• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.477-487
• /
• 2011

The modified repeat-sales model is employed in this study in order to identify differentiating impacts of time-varying accessibility characteristics on housing price. The results demonstrate that accessibility measures have very differential impacts on housing price over time. The improvement of accessibility through newly built facilities and apartment complex has either increased or decreased housing price. For example, the new subway line 9 has positive impact on housing price nearby, therefore price gap between subway access area and the other parts has been increased. The impact of the wide area facilities such as shopping center and hospital are decreased because they can be used more easily by the new subway line before. However, the small service area facility such as elementary school doesn't lose their impact even though subway accessibility extremely increased. The results imply that new facilities in existing residential site can affect not only housing price but also the other facilities' impact of housing price.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.9
• /
• pp.468-474
• /
• 2015

When oil is used for cooking in detached or apartment houses, large amounts of oil-mist, smoke, and particulate substances are generated and dispersed into the indoor-air environment. These pollutants diffuse into the surroundings and spread their odor while rising fast at a high temperature due to the heat energy from the gas range. Although the exhaust gas is discharged from the exhaust hood, which is installed on the top of a gas range to remove the diffuse pollutants, the exhaust conditions can vary greatly because they depend on the shape of the exhaust hood and the discharge rate. In this paper, the air that is required for the gas-exhaustion process is supplied by an air curtain that surrounds the kitchen hood, and the pollutant-capturing efficiency varies depending on the angle of the discharge grills; the pollutant-capturing efficiency was studied using a numerical-analysis method. The results indicate that the pollutant-capturing efficiency is not significantly changed by a change of the discharge-grill angle at a low air-discharge rate; however, at a high air-discharge rate, the efficiency value increases with an increase of the discharge-grill angle, whereby the best value occurs at 30 degrees and the efficiency decreases above this angle. Below 30 degrees, the effect of the discharge rate on the capturing efficiency is more than that of the discharge-grill angle.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.6
• /
• pp.247-256
• /
• 2014

The regulations to reduce energy consumption and carbon dioxide emission in building sectors are being developed and promoted all over the world. However, in Korea, as balcony extension of the apartments has been legally allowed, it became prevalent and resulted in excessive energy consumption. This study derived the possibility of PCM application to the thermal storage wall system through theoretical consideration and investigated the problems occurring when the balcony space has been extended to the diverted space. In addition, this study aims at the possibility of verifying the installation and confirming the cooling energy reduction effect, by conducting measuring tests with the actual installation of PCM applied thermal storage wall system. As a result of theoretical consideration, it is determined that the disadvantages with the existing thermal storage wall system can be complemented by applying PCM, and this study suggests the PCM applied Thermal Storage Wall System. The study was conducted on 1/6 of a miniature inner room of a domestic apartment with 84 $m^2$ of exclusive area. From the results of actual measurements, it is confirmed that the balcony extension structure can gain 11.3% of more calories than the existing balcony structure, resulting in the increase in cooling energy usage. It is determined that the installation of the PCM applied Thermal Storage Wall System may gain 25.2% of less calories to reduce cooling energy usage.

• Survey Research
• /
• v.8 no.2
• /
• pp.1-19
• /
• 2007

This paper explores the extent to which property scale, in particular housing price is useful as the measure of an individual's economic status. Its main object is to compare the distributions of the measure of housing wealth and other objective or subject measures, i,e., reported income and subjective class identification. Additionally, their relations to other variables are examined. An analysis of distributions and cross-tables based upon national survey of 2005 family and the database of apartment price of Kookmin Bank are used. It is shown that the measure of housing wealth differs from other economic status measures in terms of distribution and the relations to other variables, such as attitude variables and consumption-related variables. Its results also suggest that the measure of housing wealth can be applied to various areas as a new measure of an individual's objective economic status, in such a way to improve applicability of social survey.

• Survey Research
• /
• v.11 no.1
• /
• pp.123-144
• /
• 2010

In new sample design for Korea Housing Survey to research about housing policy, total strata are forty five because individual results of sixteen regions are estimated. The sample size is determined by sample errors of several variables which are the living area, family income, householder income, and living expenses. The sample size of each region is determined by relative standard error of existing result, and the strata sample size is to use the square root proportion allocation. Enumeration districts are sampled by the probability proportion to size systematic sampling in proportion to the enumeration district size, and the systemic sampling to use assortment characteristics. We considered a new apartment complex because of variation reflections which are rebuilder and redevelopment of houses. To get estimators of mean and variance, we used the design weighting, non-response adjusting, and post-stratification. In order to consider estimation efficiency, we calculate the design effect using estimators of variance.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.30-36
• /
• 2014

The pressurized smoke control system in the vestibule is important for fire safety in buildings because it is concerned with egress time of people and the safety of fire fighters. The vestibule pressurization system can prevent smoke from entering the vestibule using differential pressure when fire doors are closed and using the egress velocity when fire doors are open. Air supplying units in the vestibule need to be arranged by taking account of the location of doors and the volume of the vestibule in order to assure the uniform air egress velocity through a fire door when it is open. In this study, computational fluid dynamics (CFD) simulations were conducted for the vestibule where multiple doors are installed and it was found that the reverse flow occurs when the damper position in vestibule is not appropriate.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.111-124
• /
• 1995

