• KIEAE Journal
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2014

In the previous test, the verification of the standard floor impact source was carried out comparing the physical characteristics with living impact sources. The result was appeared the validation of the standard impact source was very low because of differences of physical characteristics. This study aims to evaluate annoyance and loudness of standard impact source which is used for the measurement of floor impact sound, and to compare the annoyance and loudness of living impact sources which are produced in real life. The impact sources considered are tapping machine, tire and impact ball as standard sources, and nine real sources which were chosen from the existing researches. The result showed differences of annoyance and loudness between standard impact sources and living impact sources, which means the standard impact sources may rate the performance of floor system inappropriately. In the future, the rating method should be examined how the standard impact sources are similar with real sources in the point of rating the performance of floor system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.719-724
• /
• 1998

A preliminary fuel channel analysis for 35% reactor inlet header (RIH) break in CANDU reactor loaded with the CANFLEX-RU fuel bundles has been performed. The predicted results are compared with those for the reactor compared with those for the reactor loaded with standard 37-element bundles. The maximum fuel centerline and sheath temperatures for the CANFLEX-RU bundle channel were lower by 338 and 122 $^{\circ}C$, respectively, than those for the standard bundle because of the Bower maximum linear power of the CANFLEX-RU bundle In spite of the 0.4 FPS higher power pulse of the CANFLEX-RU bundle case. Fuel integrity margin to fuel breakup for the CANFLEX-RU bundle is about 50 J/g higher than that for the standard bundle. The PT/CT contact for the CANFLEX-RU bundle occurred 2 s later than that for the standard bundle. The PT/CT contact temperature for the CANFLEX-RU bundle was 2 $^{\circ}C$ lower than that for the standard bundle. These provide the CANFLEX-RU bundle with the negligibly enhanced safety margin for the fuel channel integrity in CANDU 6 reactor, compared with the standard bundle.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.473-481
• /
• 2022

This is a descriptive research study attempted to identify the relationship between standard precautions knowledge, standard precautions attitude, social support, and standard precautions compliance of nursing students, and to identify factors influencing standard precautions performance. The subjects of this study were 170 nursing students from 3 universities located in G city. Data analysis was performed using the SPSS 24.0 program and was analyzed by multiple regression. As a result of the study, it was found that the factors affecting nursing students' compliance of standard precautions had a positive effect in the order of social support and knowledge of standard precautions. Therefore, it is necessary to develop a systematic educational strategy and program configured to enhance the standard precautions knowledge content and to positively recognize and reinforce social support in order to increase the standard precautions compliance of nursing students.

• Journal of Environmental Health Sciences
• /
• v.36 no.6
• /
• pp.456-464
• /
• 2010

Recently, heavy metals contamination of the agricultural soil and crops surrounding mining areas has been identified as one of the most serious environmental problems in South Korea. The Ministry of the Environment in Korea conducted a Preliminary National Environmental Health Survey (PNEHS) in abandoned metal mines in 2007. The priority for a subsequent detailed examination was ranked from the results of PNEHS. The studied mine which was ranked as being of the highest priority is located in the midwestern part of Korea and was operated from 1911 to 1985. In this study, the contamination levels of the heavy metals in the abandoned metal mine were investigated. From the results, the average daily dose (ADD), target hazard quotient (THQ) and target cancer risk of the heavy metals were evaluated. The concentration of arsenic (As) in all of the tailings from the mine was higher than its countermeasure standard of Korea. In particular, the highest concentration of As, 330 mg/kg, was up to 15 times higher than its countermeasure standard. The average concentration of As in agricultural soils was higher than the warning standard of Korea, and higher than its countermeasure standard at six sites. The average concentrations of the analyzed heavy metals in agricultural soil were below the warning standard, but concentrations of cadmium (Cd) and lead (Pb) at 4 sites were higher than its warning standard. The average concentration of As in surface water exceeded the warning standard of Korea. The value of the THQ of As for the tailings was higher than the health protection standard 1. The value of THQ of As for the farmlands was lower than the standard, while the hazard index (HI) of As was higher than the standard. The value of target cancer risk (TCR) of As, $6.44{\times}10^{-4}$, were higher than the health protection standard of a lifetime risk for TCR at $1{\times}10^{-6}$. This suggests that the residents around the metal mines are exposed to As pollution with a carcinogenic risk.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.675-676
• /
• 2008

