• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.191-200
• /
• 2011

A way to adsorptively remove indoor carbon dioxide at relatively lower concentration under ambient temperature was studied. A small lab-scale carbon dioxide adsorption and desorption reactors were prepared, and 5A and 13X zeolites were packed in this reactors to investigate their adsorption and desorption characteristics. The inflow carbon dioxide concentration was controlled to 5,000 ppm, relatively higher concentration found in indoor spaces with air quality problems, by diluting carbon dioxide with nitrogen gas. The flow rate was varied as 1~5 L/min, and the carbon dioxide concentration after this reactor was constantly monitored to examine the adsorption characteristics. It was found that 5A adsorbed more carbon dioxide than 13X. A lab-scale carbon dioxide desorption reactor was also prepared to investigate the desorption characteristics of zeolites, which is essential for the regeneration of used zeolites. The desorption temperature was varied as $25{\sim}200^{\circ}C$, and the desorption pressure was varied as 0.1~1.0 bar. Carbon dioxide desorbed better at higher temperature, and lower pressure. 5A could be regenerated more than three times by thermal desorption at $180^{\circ}C$. It is required to modify zeolites for higher adsorption and better regeneration performances.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.1
• /
• pp.117-125
• /
• 2011

There are many studies reporting the average carbon dioxide levels in various indoor spaces. However, there have been a few studies showing how carbon dioxide concentration varied at many measurement points in one indoor space. In this study, the changes of indoor carbon dioxide concentration at classroom, library, and kindergarten were reported to find its carbon dioxide distribution change at various locations and altitudes. The maximum carbon dioxide concentration of the 3 sites were measured as 2,684, 2,295, and 1,526 ppm, respectively. These values exceeded the guideline concentration of 1,000 ppm for public places. The concentration of carbon dioxide was higher at upper area than lower area, and this is probably due to the rise of warm breathing air generated from students. In the upper area, the carbon dioxide concentration was higher at center area than four corners. However, in the lower area, the carbon dioxide concentration was higher at four corners than center area. Therefore, it could be concluded that the center of upper area is the best place for the installation of ventilation or carbon dioxide removal system.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.466-470
• /
• 2015

In this study, Fenton oxidation was applied to railroad track ballasts contaminated with small amounts of oil. In order to perform the experiment on Fenton oxidation, petroleum contaminated ballast was collected from the railroad track and experiments on major factors of the remediation process were implemented in the laboratory. Then, the feasibility of insitu Fenton oxidation was investigated for the railroad track that was partially contaminated with oil. As a result, the residual TPH concentration of ballast was reduced to about 1,000 mg/kg-ballast in laboratory experiments using 0.1 mol Fe/L $H_2O_2$. Due to the drainage structure of the track bed, a considerable amount of $H_2O_2$ was released below the ballast without the sufficient reaction with the contaminated ballast; therefore, additional studies are necessary for the effective field application of Fenton oxidation.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1169_1170
• /
• 2009

This paper introduces insulator pollutant accumulate pattern in the tunnel of korea railroad. To accomplish this goal, effective sample collecting method was proposed for the first step. Dust at the surface was collected directly. Distilled water and brush was used while collecting. Through this method dust is easily and accurately collected. The second step is pollutant analysis. Several analyze item is selected such as quantity, conductivity, contact angle, Optical Microscope(OM), IR, Equivalent Salt Deposit Density(ESDD), and ICP-AES. The third step, best represent tunnel was selected considering location, length and natural surroundings. Also to consider the difference at inside the tunnel, several bracket insulators were selected along to the location. To make the result precise, above procedure was repeated several times at the same target. Finally relation among type of train, numbers of movement, surroundings, length will be considered in combination with the pollution. With this result pollute map for KORAIL could be accomplished and inspect period will be optimized case by case.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.226-228
• /
• 2004

In this study, temperature sensors were adhered to transformer that is used in KHST(Korean High-Speed Train) to verify variation of temperature characteristics about transformer synthetically and efficiently. In the case that temperature of transformer exceeds reference temperature for running of KHST, overheating of transformer may cause a fatal accident of vehicle. Therefore, after on-line measuring system was constructed in vehicle, oil temperature and tank temperature were measured on real-time. Characteristics and main specifications of transformer in KHST were described in this paper Also, measuring system for temperature measurement of transformer was explained in brief. Temperature data of transformer was acquired using measuring system, KRRI(Korea Railroad Research Institute) analyzed characteristic in contrast with comparing with temperature of transformer about month, running speed and running time.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.435-437
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean hish speed train. The software controls the hardware of the measurement data and acts as interface between users and the system hardware. In this paper, we is studied for electric apparatus performance of railway vehicle using sensor. In order to this test is developed signal conversion system. Using this system, we obtained important result for pantograph voltage, battery voltage, axle speed, and running speed.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.248-250
• /
• 2004

Following the needs for increment of public transportation system electric railroad system should be expended. There are several solutions to expend. One of these solutions is to reduce the interval between two railroad vehicles. However, it cannot be reduced too much because reduction of interval means increment of loads and induces supplying voltage decrement. In this paper, voltage variation according to railroad intervals is simulated and optimal operation in railroad system is proposed.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.371-374
• /
• 1998

The construction of the transportation history database system is to serve the scheduling and seat inventory controling. Recently, lots of countries have been faced with the advance era because of the new railway transportation system, like the high speed railway and/or magnetic levitation vehicle system. This can be reasonably translated as those of operators are willing to provide the more various and high quality schedule to the customer. Those operators these ideas make possible to forecast that scheduling process is going to be complicated more and more. The seat inventory control, so to speak Yield Management System(YMS), goes a long way to improve the total passenger revenue at the railway business. The YMS forecasts the number of the last reservation value(DCP# END) and recommends the optimal values on the seat sales. The history database system contains infra-data(ie, train, seat, sales) that will be the foundation of scheduling and seat inventory control application programs. The development of the application programs are reserved to the next step. The database system is installed on the pc platform (IBM compatible), using the DB2(RDBMS). And at next step, the platform and DBMS will be considered whether they can meet the users' requirement or not.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.358-369
• /
• 2001

KTX will be operated on Kyun-Pu High Speed Railroad Line around end of 2,003 and KHST(G7 Korea High Speed Train) will be carried out the development running test at Kyun-Pu High Speed Railroad Line from middle of 2002. By the way, the conventional Ho-Nam railroad line was passed the limit capacity of transportation at some area from 1997. For solving of this matter, Ho-Nam railroad line need new high speed railroad line for high transportation capacity of passengers now. This report was studied about the rolling stock system design used new technology of KHST and KTX for Ho-Nam High Speed Railroad.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1394-1400
• /
• 2008

This study investigates the Failure Modes, Effects and Criticality Analysis (FMECA) Method for the railroad vehicle. Recently, RAMS (Reliability, Availability, Maintainability and Safety) is one of the most important issues in the railroad industry. FMECA is prerequisite for the RAMS Analysis, and it is a procedure to identify the potential failure modes and their effects and to reduce or mitigate the critical effects on the system. FMECA is used in various industries and it is specialized in each industry. For instance, MIL-1629a and SAE-J1739 are specialized FMECA method for Military industry and Automotive industry, respectively. Although the railroad industry requires the high reliability system, it does not have a specialized FMECA yet. Thus, in this paper, an FMECA method specialized to the railroad vehicle was proposed through analyses and comparison of the MIL-1629a, SAE-J1739 and IEC-60812 standards.