• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.223-228
• /
• 2010

Recently, the various information according to the company management is originated in the change of the rapid company environment. And the necessity of the administration,that is systematic and efficient toward the various document of a form, is gradually increased. At the same time, the efficient management ability of the various standard document obtained the specialized quality authentication system including the ISO/TS16949, ISO14001, quality 5 star, and etc., it maintains occupies the very important part as to the company management. This research suggests the standard business process of the auto part supplier for the efficient management of the standard document. In addition, by building and managing the standard management system will be able to expect the more efficient document management and the product reliability insurance.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.3
• /
• pp.337-344
• /
• 2005

Objectives : Job insecurity, such as non-standard work, is reported to have an adverse impact on health, regardless of health behaviors. The aim of this study was to examine the relationship between non-standard employment and health in Korea. Methods : We analyzed a representative weighted sample, which consisted of 2,112 men and 1,237 women, aged 15-64, from the 1998 Korea National Health and Nutrition Examination Survey. Non-standard employment included part-time permanent, short time temporary and daily workers. Self-reported health was used as a health indicator. Results : This study indicated that women were more likely to report poorer health than men with standard jobs. Of all employees, 20.3% were female manual workers. After adjusting for potential confounders, such as age, education, equivalent income, marital, social and self-reported economic status and health behavior factors, nonstandard employment was found to be significantly associated with poor health among female manual workers (OR, 1.86; 95% CI, 1.24 to 2.79). No significant association was found in other working groups Conclusions : Among female manual workers, nonstandard employees reported significantly poorer health compared with standard workers. This result raises concern as there are increasing numbers of non-standard workers, particularly females.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.129-143
• /
• 2003

Bsusiness-to- Business transactions requires interactions between diverse application s and business. This gives rise to the need to for a common standard and protocol for exchanging busienss messages. and RosettaNet is the leading industry organization focused on developing B2B process standard for a global supply chain. This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for E-commerce applications to quickly incorporate new standards. Supply Chain Management (SCM) helps companies plan and execute supply to meet customer demand. The researches of modem scientists have thrown new light on the subject. but, The study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM system, which require to introduce the functions of EC, needs to be changed. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems. This provides felxibility in incorporating any new emerging open standard.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.189-193
• /
• 2011

The current standard cost for recycling applied under the Extended Producer Responsibility(EPR) institution, is not coping with continuously increased number of obligatory subject items as well as a variety of variable cost changing factors regarding the recycling treatment cost caused by price fluctuation such as increased material and labor cost entirely across the society; changes in recycling treatment process following the developing technologies; and changes in the required work forces and equipments followed by the trends of automated facilities. Despite such various cost fluctuation factors, the current EPR is not coping with the trends, making the re-calculation process difficult, which causes differences between the real treatment cost for recycling. In this study, the analysis was made on main factors affecting on the related cost and the related price changing index was calculated, by conducting the influence evaluation on the standard cost factors of the current standard cost for recycling. Through theses results, more objective standard will be set for the re-calculation of standard cost for recycling to greatly contribute to setting up the midterm and long-term strategies in the future towards efficient institution.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.153-168
• /
• 2011

In medium and small firm, the management system which is simple and where there is a practicality is required Ill)re than the management system which is complicated and minute of the centered around large company so that the introduction of the standard costs can be activated and it can be usefully used as a tool of management decisions. A difference between the standard costs introduction plan proposed in this paper and the preexistance study literature are as follows. In this paper, by breaking from the whole cost accounting aiming at all item, that is the traditional introduction method, and presenting the product cost accounting method by group the standards setting object was minimized and simplified. In this way, if the standards setting object is simplified, it is quick at the perimeter environment change as the little man power and flexibly it corresponds to and the cost information calculation which is exact with the setting up and maintenance of the efficient cost standard becomes available. As a result of applying for real through S corp., the usability of the method that the standard costs introduction method proposed in this paper produced the standard costs relatively short within period, it manages was verified. And the standard costs introduction method proposed in this paper went by the various cost information for each products, the management class did the management will decision which was objective and reasonable in the putting first.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.302-308
• /
• 2021

