• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
• /
• pp.47-48
• /
• 2017

본 논문에서는 Microsoft Azure 플랫폼의 Azure PowerShell, Azure CLI(Command Line Interface), REST API를 활용하여 클라우드 기반 서비스 포털과 관리 포털을 개발함으로서 중소건설사에서 건설현장의 공사원가 관리 및 일일 관리를 위한 모듈과 서비스 제공을 위해 필요한 서비스 포털 및 관리 포털과 제품 관리 모듈 등 클라우드 서비스 구축 수행하였다.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.204-212
• /
• 2017

The rotor dynamics and balancing technic for rotating equipment during engineering and manufacture stage are to be carefully considered in order to minimize the operation troubles regarding vibration during commissioning stage. In this paper, the test rig, which includes the disks as balancing plane, is designed and manufactured, so that the characteristic of rotor dynamics can be analyzed such as critical speed and mode shape. The critical speed predicted through natural frequency analysis is verified by the actual measurement on bearing housing vibration during start-up condition of test rig. The low speed balancing and the operating speed balancing test are performed respectively with consideration of first critical speed, and the residual unbalance amounts are estimated in accordance with the relevant method described in API standard. In addition, the single and dual plane balancing are carried out on main disk and trim disk depended on phase information at each balancing step.

• 대한통합의학회지
• /
• 제4권3호
• /
• pp.81-91
• /
• 2016

Purpose : This study is conducted to analyze the safe awarenece, its related health education and the employee's requirements in a prime supplier and its subcontractor company, suggesting the proper measure in employee education program. Method : The employees of 'S' construction company and its subcontractor are surveyed during the period of April 15 from May 15 in 2016. The 324 questionnaires are statistically analyzed with the version 21.0 of SPSS. The general characteristics were calculated through the frequency analysis and descriptive statistics. The difference in safe consciousness between prime and subcontractor employee group was analyzed using t-test. Result : The statistics shows the employees in the prime company tend to observe the safe rules rather than the subcontractor employees(p<.005), but the latter are more conscious of safety in working environment than the former(p<.005). In addition, the subcontractor company did not provide his employees with the site for the safety-health education. Conclusion : The small-sized subcontractor company should identify its employees' requirements and supplement the lack of the safety and health education for the prevention of the industrial disasters. In details, the hand-on and practice-oriented leaning and teaching program development are suggested.

• 한국건축시공학회지
• /
• 제13권2호
• /
• pp.102-111
• /
• 2013

During the administration of a construction project, various types of participants are engaged in the project. From the design phase to the maintenance phase, these participants may confront many risks. To avoid these risks, participants should utilize an insurance company or a bond company. The types of risks and liability that a construction manager may face are listed in the construction law or contract. But there are some arguments related to risk transferring and the content of risks. For this reason, construction managers must carefully consider any possible risks in the contract and the construction law. Therefore, for construction managers to deal with risks appropriately, the introduction of a legal requirement to carry professional liability insurance, a defined compensation range for damages, a method of guarantee in the event of defects, a defined compensation claim period for damage, and a method of damage claim were suggested in this study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.149-153
• /
• 2009

Today, the form of competition among companies quickly changes in new paradigm. In the past company activity was performed independently, but now dependently. With global age, that change is essential, the introduction of a system that integrates a series of courses is needed for the success of members. Nevertheless, those change are very slow in construction industry, that causes a lot of loss in project process. Construction industry produce structures with collaboration of other industries. There are difficulties that only one company make it, alone. In this trend, cooperation is essential. but the process of original brings a lot of loss From this perspective, this study will prove dependencies of construction industry. Draw out each factor from industrial cooperation, those analyze correlation with system dynamics. In conclusion, this study performs a basic research about 'Integrated Management System' of construction project.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.460-467
• /
• 2010