The computer based three phase power analysing system has been developed as a traveling standard for onsite power calibration. The system is utilized with digital-to-analog converts which were synchronized each other. Using digital signal processing technique the software has been developed to calculate power parameters. The calibration system is fully traceable to national standard system and, accuracy allows the calibration of industrial power measurement systems.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.7-14
• /
• 2008

In this study, four alternatives for the arrangement of Korean alphabets on computer keyboards are developed and analyzed to find the better design than the KS(Korean Standard) keyboard. Among the developed four modified models MOD 1 to MOD4, we suggest MOD3 as the best design which incorporates the keys usage frequencies and the compatibility of present standard.

• Journal of the military operations research society of Korea
• /
• v.12 no.2
• /
• pp.56-67
• /
• 1986

This paper is concerned with a standard size system and production proportion of combat boots. For the standard size system foot sizes of 327 soldiers were mesured by Martin type anthropometric equipment. 24 foot measurements were obtained on all individuals. The standard size system of which key measurements are foot length and joint girth are proposed on the basis of the statistically treated measurement data. The production (or purchasing) proportion of the proposed size system of combat boots are also proposed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.27-35
• /
• 2018

Purpose: The diverse users and the increase of power wheelchair users have made it difficult to apply the standards of Wheelchair user accessible toilet rooms for the existing law and BF-certification. To address these issues, the standards of the relevant laws have been improved (Ministry of Health and Welfare, 2018), but there are still many problems. In this study, problems with the standards for Wheelchair user accessible toilet rooms in Korea are analyzed by comparing national and international standards. In addition, improvements to standards for Wheelchair user accessible toilet rooms will be suggested. Method: It presents improvement for standards of Wheelchair user accessible toilet rooms by comparing national, international standard and standards of many countries. Korean standard, International Standard(ISO 21542), American Standard(ADA Standards), German Standard(DIN 18040-1), Austrian Standard($\ddot{O}NORM$ B 1600) and Swiss Standard(Norm SIA 500) were investigated and analyzed. Results: Korea's standards differ from the ISO and the Standards of other countries in many ways, so there is a need for realignment. Specifications for disabled toilets and clear criteria for the size, shape, and location of sanitary appliances in toilets that are practically available to wheelchair users should be provided. Considering the increasing number of disabled toilet users, the installation of various disabled toilet rooms should be considered considering the user characteristics of those who can walk and wheelchair users. Implication: Recent partial improvements to relevant laws cannot meet the requirements of various users. Therefore, comprehensive and clear standard should be presented that take into account changing society and the environment.

• Journal of the military operations research society of Korea
• /
• v.29 no.1
• /
• pp.43-56
• /
• 2003

This paper is intended to investigate the Build-up Method of SCM(Supply Chain Management) Connection applying EC Standard. SCM helps companies plan and supply to meet customer demand. SCM is the only solution available today that enables an organization to strategize, plan and execute a company's buy, make, move, store, fulfill and service business processes across multiple enterprises for total profitability. The research of modern scientists has thrown new light on the subject. However, the study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM systems, which require to introduce the functions of EC, need to be changed. Summarizations of the main points that have been analyzed in this paper are as follows:. the sharing information for connection and the Rosetta-net standard of the existing SCM system(Order management module(PIP 3A4) of the Rosetta-net specifications for connection by the Rosetta-net). Finally, it shows the process of the gateway for connecting among the existing SCM systems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.95-102
• /
• 2012

It is not easy to establish the correct standard time and standard manhour in a process of small quantity batch production system, especially in a case of irregular quantity of production. Therefore, how to establish rational standard time about manufacturing process of a power cable company which is representative business for small quantity batch production system will be suggested in this paper. Furthermore, how to establish standard manhour which can be used for effective control of labor productivity will also be presented.