• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.203-212
• /
• 2020

This study surveyed 244 employees out of a total of 356 graduates from the steel industry in 2015 to February 2019. The employment rate of graduates is POSCO 67.7%, Hyundai Steel 23.8%, POSCO families 13.1%, and Hyundai Steel families 8.5%. The national certificates acquired by each section were surveyed, with 53.1% of metal section, 39.8% of mechanical section, and 7.1% of other section. Preferred national certificates were POSCO, machinery maintenance industry technicians, steelmaking technicians, and Hyundai Steel followed steelmaking technicians, mechanical maintenance industrial technicians. Among other certifications, the national certificate of industrial safety industrial engineer was preferred. In addition, the average number of national certificates per person for major employment is 5.06 for POSCO, 5.35 for POSCO families, 5.29 for Hyundai Steel, and 4.73 for Hyundai Steel families. The average number of national certificates for S-OIL, KEPCO, Poongsan Metal, etc., is 2.51. In conclusion, it was found that the national certificates related to majors are used as the main evaluation data in finding suitable majors and competency for the job when recruiting talents.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.119-127
• /
• 2016

Since May 23, 2014, the Construction Technology Promotion Act has been effect through the entire reform of the Act. Despite the extensive reform, the previous penalty articles remain intact. According to the article 85 (1), especially, if a service provider or an engineer has caused death or injury by violating the duty of good faith and by damaging the principal parts of facilities, the person should be sentenced for lifetime imprisonment or imprisonment for no less than three years. The article has been controversial in its clarity and adequacy. This study is to verify the characteristics and the scope of the article and to suggest the theoretical backgrounds by analyzing the article based on the principle of legality, which enables to set forth the possibility to improve the article. To achieve the goal, the provision has been analyzed in accordance with the basic laws in Korea including the constitutional law and the criminal law, the related cases have been collected, and the comparison of the relevant acts has been executed. The detailed discussion about the articles in laws and acts on construction and the long-term and integrated study are expected to vitalize through this research.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.104-113
• /
• 1997

This study aims to develop an analysis model using a commercial process simulator-ASPEN PLUS for an IGCC (Integrated Gasification Combined Cycle) system consisting a dry coal feeding, oxygen-blown entrained gasification process by Shell, a low temperature gas clean up process, a General Electric MS7001FA gas turbine, a three pressure, natural recirculation heat recovery steam generator, a regenerative, condensing steam turbine and a cryogenic air separation unit. The comparison between those results of this study and reference one done by other engineer at design conditions shows consistency which means the soundness of this model. The greater moisture contents in Illinois#6 coal causes decreasing gasifier temperature and the greater ash and sulfur content hurt system efficiency due to increased heat loss. As the results of sensitivity analysis using developed model for the parameters of gasifier operating pressure, steam/coal ratio and oxygen/coal ratio, the gasifier temperature increases while combustible gases (CO＋H2) decreases throughout the pressure going up. In the steam/coal ratio analysis, when the feeding steam increases the maximum combustible gas generation point moves to lower oxygen/coal ratio feeding condition. Finally, for the oxygen/coal ratio analysis, it shows oxygen/coal ratio 0.77 as a optimum operating condition at steam/coal feeding ratio 0.2.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.82-89
• /
• 2014

Disasters that destroy homes and infrastructure and cause significant financial damage are becoming more common as population centers grow. In addition, several natural disasters have resulted in a major loss of life and created countless refugees due to damage to housing. After major catastrophic disasters, it is very important that the government agencies respond to post-disaster housing issues and provide resources such as temporary housing before the full rehabilitation and reconstruction of destroyed and damaged housing. To provide affordable temporary housing for residents who may lose their homes as the result of a catastrophic disaster including storms, government agencies must develop a post-disaster housing prototype. In general, government agencies should explore several different forms of factory-built single-story, single family housing, such as modular homes, panelized homes, and precut homes. In urban cities including New York and Seoul, it is very important to provide housing which supports the demand for higher-density living spaces than single-family homes or trailers typically available due to the high population density and the desire to resettle as many residents as possible in their former neighborhoods. This study identified the urban post-disaster housing prototypes that may provide higher density housing with high quality living spaces, high air quality, and energy efficiency as well as rapid deployment. A case study of "Urban Post-Disaster Housing Prototype Program in New York" was conducted through a detailed interview process with a designer, engineer, contractor, the Office of Emergency Management (OEM) in New York, the U.S. Army Corps of Engineers (USACE), and temporary occupants. An appropriate disaster housing program that can provide living spaces for victims of disasters that keeps residents in their community and allows them to live and work in their neighborhoods was developed.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.73-78
• /
• 2016

