the standard HDG method in a sense that the new method has higher-order accuracy and lower computational cost, and is more flexible. Notable distinctions of our new method, when compared to the standard HDG emthod, are that our method uses $L^2$-projection and suitable stabilization parameter depending on a mesh size for superconvergence. We show that the error for the solution of the equation converges with order p + 2 when we only use polynomials of degree p + 1 as a finite element space without postprocessing. After establishing the theory, we carry out numerical tests to demonstrate and ensure that the proposed method is effective and accurate in practice.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.129-135
• /
• 1997

Recently, discarding of reuse of fly ashes produced from combined heat power plant of thermal power plant as a by-product causes several problems. Esepecially, the fly ash from Ulsan Pertrochemical Serviec Co, classified as class C is the first by-product to be reused or discarded. For the reuse of the class C fly ash, it is necessary to prepare and provide domestic specifications because there is no specifications on the fly ash of class C from combined heat power plant. Therefore, this study dealt with a scheme of introducing class C fly ash to the korean industrial standard.