In this study, the parameters of the feedwater control system (FWCS) of the OPR1000 type nuclear power plant (NPP) are optimized by response surface methodology (RSM) in order to acquire better level control performance from the FWCS. The objective of the optimization is to minimize the steam generator (SG) water level deviation from the reference level during transients. The objective functions for this optimization are relationships between the SG level deviation and the parameters of the FWCS. However, in this case of FWCS parameter optimization, the objective functions are not available in the form of analytic equations and the responses (the SG level at plant transients) to inputs (FWCS parameters) can be evaluated by computer simulations only. Classical optimization methods cannot be used because the objective function value cannot be calculated directely. Therefore, the simulation optimization methodology is used and the RSM is adopted as the simulation optimization algorithm. Objective functions are evaluated with several typical transients in NPPs using a system simulation computer code that has been utilized for the system performance analysis of actual NPPs. The results show that the optimized parameters have better SG level control performance. The degree of the SG level deviation from the reference level during transients is minimized and consequently the control performance of the FWCS is remarkably improved.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.193-204
• /
• 2023

To ensure radiological safety margin in the transport and storage of spent nuclear fuel, it is crucial to perform source term and shielding analyses in advance from the perspective of conservation. When performing source term analysis on UO₂ fuel, which is mostly used in commercial nuclear power plants, uranium and oxygen are basically considered to be the initial materials of the new fuel. However, the presence of impurities in the fuel and structural materials of the fuel assembly may influence the source term and shielding analyses. The impurities could be radioactive materials or the stable materials that are activated by irradiation during reactor power operation. As measuring the impurity concentration levels in the fuel and structural materials can be challenging, publicly available information on impurity concentration levels is used as a reference in this evaluation. To assess the effect of impurities, the results of the source term and shielding analyses were compared depending on whether the assumed impurity concentration is considered. For the shielding analysis, generic cask design data developed by KEPCO-E&C was utilized.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.133-140
• /
• 2013

The purpose of this study is identifying the relationship among the business strategy, order receiving capability and leverage variables of a construction company using industry characteristic variables, in addition to the explanation variables used in the previous studies. The samples of this study were limited to the construction companies listed in Korean stock market. This study built multiple regression analysis models, which have been frequently used in traditional previous studies, in the explanation of company capital structure. Empirical analysis on Static Trade-off Theory and Pecking Order Theory was done by the built model. The study results suggested that the capital structure determination behavior of a construction company generally follows Static Trade-off Theory; however, profitability was found to follow Pecking Order Theory. The explanation variables used in the previous capital structure studies mostly produced significant results; however, the variables, which this study experimentally used, did not produce significant results. It is believed that it implies that additional studies are required in the selection of variables and study methodology. Consequently, a case that unconditionally supports a particular theory is scarce. It has been also found that a case can support both theories at the same time. Therefore, it is believed that development study methodology or introduction of new study methodology that can identify the dynamic characteristic of construction company capital structure formation is required.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.108-116
• /
• 2004

After the IMF financial crisis, a lot of risks in construction industry have been increased gradually with the expansion of construction industry widely, higher stories of building, and the expansion of the underground space and excavation work. These risks are bringing out construction accidents such as the death, the injury of worker and so on, not so much as it would be effected the corporation's image. In spite of these situations, many construction industries still maintain the wrong methods and not try to decrease construction accidents. Recently, we should focus on the fact that management system of the larger construction also is being good, on the other hand, the condition of the work in the case of smaller construction industries is very poor, construction company have a particular safety management system but it has a difference according to the construction magnitude, construction companies have a particular safety management system but it has a difference depending on the construction according to the construction magnitude. Therefore, this study will suggest the developed way of construction safety management by the comparison and analysis from the difference between the higher and the smaller construction industries.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.141-142
• /
• 2011

This study is a relatively small scale compared to the massive construction company, construction company's safety management level of the low. A small architectural scene safety management is a necessity for basic research as a whole and of 67.20% died in the disaster, which killed the disaster scene in a small building. Small construction site for a reflections of the prevailing security situation, the existing literature and statistical data to determine what the issue, for the purpose of the proposal and come up with improvement measures.