On development of mountaneous or hilly area, stability of cut slope should be provided to prevent undesirable landslides. When piles are used as a countermeasure to stabilize existing landslide, stabilities for both piles and slope should be simultaneously satisfied to obtain the whole stability of the slope reinforced by piles. In order to confirm the effect of stabilizing piles on slope stabilization, it is necessary to investigate the behavior of the slope, in which the piles are installed. In this paper, first, the countermeasures used commonly to control unstable slope in Korea were summerized systematically. Nezt, the behavior of piles and slope soil was investigated by instrumentation installed into a cut slope for an apartment stabilized by a row of piles. Instrumentation could present sufficient effect of piles on slope stabilization Construction works in front of the row of piles affected the displacement of piles and slope. The construction works were divided into four stages, i.e. initial cutting stage of slope, excavation stages for retaining wall and parking space, and construction of retaining wall. As the result of research, the applicability of the proposed design method could be confirmed sufficiently.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.307-313
• /
• 2002

Urban style row-rise houses for rent have been supplied to the center of city from the 1950's first half The amount of stock is about 450,000 houses and occupies about 40％ in the private rented house. As for the structure, the 60％ of them is wooden-structure and the rest is non-wooden. Stocks of 57.5％ of the wooden-structure and 86％ of the non-wooden were built after 1981 years. It was 1981 years that the new earthquake-resistant standard was carried out, the improvement of stocks built before 1981 is necessary because those don't satisfy the present standard. To investigate the renovation possibility of urban style row-rise houses for rent, actual situation of two-story apartment at 2,4, and 5 Chome Taito-Ku in Tokyo was surveyed from July to November 2001. The number of building analyzed is 227 ridges among 234 ridges of the surveyed two-story building. 90％ of building analyzed is wooden structure. 1) The site of 88％ building surveyed is close to a road less than 4m width. It becomes the existing non-conformed building in the building construction act. It is impossible to make a renovation such as rebuilding, extension and remodeling because it requires the set back when renovating this type of non-conformed building, 2) The building built before 1981 is almost wooden-structure, and occupies 37％ of the building surveyed, and doesn't satisfy the present earthquake-resistant standard. An improvement of them is needed because the decrepitude of building proceeds. 3) 50％ of openings and 40％ of windows of the building surveyed doesn't use noncombustible materials. Though it becomes the existing non-conformed building, it can satisfy the present standard by replacing openings with noncombustible materials.

• Journal of Families and Better Life
• /
• v.20 no.1
• /
• pp.103-114
• /
• 2002

Housing is a central place fur elderly and it can be influenced to the quality of life for them. Most low income elderly has much problems on their housing. It needs to be developed for more various ones which considered in the way of their economic and physical conditions. This case study was aimed to supply (or a basic data for developing a housing for tow income elderly through the analysis of elderly housing of Melbourne in Australia. This study evaluated two types of government housing and five types of community housing available to elderly People on low income allowing them to live independently. Results of the research were as follows. 1) High rise apartment living was differentiated from other housing types. Such accommodation had drawbacks, for example it made the elderly difficult to get along with neighbours. 2) Community housing had more various types of housing than government housing and was aimed at encouraging community interaction between residents. Some community housing residents joined the management of the housing committee. As a result, it made the elderly very confident and promoted a good relationship between them and young generations. 3) The strength of community housing was that the elderly could choose the place to live within the community which was familiar to them. 4) The managers in broth government housing and community housing had many roles as adviser and mediator for residents as well as managing the complex. 5) A policy of housing for low income elderly is changing now from management by government appointees to one governed by the community 6) Most elderly prefer to live close to facilities such as medical and shopping centers and convenient transportation and wished to remain in their familiar community as long as possible.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.4
• /
• pp.123-129
• /
• 2002

This research is aiming to specify the requirement of the investment such as initial cost, running cost earning rate to make effective investment considering the purpose of remodeling and economical value of store building enough to meet the initial purpose of remodeling. The review of earning rate for economical evaluation was performed by the on-site auditing on the structure and function of the building and applying the assessment simulation program, which is to find the possible business model to identify the requirement of building owner through case study. After the research, the following results are obtained. First, it is important that many aspects should be carefully analysis and the best method should be selected as characteristics of remodeling can tie defer each other in their implementations. Second, though the remodeling of exist buildings to promote the functions has been applied. no suitable assessment tool has bee developed for deriding the level of remodeling in the view of economical efficiency so far. Third, the economical benefit was evaluated by analysing annual earning rate which is applied by investment items and recovery period for the investment. More specific data base should be established to apply the suggested economic accession in business enough to forecast the future circumstances. More researches should be promoted on this area continuously as well as the integrated economic evaluation of remodeling on existing building.