Developers generally use test standards suggested by military standards such as MIL-STD-810G when performing vibration tests in the materiel development. However, according to MIL-STD-810G, it is recommended to test by tailoring the test standard suitable for the developed materiel, and it is specified to apply the suggested test standard only when there is difficulty in tailoring. In addition, the test standards presented by MIL-STD-810G are standards created under operating conditions different from the actual operating environment of each developed materiel, so the test according to this standard may be excessive or understated. Therefore, the developer must create an appropriate vibration test standard for the developed materiel as similar to the operating conditions as possible. In this paper, the procedure for creating the functional test standard and durability test standard suitable for the operating environment of the equipment to be mounted on the propeller aircraft under development is described, and the created standard is introduced.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.99-121
• /
• 2017

Standard makers in both private and public sectors have been increasingly mandating security standards upon organizations to protect organizational digital assets. A major issue in security standardization is that standards often cannot regulate all possible security efforts by the standard maker because some efforts are unverifiable by nature. This paper studies from an analytical perspective how a standard maker should design the standard using a verifiable security control in the presence of another related unverifiable one. We compare it with two benchmark standards; $na{\ddot{i}}ve$-standard which refers to the standard maker who ignores the existence of the unverifiable control, and complete-information standard which refers to the maker sets standards on both controls. Optimal standard and benchmark standard depend critically on how the two controls are configured. Under parallel configuration, the existence of the unverifiable control induces the policy maker to set a higher standard (the complete-information standard is optimal); under serial configuration, a lower standard is applied (neither benchmark works). Under best-shot configuration and if the verifiable control is more cost-efficient, the existence of the unverifiable control has no impact on the optimal standard (the $na{\ddot{i}}ve$ standard is optimal).

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.484-488
• /
• 1997

Fission product release (FPR) assessment for 100% reactor outlet header (ROH) break in CANDU reactor loaded with CANFLEX-NU fuel bundles has been performed. The predicted results are compared with those for the reactor loaded with standard 37-element bundles. The fuel failure thresholds for the CANFLEX and standard bundle elements are very similar. All the sheaths at the corresponding fuel failure thresholds for the CANFLEX and standard bundles fail due to the significant cracks in the surface oxide, except those for the CANFLEX inner element at burnups of 220 to 240 MW.h/kg(U), which fail due to the excessive diametral strain. The fuel failure analysis predicts that the number of failed fuel elements for the CANFLEX bundle case is none, while that for the standard bundle case is 1827. The total (gap plus bound) I-131 releases for the CANFLEX and standard bundles are none and 5889 TBq, respectively The significant reduction of the number of failed fuel elements and FPR for the CABFKEX fuel bundle is attributed to the lower linear power of the CANFLEX fuel bundle compared with the standard fuel bundle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.151-156
• /
• 2008

Many kinds of mass spectrometer type leak detectors have been widely used for detecting leak of vacuum processes in semiconductor and display industries etc. The leak detectors should be often calibrated by the permeation type standard leak in order to ensure accurate and reproducible leak measurement. We have developed a comparative calibration system for permeation type standard leak by using mass spectrometer type leak detector and specification of the calibration method. Following this technique the reliable calibration for leak standard ran be performed even in fields.

• Publications of The Korean Astronomical Society
• /
• v.19 no.1
• /
• pp.93-99
• /
• 2004

In this paper, we describe a principle of the atomic frequency standard and clock system in VLBI(Very Long Baseline Interferometry). The hydrogen maser is a usual VLBI standard. During VLBI observations, signals emitted by distant sources of radio frequency energy(quasars) are received and recorded at several antennas. At each antenna(VLBI station), a very stable frequency standard(hydrogen maser) provides a reference signal which enables time-tagging to the quasar signals as they are being recorded on magnetic tapes or hard-disk modules. For each VLBl experiment, correlation of the time-tagged recorded information between the participating antennas is used to yield the arrival time differences of any specific quasar radio wave between the antennas. These time differences are used to calculate the relative antennas to each other. In this paper, we also introduce the KVN(Korean VLBI Network) atomic frequency standard and clock system.