• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.31-38
• /
• 2019

The main purpose of this study is to analyze the impact of the cost estimates on the construction work in residential apartment housing facilities. The planning work of facility construction is roughly divided into five main tasks which are further broken down into the following: process plan (P1-P6), construction plan (C1-C5), environmental management plan (E1-E4), quality management plan (Q1-Q5) and the safety management plan (S1-S5). In this study these tasks were classified into 25 detailed planning duties and a statistical analysis was performed on each one to determine its impact on cost. Finally this study derives from major planning tasks for effective cost management through correlation between planning tasks, cost indicators and t-test.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.291-295
• /
• 2011

A bake-out process using auto switchgear for five days was performed to evaluate the reduction effect of the concentration of volatile organic compounds (VOCs) and formaldehyde in a newly-built elementary school gymnasium. Reduction rates of VOCs were observed as followings: 38.2, 64.2, 86.3, 80.2, and 71.5% for benzene, toluene, ethylbenzene, xylene, and styrene, respectively, which satisfies the indoor air quality standards of newly-built apartment houses in Korea. The reduction rate of total VOCs and formaldehyde were 67.0 and 24.7%, respectively. Those results proved that the bake-out process using auto switchgear was effective for reducing indoor air pollutants.

• Journal of agricultural medicine and community health
• /
• v.47 no.1
• /
• pp.27-39
• /
• 2022

Objectives: The purpose of this research was to explore Fall Risk Home Environment(FRHE) and to investigate the association between FRHE and fall experience among community-dwelling older adults. Methods: The data were collected from 299 older adults using FRHE through observation and interview at home of the participants and were analyzed with SPSS 22.0 applying descriptive statistics, χ²-test, t-test, and logistic regression analysis. Results: The prevalence of fall experience during the past year was 51.5%. 'No handles beside the toilet or bathtub'(73.2%) was most common FRHE factor, 'thresholds in your room or kitchen'(68.9%), 'wearing socks, outer socks, or slipper when you move in the house'(59.5%), and threshold on the gate (apartment entrance)(55.5%) were followed. The findings of logistic regression of FRHE on fall experiences showed darkness of house had the highest Odds Ratio (OR 9.83 95% CI 3.75-25.71), followed by furniture obstructs your walking in the house(OR 7.07, CI 2.88-17.36), dark kitchen (OR 5.13, CI 2.38-11.03). The group having fall experiences presented significantly higher score of FRHE than the group of non experiences of fall. Conclusion: The community dwelling older adults exposures to various FRHE factors and FRHE might increase the risk of falls. Assessing and modifying the home environment could be a good strategy to prevent fall among older adults.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.89-97
• /
• 2022

Recently, various problems such as reduced productivity, insufficient inflow of skilled manpower, reduced quality, and concerns about increasing safety accidents have appeared in the domestic construction industry. Stakeholder of construction project are considering the Off-Site Construction (OSC) method rather than the conventional on-site construction as an alternative. Despite the importance of decision making in the early stage of the adoption of OSC, there is a lack of methodologies for rational decision making. In this study, a decision making system has been developed to derive the final construction cost score by deriving the project characteristics, selecting the construction difficulty index, and developing a cost model for each construction method alternatives to calculate the standard construction cost. Using this system, the OSC method can be effectively evaluated in terms of its feasibility in the early stage of construction

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.3-14
• /
• 2022

Quantitative analysis of the number of construction workers and construction period can present a new standard for appropriate personnel. This study presents a Queueing model that predicts the execution time of work procedures, the most important factor among work efficiency indicators. During the working cycle of apartment frame construction the same process tends to be repeated the volume of contruction. Based on these characteristics, this study used a Queueing Model and analyzed reference layer cycle of the delayed frame construction. After adjusting the number of people and the construction period, the performance of the model was analyzed and suggested. This study aims to support the decision making of personnel distribution according to the volume of construction by performing a performance analysis of the Queueing Model.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.563-571
• /
• 2021

Recently, due to the increase in high-rise apartment and residential-commercial complex buildings, a number of mega-class mass concrete members with a thickness of 3m or more have been designed. As the construction of mass concrete such as transfer beam and slab is increasing not only in foundation members but also in special structures, research on reducing temperature cracks in mass concrete is being conducted. To review temperature cracks in mass concrete, it is important to review the thermal properties of concrete, but it is difficult to use an adiabatic temperature rise tester in the field, so the semi-adiabatic temperature rise test is mainly used. In this study, to improve the accuracy of the results of concrete heat characteristics gained by the semi-adiabatic temperature rise test, various factors affecting heat loss compensation and methods were reviewed and presented.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.107-114
• /
• 2022

In this paper, proposes a delivery robot that can be autonomous driving learning. The proposed robot is designed to be used in park-type apartments without ground parking facilities. Compared to the existing apartments with complex ground and underground routes, park-type apartments have a standardized movement path, allowing the robot to run stably, making it suitable for students' initial education environment. The delivery robot is configured to enable delivery of parcels through machine learning technology for route learning and autonomous driving using cameras and LiDAR sensors. In addition, the control MCU was designed by separating it into three parts to enable learning by level, and it was confirmed that it can be used as a delivery robot for learning through operation tests such as autonomous driving and obstacle recognition. In the future, we plan to develop it into an educational delivery robot for various delivery services by linking with the precision indoor location information recognition technology and the public technology platform of the apartment.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.15-20
• /
• 2022

A single-person-house-holder has been increased since 2000s in South Korea, which led to high demands for small and medium-sized new houses requiring municipal architectural review committee consideration. And it has been argued recently that there are many limitations in the review system. Comprehensive expert surveys and interviews were conducted and the results were analyzed using the AHP to explore limitations in B city. The analysis with the data of 27 survey responds found that 'Related ordinance itself', 'Committee members limitation', and 'Absurdity on administrative procedure' are problematic in order of priority. It is also revealed that architects and administrative officials have different thoughts on the seriousness of those. The results of this study are expected to be used as basic data on studies for improving the system.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.35-43
• /
• 2023

Along with the increase in Multi-unit housing defect disputes, the importance of defect management is also increased. However, previous studies have mostly focused on the Multi-unit housing's 'common part'. In addition, there is a lack of research on the system for the 'management office', which is a part of the subject of defect management. These resulted in the lack of defect management capability of the management office and the deterioration of management quality. Therefore, this paper proposes a machine learning-based defect data management system for management offices. The goal is to solve the inconvenience of management by using Optical Character Recognition (OCR) and Natural Language Processing (NLP) modules. This system converts handwritten defect information into online text via OCR. By using the language model, the defect information is regenerated along with the form specified by the user. Eventually, the generated text is stored in a database and statistical analysis is performed. Through this chain of system, management office is expected to improve its defect management capabilities and support decision-making.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.285-293
• /
• 2023

In this research, we embarked on a meticulous analysis of the challenges inherent in real-world scenarios relating to the durability design standards of engineered concrete structures and the assessment of carbonation durability in concrete guidelines. Our investigation brought to light substantial issues concerning constructability and quality assurance. The genesis of these problems is the exclusive application of prescribed strength to exterior walls, neglecting other elements to facilitate smoother licensing procedures. While this methodology aims to mitigate financial constraints in alignment with enhanced standards, it invariably invites complications. Furthermore, it is imperative to resolve the uncertainty surrounding durability evaluations by establishing a clear and definitive objective. Alongside this, actionable steps must be formulated to forestall the emergence of fissures between the floors of residential buildings, particularly apartment complexes. It is equally essential to tackle issues connected to application by devising a comprehensive management strategy for potential cracking during the phase of maintenance.