The Installation, Maintence, and Safety Control of Fire-fighting Systems Act of South Korea regulates that over 30-storey high-rise buildings including underground spaces should vitally perform the Performance-based Design to minimize property damage and personal injury as a fire risk assessment in advance. Therefore a PBD designer such as a fire safety professional engineer evaluate occupant's life safety by a scientific methodology. In order to evaluate the life safety, fire safety designers calculate the Required Safety Egress Time (RSET) which does not have the legal criteria regarding the standard method of calculation yet. So this way has been showing different results depending upon the designer's choice, knowledges and experiences. In this study, RSET calculation methods by six designers respectively were analysed from the thirteen reports of real performance based design projects conducted in Busan for a last five years. In particular, the Response Time calculation methods which have the most powerful effect for figuring the RSET are compared with the other designer's to deduce an error value.

• Journal of Engineering Education Research
• /
• v.8 no.1
• /
• pp.84-98
• /
• 2005

This study is on improving the general engineering education for enhancing the quality of engineers at a local engineering school in which the students are not highly qualified for engineering education. Based on the analysis on the current engineering education by asking questions to professors, students and alumni of Hongik College of Science and Engineering, we have set the basic educational philosophy as educating practical engineers and have decided the goals of basic engineering education as changing to student oriented education, enhancing the field adaptation capability, improving the problem solving ability and introducing engineering design courses. For achieving the foregoing goals, we have changed several basic engineering courses. Mathematics, science courses, computer related courses, English, communication skill related courses are strengthened, but general college education courses are reduced. We also have encouraged students to participate the classes actively and study efficiently, think logically and creatively. For the operational details, we have tried to impose less courses to freshmen and sophomores, to impose the prerequisite courses, to activate summer and winter schools. Finally, we have tried to find the ways to support continuous improvement on the basic engineering education.

• Journal of KIISE:Software and Applications
• /
• v.29 no.4
• /
• pp.211-224
• /
• 2002

As system become larger and more complex, it is important to correctly analyze and specify user's requirements. Use case modeling is widely used in Object-Oriented Analysis and Design(OOAD) and Component-Based Development(CBD). It is useful to mitigate the complexity of the requirements analysis. However, use cases are difficult to be structured, to explicitly represent non-functional requirements, and to analyze what is affected by changes of use cases. To alleviate these problems, we propose scenario-based goal-oriented approach for use case modeling. The approach is to apply goal-oriented analysis method to use case model. Since goal-oriented analysis method is not systematic and heuristics is considerably involved, we adopted scenarios as the basis for the goal extraction. The proposed method is applied to City Bus Information Subsystem(CBIS) in Intelligent Transport Systems(ITS) domain. The proposed approach helps software engineer to analyze what is affected by use case's changes and represent non-functional requirements.

• Journal of Engineering Education Research
• /
• v.10 no.1
• /
• pp.20-33
• /
• 2007

This paper is on the analysis of the survey results for the recognition of the practical engineering education among the engineering educators and educatees including alumni. After performing the survey, we classify 4 forms of practical engineering education, company-oriented, major-field-oriented, basic-engineering-knowledge-oriented and others. Also we survey what are necessary for the students to get employed. The survey results indicate that the respondents understand the practical engineering education as company-oriented and many of them also recognized basic-engineering-oriented engineering education. For the employment, the professors and the alumni focus on the personal character but the students feel that major field knowledge and the English ability are vital to the employment tests. Concerning the opinion for the students on the shortage of ability as an engineer, the professors respond the major field knowledge while the students and the alumni answer the English ability. This research produces some interesting results on the direction of practical engineering education, but needs more detailed and extended survey and analysis.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.326-332
• /
• 2011

Carbon, Aramid, Boron and Glass fibers are used as fibrous materials to promote structural bearing strength. Of these fiber types, carbon fiber is the most commonly used material, and is characterized by having a one-way direction, which is strengthened by tensile strength due to the attached direction only, while other types of fibers are two-way. Therefore, when applied in the field, the attachment direction of fiber is a very important factor. However, when fiber direction is not mentioned in the design drawing, there sometimes is no improvement in structural strength, as the fiber is being installed by a site engineer or workers who lack structural knowledge. The purpose of this study was to propose an optimal direction of carbon fiber through a comparison & analysis of reinforcing efficiency with reinforced experimental columns that used carbon fibers in each of the inclined, horizontal and vertical directions. According to the results, horizontal direction in the reinforced column was improved by 153.43%, but vertical direction was 104.61% only, and it was understood this was due to increased tensile strength along the fiber direction. For this reason, it is necessary to include information regarding fiber direction in design and site management.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.6-6
• /
• 1987

만성중이염은 현재 그 빈도가 줄어드는 추세에 있으나 아직도 이과 영역에서 큰 비중을 차지하는 질환이다. 또한 청력개선, 정상구조의 보존, 병변 제거의 목적을 위하여 대부분 수술적 요법이 필요하게 된다. 이에 저자들은 본 병원에서 시행한 만성 중이염 451예, 남자 238예, 여자 213예. 진주종성 중이염 170예, 비진주종성 중이염 273예에 대한 수술시 소견에 대한 임상 통계적 관찰을 한 바, 다음과 같은 결과를 얻었다. 1) 관찰대상을 술식별로 분류하면 진주종성 중이염과 비진주종성 중이염의 비가 $\circled1$ Myningoplasty ; 19.1% : 0%, $\circled2$ Tympanoplasty without mastoidectomy ; 34.5% : 14.4%, $\circled3$ Tympanoplasty with mastoidectomy ; 3.0% :12.1% 이었다. 2) 고막천공부위는, 진주종성 중이염과 비진주종성 중이염의 비가 변연부천공이 10.1% : 5.5%, 상고실천공이 38.8% : 1.4%, 중심부천증이 12.9% : 47.3%, 전천공이 32.5% : 39.6%, 고막유착이 5.6% : 6.2% 을 보였다. 3) 이소골의 상태는 진주종성중이염과 비진주종성 중이염의 비가, 모든 이소골의 손실은 26.6% : 4.3%, 모든 이소골이 정상에 가까운 예는 16.6% : 69.3%, 가장 병변이 심했던 침골 이상은 76.9% : 24.8% 를 보였다. 4) 중이강 점막소견은 진주종성 중이염과 비진주종성 중이염의 비가, 정상에 가까운 예가 16.7% : 47.0%, 병적 소견을 보인 예가 83.3% : 53.0% 이었다. 5) 진주종성 중이염과, 비진주종성 중이염에서의 안면신경관노출은 2.2% : 0.3%, 뇌막노출은 9.5% : 2.9%, 횡정맥동노출은 5.0% : 1.1%, 미로누공은 1.7% : 0% 이었다.lant, engineering service business can be said "The Software of Total Industry." Engineering service is what is called a higher business which offers specialized engineering know-how and experience. Engineering service compaines offer Its specialized knowledge and experience to government, industry and commerce. Whether the task is to modernize plant equipment, to design a building or to manage construction, an engineering company will develop and implement the most appropriate and cost effective solution. Clients use the engineering service of firm knowing that the engineer′s professional judgement is not influenced or biased by other commercial affiliations. While benefiting from the diverse experience that professional engineers can apply to a specific problem, government and industry also reduce the need for permanent in-house engineering staff. Engineering firms may be specialized or multi-disciplinary.도말표본에서와 같이 제 14 일 이전에는 호중구가, 그 이후에는 단핵구가 주종을 이루었다.>18.9dB